Skip to content
0
Sign in Sign up
Training
Categories Setting up and organising your companySales and customer relationsMarketing and visibilityFinance, prices and paymentsTeam and human resourcesLeadership and personal development Training All training coursesCertificate validation
Subscriptions
Trainers
Find a trainerBecome a trainer
Community
Resources
Basket
Change language: French
Training

Steel Construction & Composite Facades: Swiss CFC Certified Training (6-Lesson Programme)

Master CFC 215 steel construction and composite facades in Switzerland. Certified course: SIA 263 norms, SUVA safety and accepted codes of practice.

Table of contents
The 3 Major Site Risks
  1. Financial / Margin: An offset in concrete-embedded inserts exceeding five millimetres requires fabricating adaptation baseplates. This non-conformity with the SIA 263 norm cuts your margin by around fifteen percent. Immediate duty to notify under the SIA 118 norm is vital to backcharge these extra costs to the mason's work section.
  2. Legal / Joint body / SUVA: Missing certified slings for hoisting profiles or fall-arrest harnesses in aerial work platforms will halt the construction site. Under art. 3 OTConst, the employer plans works to minimise accident risks. A serious breach entails criminal liability for violating recognised codes of practice (art. 229 CP).
  3. Administrative / Acceptance: Lacking torque-tightening records according to the SN EN 1090 norm blocks the joint inspection of the work. This defect delays acceptance under the SIA 118 norm. Furthermore, without a federal certificate of capacity (art. 38 LFPr), having your technical skills validated by site management is compromised.

Governed by SEFRI Ordinance No 42103, the steel builder trade is fundamental to completing structural work and composite facades in Switzerland. This technical profession demands absolute accuracy when assembling steel structures and erecting load-bearing elements. Faced with stringent seismic norms and modern architectural demands, specialists must deliver flawless workmanship. This certification course provides the practical and theoretical skills essential to master layout tolerances and fastening protocols on Swiss construction sites. Every step, from thorough workshop preparation to final on-site erection, is examined against legal requirements and recognised codes of practice.

Strict adherence to technical standards, including the SIA 263 norm for steel structures and the ISO 12944 norm for corrosion protection, underpins this entire vocational course. Participants learn to secure their work by scrupulously applying the Construction Works Ordinance, thereby guaranteeing a safe working environment. The programme examines complex interfaces in detail, particularly anchoring baseplates onto concrete, and how to use digital tools to document joint site minutes. This comprehensive syllabus ensures clients work with highly qualified professionals who adhere to the metalworking CLA and can deliver durable, compliant steel structures.

Official framework and occupational requirements for steel builders

The steel builder trade operates within a strict regulatory framework set by SEFRI Ordinance No 42103 (CFC Steel Builder). This legal basis ensures professionals master complex assembly and erection techniques. Working conditions, wages and early retirement schemes are governed by the metalworking CLA under Metaltec Suisse, including joint parity fund regulations (FAR/RESOR). Technically, all work must strictly comply with a set of standards: the SIA 263 norm and SIA 263/1 norm for steel structures, the SN EN 1090 norm (execution classes EXC2 and EXC3) for structural fabrication, and the ISO 12944 norm for corrosion protection. Contractual terms and warranties are governed by the SIA 118 norm.

Execution quality hinges on non-negotiable criteria. The critical quality tolerance demanded on Swiss construction sites requires tightening high-strength (HR) bolts with a calibrated torque wrench, alongside a layout tolerance for baseplates embedded in concrete strictly below 5 mm. Any deviation compromises structural stability.

Regarding occupational health and safety, the vital safety lock mandates using certified, inspected slings when hoisting heavy sections such as HEB or IPE profiles, as well as MEWP platforms (mobile elevating work platforms) with mandatory fall-arrest harnesses. Pursuant to art. 82 LAA, which sets out general prevention principles, the employer must take all measures to prevent occupational accidents and illnesses that experience has shown to be necessary, that are feasible using the latest technology, and that match the prevailing conditions; employees must assist them, notably by using personal protective equipment. Moreover, art. 17 OTConst requires that, to guard against collapsing structural components or falling objects and materials, measures must be implemented at workstations and access routes so that workers are not exposed to danger.

Certified training programme in 6 lessons

The curriculum is designed to turn theoretical knowledge into operational skills you can apply immediately on Swiss construction sites.

L1: Trade Profile, SEFRI Ordinance, CLA/CN Joint Rights (FAR/RESOR) & SIA Normative Framework

This first stage builds the legal and administrative foundations of the trade. Participants analyse the requirements of SEFRI Ordinance No 42103 to understand the Swiss Confederation's standards. They study the rights and obligations under the metalworking CLA, focusing on joint parity fund contributions and early retirement mechanisms (FAR/RESOR). The objective is to gain an overview of the SIA normative framework to correctly position the steelwork contractor's liability among the project stakeholders.

L2: Best Practice, Technical Implementation & Operational Procedures on Swiss Construction Sites

The second lesson focuses on pure technical practice. Learners break down the requirements of the SIA 263 norm and the SN EN 1090 norm (EXC2/EXC3) for cutting, drilling and welding steel elements. They learn to apply coating and galvanising systems under the ISO 12944 norm. Core competencies include mastering torque tightening of HR bolts and reading and interpreting complex shop drawings to achieve stress-free assemblies.

L3: Critical Hold Points, SIA 414 Tolerances, Testing Protocols & Substrate Acceptance

This phase covers quality management and interfaces with structural work. Participants learn how to verify substrate compliance prior to starting work, a crucial step to avoid inheriting defects from previous trades. They review dimensional tolerances, specifically the layout tolerance for baseplates embedded in concrete, which must remain under 5 mm. Targeted skills include setting up critical hold points, conducting non-destructive testing on welds and thoroughly recording substrate acceptance.

L4: SUVA Vital Safety Rules, OTConst Provisions, OELs & Mandatory PPE/CPE

Safety forms the core of this lesson. Art. 3 OTConst states that works must be planned so that the risk of work accidents, occupational illnesses or health impairments is kept as low as possible; an employer wishing to undertake work as a contractor under a contract for work must assess the necessary occupational safety and health protection measures before entering into the contract; site-specific measures are agreed in the contract for work. Learners absorb the requirement to use certified, inspected slings when hoisting HEB/IPE beams. They study art. 4 OTConst, which dictates that prior to starting work, the employer must ensure there is a plan detailing the measures required for the work to be performed on the construction site, including first-aid arrangements; this plan must be drawn up in writing or in another form capable of providing textual proof. The operation of MEWPs with fall-arrest harnesses is addressed in depth, as is art. 6 OTConst on the obligation to wear a safety helmet during all tasks where workers may be endangered by falling objects or materials, complete with a chin strap, especially when working with fall protection equipment. Lastly, art. 5 OTConst highlights that the employer must appoint a competent safety and health officer on every construction site, empowered to issue directives to workers.

L5: Costed Case Study of an Actual Damage Claim, Right to Remediation & Calculation of Value Reduction under SIA 118

This lesson immerses participants in the contractual and financial management of disputes through a simulation exercise. Working from a reconstructed complex project file, they examine the mechanisms of the SIA 118 norm. Key objectives are learning to draft a notice of defects in proper legal form, understanding the mandatory right to remedying defects, and calculating price deductions when rectification proves disproportionate. Learners acquire the skills needed to defend the company's financial interests while preserving a constructive working relationship with site management.

L6: Practical Application with Art Construction (Mobile Checklists, Voice Reports, SIA 451, Magic Link & 30-Question MCQ Exam)

The final module covers the digitalisation of field operations. Participants gain hands-on practice with modern site management tools. They learn how to structure data exchanges under the SIA 451 standard. Key skills include configuring mobile quality-control checklists, recording joint site minutes using voice-to-report technology, and securely delivering technical submittals to clients via Magic Link. The lesson concludes with preparation for the final exam.

Summary of the training course

Lesson learned Target competency Evidence or deliverable
L1: Trade Profile and Legal Framework Identify SEFRI Ordinance and CLA requirements Summary of joint parity obligations
L2: Technical Rules of the Art Apply SIA 263 and SN EN 1090 norms Torque tightening plan
L3: Tolerances and Acceptance Check baseplate positioning (< 5 mm) Substrate acceptance log
L4: Safety and OTConst Plan hoisting with certified slings Site-specific safety plan
L5: Disputes and SIA 118 Norm Draft an itemised notice of defects Documented calculation of price deduction
L6: Digital Tools Master digital workflows on site File transmitted via Magic Link

Certification protocol and validation of acquired skills

Obtaining certification depends on a rigorous assessment process designed to validate theoretical knowledge alongside practical and digital proficiency. Candidates must prove they can operate independently and in full compliance with Swiss standards.

Theoretical evaluation consists of a 30-question multiple-choice questionnaire (MCQ), timed to simulate rapid decision-making pressure. A minimum passing score of 80 percent is strictly required. This high threshold ensures total mastery of norms, safety regulations and the metalworking CLA rules.

The practical assessment revolves around a technical and financial dispute scenario requiring the application of SIA 118 norm principles and defect remediation costing. In addition, candidates must execute a mandatory software workflow. This workflow covers three essential steps: first, configuring a mobile acceptance checklist tailored to the steel builder trade; second, generating clear, structured joint site minutes using the voice reporting tool; third, securely sharing the technical approval file with the client via a Magic Link. Successfully completing these digital steps confirms the professional's ability to apply modern tools to daily operations.

Illustrative practical cases (typical scenarios on Swiss construction sites)

The scenarios described below are illustrative examples designed to demonstrate how norms and procedures are implemented on a representative Swiss construction site. Figures, companies and circumstances are entirely fictional and serve solely for educational purposes.

Scenario: Handling a substrate defect and duty to notify

On a commercial building construction site in the canton of Vaud, a steel construction company is contracted to erect a structural steel frame and a composite facade. During the prep phase, the site foreman inspects the concrete substrate delivered by the masonry contractor (CFC 211 work section). The survey reveals an 18 mm offset in the inserts embedded in the concrete slab.

This finding is critical. The setting-out tolerance for base plates cast into concrete, which is essential to guarantee the geometry of the steel structure and comply with SIA 263, is strictly under 5 mm. If the metal builder proceeds with installation without reporting this defect, they tacitly accept the substrate and assume liability for any subsequent defects, thereby forfeiting all rights of recourse.

Faced with this situation, the scenario illustrates the immediate enforcement of the duty to notify as defined by SIA 118. The team leader suspends erection in the area concerned and prepares a detailed written notice, submitted promptly to the site management. This document precisely details the 18 mm offset, supported by photographs and surveys, and demonstrates that continuing the works according to the original plans is technically impossible without compromising the safety and quality of the structure.

To solve the technical issue, the engineering office approves the fabrication of custom adapter plates, capable of compensating for the offset while ensuring proper load transfer. This solution incurs substantial extra costs: specialised design studies, urgent workshop fabrication, and extended erection time. By strictly observing the duty to notify prior to any intervention, the steel construction company is fully entitled to issue an addendum. The costs associated with manufacturing the adapter plates and the additional working hours are thus backcharged to trade CFC 211, which caused the initial defect, safeguarding the profitability of the metalwork contract.

Free tools by Art Construction

Seventy-eight Swiss calculators and generators to put what you have just read into practice, with no sign-up required.

View the 78 free tools

Frequently asked questions

What are the setting-out tolerances for base plates cast into concrete according to SIA 118?

When inserts are positioned by the mason, the setting-out tolerance for cast-in base plates is strictly under 5 mm. If an offset is identified, such as 18 mm, the metal builder immediately exercises their duty to notify under SIA 118. Fabricating adapter plates entails additional costs, in the region of 1'500 CHF, which can be backcharged to the structural work package following a joint inspection record.

Which safety measures are mandatory when lifting heavy structural steel sections (HEB/IPE)?

Under art. 82 LAA, the employer must take all measures to prevent occupational accidents that experience has shown to be necessary. When lifting heavy sections such as HEB or IPE, using certified slings is mandatory. Furthermore, art. 6 OTConst requires hard hats with chin straps to be worn. Working at height requires mobile elevating work platforms equipped with fall arrest harnesses to ensure the vital safety of the erectors.

What are the conditions for retaking the CFC qualification procedure for metal builders in the event of failure?

According to art. 33 OFPr, qualification procedures leading to the federal certificate of capacity (CFC) may be retaken a maximum of two times. Examination parts that have already been passed do not need to be repeated. For candidates trained outside a conventional pathway, art. 32 OFPr requires proof of at least five years of professional experience to qualify for admission to this specific qualification procedure.

How can compliance of steel structure execution be ensured according to SN EN 1090?

Execution of steel structures must strictly comply with execution classes EXC2 or EXC3 of standard SN EN 1090, combined with the requirements of SIA 263. This requires rigorous monitoring of bolt tightening with a torque wrench. Applying anti-corrosion paint systems in accordance with standard ISO 12944 ensures the long-term durability of the structure and effectively prevents risks of structural failure over time.

Can an apprentice or erector work overtime during a critical delay on the construction site?

Art. 9 LTr sets the maximum weekly working time at 50 hours for construction workers. In the event of an emergency on the construction site, art. 12 LTr allows an exceptional extension limited to two hours per worker per day. This overtime is paid with a wage premium of at least 25 % pursuant to art. 13 LTr, or compensated with equivalent time off.

Who is responsible for safety during overlapping activities between the mason and the metal builder?

Art. 5 OTConst requires the employer to appoint a competent person responsible for occupational safety on each construction site. Before erecting composite façades, art. 4 OTConst requires a written health and safety plan to be drawn up. In the event of an intentional breach of the recognised rules of construction that knowingly endangers lives during the works, art. 229 CP provides for a custodial sentence or a monetary penalty.

Master the requirements of CFC 215

Training as a metal builder demands absolute precision regarding the Swiss legal framework. From mastering SIA 263 to applying safety directives, every stage determines the project's success.

To support your professional qualification, our academy offers interactive resources. Prepare for your qualification procedures and safeguard your operations with our digital tools.

Assess your skills with our interactive mock exam and discover how our SaaS solutions streamline the management of your acceptance reports.

Art Construction is an independent company: it is not affiliated with the SIA, CRB, SUVA, or KBOB. Referenced norms and standards point to publications from these bodies; only official versions are legally binding.