Skip to content
0
Sign in Sign up
Training
Categories Setting up and organising your companySales and customer relationsMarketing and visibilityFinance, prices and paymentsTeam and human resourcesLeadership and personal development Training All training coursesCertificate validation
Subscriptions
Trainers
Find a trainerBecome a trainer
Community
Resources
Basket
Change language: French
Training

Masonry, Special Civil Works & Excavation: Certified CFC Training in Switzerland (6-Lesson Programme)

Master masonry & excavations (CFC 201). Swiss certified programme: SIA 118, OTConst, accepted codes of practice, and SUVA site safety.

Table of contents
The 3 Major Site Risks
  1. Financial / Margin: A flatness defect during earthworks (10 mm tolerance under a 2 m straightedge under standard SIA 414) or a trench collapse without shoring leads to illustrative remediation costs of 15 000 to 45 000 CHF. Standard SIA 118 requires the contractor to make good these defects, eroding company margins.
  2. Legal / Parity / SUVA: Failure to slope an excavation exceeding 1.50 m violates art. 68 OTConst, requiring excavations deeper than 1 m 50 that are not propped or shored to be sloped or secured with other appropriate measures. In the event of an accident, any responsible person who intentionally violates the accepted rules of the trade, knowingly endangering the life or physical integrity of individuals, faces a custodial sentence of up to five years or a monetary penalty (art. 229 CP).
  3. Administrative / Acceptance: An inability to provide plate bearing test records at the bottom of the excavation blocks joint verification and acceptance of the work under standard SIA 118. This blockage delays the release of payments and retainage, undermining cash flow.

The CFC 201 / 211.0 certified training programme is aimed at apprentices, qualified operatives, and foremen seeking to strengthen their skills in masonry and special civil works. On Swiss construction sites, mastering technical craftsmanship must go hand in hand with a thorough knowledge of legal requirements. The Construction Work Ordinance (OTConst) sets strict rules to secure trenches. Art. 75 OTConst specifies that the slope of excavation faces and earthworks must match ground resistance, with appropriate measures implemented if ground stability is compromised by heavy rainfall or superimposed loads. The course incorporates these vital requirements to uphold SUVA standards and prevent occupational accidents.

Beyond site safety, this curriculum explores in depth the quality criteria of Swiss technical standards, specifically standard SIA 414 for dimensional tolerances and standard SIA 267 for structural design. Participants learn to document their work rigorously, ensuring compliance during joint verification. Mastering standard SIA 118 allows contractors to understand their contractual obligations and anticipate remediation rights. By combining practical skills with the rules of the National Agreement (CN) for the main construction sector, this academy trains specialists capable of directing work efficiently, safeguarding both project profitability and administrative compliance.

Official Framework and Occupational Profile (Masonry and Special Civil Works)

Bricklaying, masonry, and special civil works related to excavations and earthworks form the bedrock of any construction project in Switzerland. Practising this trade demands absolute rigour, framed by strict legal baselines and technical standards. The course is directly grounded in the vocational training ordinances of the State Secretariat for Education, Research and Innovation (SEFRI), specifically Ordinance No 45103 governing the Bricklayer/Mason CFC trade and Ordinance No 45104 for the Assistant Mason AFP. These regulations define the competencies required to secure the durability of structural works.

Regarding employment conditions, the trade is governed by the National Agreement (CN) for the Main Construction Sector. This collective bargaining framework enforces precise rules regarding wages and working hours, including the FAR early retirement model.

Technically, the execution of masonry work (CFC 201 and 211.0) is governed by Swiss standards. Standard SIA 267 sets geotechnical requirements, while standard SIA 414 specifies dimensional tolerances. Contractual matters, such as warranties and acceptance, are governed by standard SIA 118. Finally, vital safety on the construction site is regulated by the Construction Work Ordinance (OTConst).

Certified Training Programme in 6 Lessons

The programme is organised into six intensive modules, designed to turn theoretical knowledge into operational reflexes on site.

  • L1: Trade Profile, SEFRI Ordinance, CLA/CN Joint Rights (FAR/RESOR) & SIA Normative Framework
    This step establishes the legal foundations. Trainees identify the scope of application of SEFRI ordinances (No 45103 and No 45104). They apply the provisions of the National Agreement (CN) for the Main Construction Sector, including the FAR early retirement scheme. They master the regulatory hierarchy, distinguishing standard SIA 267 from standard SIA 118.
  • L2: Accepted Rules of the Trade, Technical Execution & Operational Actions on Swiss Construction Sites
    This module focuses on on-site execution. Objectives include planning site setup, carrying out structural work in compliance with engineering specifications, and coordinating masonry with special works to ensure overall structural stability.
  • L3: Critical Hold Points, SIA 414 Tolerances, Test Protocols & Substrate Acceptance
    Execution quality takes centre stage. Participants learn to inspect excavation formations, check dimensional tolerances according to standard SIA 414 (in particular flatness), and prepare substrate acceptance logs for site management.
  • L4: Vital SUVA Safety, OTConst Provisions, OELVs & Mandatory PPE/Collective Protection Equipment
    Accident prevention is addressed comprehensively. Skills include sizing collective protective equipment (EPC) according to OTConst, enforcing personal protective equipment (safety helmets under art. 6 OTConst, high-visibility clothing under art. 7 OTConst), and complying with occupational exposure limit values (VLEP).
  • L5: Costed Real-World Loss Case Study, Right to Remediation & Calculation of Price Reductions under SIA 118
    This module tackles the financial consequences of construction defects. Trainees analyse non-conformities under standard SIA 118, formulate a notice of defects, organise the right to make good defects, and calculate the financial impact of a price reduction.
  • L6: Art Construction Practical Application (Mobile Checklists, Vocal Minutes, SIA 451, Magic Link & 30-Question MCQ Exam)
    The final lesson incorporates digital tools. Objectives include operating mobile inspection checklists, logging findings using voice recording, and issuing approval files to the client via secure links.

Training Programme Summary Table

Lesson learned Target competency Evidence or deliverable
L1: Legal and Normative Framework Master SEFRI ordinances and the CN for the Main Construction Sector Joint compliance certificate
L2: Technical execution Execute structural work according to the accepted rules of the trade Execution monitoring report
L3: Quality and Tolerances Inspect surface flatness and record bearing capacity tests Substrate acceptance log
L4: Safety and OTConst Secure excavations and mandate PPE/collective protection equipment Health and safety plan
L5: Claims and Defect Management Apply standard SIA 118 to remedy defects Detailed price reduction calculation in CHF
L6: Digital tools Digitise acceptance and handover workflows Shared technical approval package

Essential Technical and Safety Requirements

Critical Quality Point: Tolerances and Bearing Capacity Tests

Preparing ground formations and earthworks is a decisive project milestone. The programme demands complete mastery of plate bearing tests at the excavation formation level. These geotechnical tests validate the soil deformation modulus and confirm that actual load-bearing capacity matches structural design assumptions. Concurrently, excavation surface flatness is subject to strict requirements. Under standard SIA 414, the maximum permitted tolerance is 10 mm beneath a 2 m straightedge. Non-compliance with this critical requirement leads to concrete overconsumption when pouring strip foundations, directly hurting package profitability. Trainees are taught to operate precision levelling instruments to achieve millimetre accuracy, documenting every survey reading before requesting approval from site management.

Mandatory Safety Gate: Trench and Excavation Protection

Deep excavation works represent one of the most severe hazards on Swiss construction sites. The training programme incorporates an uncompromising safety gate based on the requirements of the Construction Work Ordinance. Under art. 68 OTConst, excavations and earthworks deeper than 1.50 m that are not braced or shored must imperatively be sloped or secured by other adequate measures. Trainees learn to calculate slope angles according to ground stability (art. 75 OTConst). Horizontal clear safety berms alongside excavation edges must measure at least 50 cm wide if the trench is propped or shored, and at least 1 m wide if the wall is sloped (art. 71 OTConst). Furthermore, propping and trench shoring must withstand foreseeable loads (art. 77 OTConst). Access to these working areas is strictly regulated: every ladder used to descend into a trench must project at least 1.00 m above the edge of the excavation, ensuring a safe handhold.

Certification Protocol and Validation of Acquired Skills

Achieving the certification awarded for this course requires rigorous verification of theoretical knowledge and practical competence. The final examination is a timed 30-question multiple-choice questionnaire (MCQ) covering all normative, technical, and safety topics. To pass this assessment, a minimum score of 80% is mandatory.

Beyond theory, candidates must resolve a practical case study involving a dispute based on construction cost indices. This practical test evaluates their ability to quantify the financial impact of defective workmanship. Finally, certification requires mastering a mandatory digital workflow using the dedicated software solutions. Learners must demonstrate their ability to configure an inspection checklist tailored to the specific CFC trade code. They then record joint site inspection minutes using vocal minutes technology. The assessment concludes by securely sharing the completed technical approval submittal with the client via a Magic Link, ensuring end-to-end traceability of all transmitted records.

Illustrative practical cases (typical scenarios on Swiss construction sites)

The figures and project scenarios presented below are illustrative examples created for educational purposes and do not represent actual building sites or existing companies.

Scenario: Partial collapse of an unsecured trench wall
During the construction of a residential building in the Canton of Vaud, a team is contracted to handle earthworks and foundation packages (CFC 211.0). The project involves digging a trench to a depth of 2.20 m. To save time, the site supervisor chooses to excavate vertically without installing trench shoring or cutting back the slopes required by the prevailing soil mechanics.

During an unannounced inspection, the enforcement body identifies this major violation. Pursuant to art. 68 OTConst, any unshored excavation deeper than 1.50 m must be stepped or sloped. The absence of these protective measures triggers an immediate work stoppage across the affected sector. The following day, following heavy rain, part of the trench wall collapses, burying strip footings currently being prepared.

The repercussions of this scenario are extensive. The contractor must price emergency underpinning works and pay for the removal of slipped earth, resulting in substantial unforeseen overheads. Furthermore, the accumulated delay grants no entitlement to a contract time extension under standard SIA 118, as the event is directly attributable to contractor negligence. This case illustrates the vital importance of enforcing safety standards (art. 75 OTConst concerning ground stability) and proves that any breach of the accepted rules of the trade leads to severe financial losses and an unacceptable level of liability for site management.

Free tools by Art Construction

Seventy-eight Swiss calculators and generators to put what you have just read into practice, with no sign-up required.

View the 78 free tools

Frequently asked questions

What is the maximum depth permitted for an unshored trench under CFC 201 training?

Under art. 68 OTConst, excavations and earthworks deeper than 1 m 50 that are not propped or shored must be sloped or secured by other appropriate measures. The training covers these vital safety requirements, including the slope safety assessment required under art. 76 OTConst for heights exceeding 4 m. Negligence can lead to an immediate construction site stoppage and illustrative additional costs in the region of 5'000 CHF.

How does standard SIA 414 govern flatness tolerances for earthworks?

Standard SIA 414 sets strict requirements for substrate acceptance. Within the training, we examine the critical flatness tolerance for earthworks, set at a maximum of 10 mm under a 2 m straightedge. Failure to meet these criteria during plate bearing tests at the excavation bottom justifies a rejection of acceptance by the site management, leading to remedial work whose illustrative cost often exceeds 3'500 CHF.

What are the safety helmet requirements during special masonry works?

Art. 6 OTConst requires safety helmets to be worn during all work where workers may be endangered by falling objects. Helmets must be worn until completion of the structural work, particularly during excavation work and near earthmoving equipment. The SUVA safety module in our course emphasises this personal protective equipment, as a violation exposes the employer to sanctions and triggers criminal liability under art. 229 CP.

In the event of a dispute over a trench wall collapse, how does standard SIA 118 apply?

The case study in Lesson 5 analyzes a partial collapse of an unshored wall. Under standard SIA 118, such an execution defect incurs the contractor's liability, forfeiting any entitlement to a time extension. The contractor must carry out emergency reinforcement at their own expense. The training details the calculation of price reductions and the right to rectification, thereby preventing disputes where illustrative delay penalties can reach 2'000 CHF per working day.

Is time spent in intercompany courses paid for an apprentice mason with a CFC?

Yes, attending intercompany courses is mandatory under art. 23 LFPr, as they complement professional practice and school instruction. This training time forms an integral part of the apprenticeship contract governed by the Code of Obligations (CO) and the national collective agreement (CN Main sector). Apprentices receive their usual wage during these periods. The course also addresses joint body entitlements, including FAR early retirement contributions, which are essential for administrative human resources management on Swiss construction sites.

How can excavation compliance be validated using the digital tools taught?

Lesson 6 of the curriculum incorporates the use of Art Construction software to digitalise inspections. You set up a mobile acceptance checklist specific to CFC 201, documenting plate bearing tests and compliance with art. 77 OTConst on shoring resistance. Joint acceptance minutes are recorded via PV Vocal, and the technical approval file is then shared with the client via Magic Link. This method safeguards the billing of illustrative advance payments in the region of 45'000 CHF.

This CFC 201 certified curriculum in masonry and special works guarantees total mastery of Swiss technical and statutory requirements. From securing excavations under the OTConst to substrate acceptance via standard SIA 414, each lesson boosts your employability. Put theory into practice and digitalise your test reports by deploying our construction site tracking application.

Art Construction is an independent company: it is not affiliated with the SIA, CRB, SUVA, or KBOB. Referenced norms and standards point to publications from these bodies; only official versions are legally binding.