Skip to content
0
Sign in Sign up
Training
Categories Setting up and organising your companySales and customer relationsMarketing and visibilityFinance, prices and paymentsTeam and human resourcesLeadership and personal development Training All training coursesCertificate validation
Subscriptions
Trainers
Find a trainerBecome a trainer
Community
Resources
Basket
Change language: French
Training

Dual-Flow Ventilation, Air Handling & Smoke Extraction: Certified CFC Training in Switzerland (6-Lesson Programme)

Certified training for CFC 244 ventilation and smoke extraction: master SIA 382/1, SIA 181, EN 12237 duct airtightness and Swiss site safety standards.

Table of contents
The 3 Major Site Risks
  1. Financial / Margin: An airtightness defect under EN 12237 or excessive noise levels under the SIA 181 standard leads to remedial work costing between 15 000 CHF and 45 000 CHF to fit silencers, with retainage on the final account and compulsory rectification under the SIA 118 standard.
  2. Legal / Joint Body / SUVA: The lack of the plan required by art. 4 OTConst or of a competent person designated pursuant to art. 5 OTConst breaches art. 82 LAA; during the installation of heavy ducting, failure to comply with recognised engineering practices falls under art. 229 CP if individuals are endangered.
  3. Administrative / Handover: Missing airtightness test reports under EN 12237 or damper test records under the AEAI fire safety directives leads to refusal of handover under the SIA 118 standard and blocks the municipal occupancy permit.

The trade of ventilation systems installer CFC, governed by SEFRI Ordinance No 46305 and art. 15 LFPr, represents a pillar of building services in Switzerland (CFC 244). On Swiss construction sites, the installation of dual-flow ventilation ducts, air handling units and smoke extraction networks demands absolute airflow and acoustic precision. Installations must satisfy the energy efficiency requirements of standard SIA 382/1, while adhering to the noise limits of standard SIA 181, especially in sensitive premises. In addition, the air tightness compliance of ductwork according to EN 12237 safeguards the thermal efficiency of plant equipment and prevents major air distribution losses.

This six-lesson certificate programme prepares technicians and team leaders governed by the Suissetec CLA for Swiss execution standards. The curriculum incorporates standard analysis, safety planning under art. 3 OTConst, and air hygiene under art. 33 OTConst, as well as the coordination of fire damper compartmentation required by the AEAI fire safety regulations. Learners acquire rigorous methods for substrate handover inspections, on-site measurements, and the contractual management of remediation work according to standard SIA 118. This course ensures a smooth transition to digital site monitoring, guaranteeing full traceability of test records for the site management and the client.

Federal regulatory framework and CFC 244 trade profile

The profession of ventilation systems installer operates at the very core of energy, health and safety requirements for modern buildings in Switzerland. Governed by SEFRI Ordinance No 46305 and structured pursuant to art. 16 LFPr and art. 17 LFPr, this apprenticeship leads to the Federal VET Diploma (CFC) issued by cantonal authorities under art. 38 LFPr. The training prepares professionals to master all air handling systems, dual-flow mechanical ventilation with heat recovery, as well as complex smoke extraction and escape route pressurisation systems.

On Swiss sites, day-to-day operations fall within the collective bargaining framework of the Suissetec CLA, binding employers and employees to strict workmanship standards and specific social schemes, such as early retirement in the finishing work sector. In an authorised training company under art. 20 VPETA, apprentices or qualified fitters taking advanced training build practical skills guided by qualified vocational trainers within the meaning of art. 45 VPETA. Inter-company courses, mandatory under art. 23 VPETA, reinforce proficiency in cutting, assembling and airtight jointing of circular and rectangular ducts in galvanised sheet steel, aluminium or non-combustible composite materials.

Contractually and technically, work under CFC 244 must strictly comply with the SIA 382/1 standard for the design and efficiency of ventilation and air conditioning systems, the SIA 181 standard for building acoustics, and the EN 12237 standard governing ductwork airtightness classes. In public-access premises, underground car parks and high-rise buildings, rigorous application of the AEAI fire safety directives safeguards life safety through fire compartmentation and mechanical smoke extraction.

Curriculum of the six-lesson certification course

The CFC 244 specialist curriculum follows a step-by-step modular path, designed to consolidate theoretical foundations, installation skills and on-site document control habits. Every stage aims to build verifiable expertise aligned with the demands of the Swiss market.

L1: Trade Profile, SEFRI Ordinance, CLA/CN Joint Rights (FAR/RESOR) & SIA Normative Framework

This first lesson establishes the institutional and contractual foundation for professional practice in Switzerland. The learner reviews the provisions of SEFRI Ordinance No 46305 as well as the rights and obligations arising from the apprenticeship contract governed by art. 14 LFPr. The competence objectives aim to:

  • Identifying how the Suissetec CLA terms, joint occupational pension schemes and fitter employment status interact across cantonal construction sites.
  • Interpreting the hierarchy of contract documents under the SIA 118 standard and pinpointing technical liabilities under work section CFC 244.
  • Distinguishing compliance duties imposed by the SIA 382/1 standard and the AEAI fire safety directives applicable to ventilation distributions.

L2: Best Practice, Technical Implementation & Operational Procedures on Swiss Construction Sites

The second lesson focuses on professional trade practices for fabricating, assembling and fastening duct networks. It covers duct handling, frame clinching, mastic seal application and air handling unit connections. The learning objectives cover:

  • Positioning hangers, brackets and anti-vibration channels according to recognised trade rules to prevent any structural acoustic bridge with the structural work.
  • Ensuring thermal continuity and condensation insulation on fresh air and exhaust air ductwork to meet the energy criteria of the SIA 382/1 standard.
  • Fitting flexible duct connectors between motorised units and rigid ductwork to isolate mechanical vibration transmission.

L3: Critical Hold Points, SIA 414 Tolerances, Testing Protocols & Substrate Acceptance

The third module addresses self-inspection and quality control stages before suspended ceilings or technical shafts are closed. It details dimensional tolerance checks under the principles of the SIA 414 standard and section pressure testing. The learning objectives cover:

  • Checking the geometric compliance of block-outs in concrete and validating anchoring supports prior to hoisting heavy ductwork.
  • Applying the pressurisation airtightness test protocol under EN 12237 requirements to confirm the specified duct class.
  • Verifying the alignment and thermal expansion allowance of large-scale rectangular ducts along horizontal runs and vertical risers.

L4: SUVA Vital Safety Rules, OTConst Provisions, OELs & Mandatory PPE/CPE

The fourth lesson addresses the mandatory legal framework governing occupational health and personal safety protection. The instruction details the employer and employee requirements arising from art. 82 LAA and art. 3 OPA, as well as the working hours framework under the Labour Act. The competence objectives aim to:

  • Verify the implementation of the written plan required by art. 4 OTConst and apply the instructions of the competent person designated pursuant to art. 5 OTConst.
  • Comply with the requirement to wear safety helmets under art. 6 OTConst, high-visibility clothing under art. 7 OTConst, and hearing protection under art. 36 OTConst and art. 22 OLT 3.
  • Secure work stations at height when crossing floor openings under art. 25 OTConst or during peripheral operations under art. 22 OTConst and art. 23 OTConst.

L5: Costed Case Study of an Actual Damage Claim, Right to Remediation & Calculation of Value Reduction under SIA 118

The fifth module breaks down the contractual handling of acoustic or airflow non-conformities during project inspection. It teaches how to manage a notice of defects legally under the SIA 118 standard regime. The learning objectives cover:

  • Analysing the impact of an acoustic non-conformity against contract specifications and the requirements of the SIA 181 standard.
  • Determining corrective remedial measures, installing baffle silencers, and technically assessing rectification costs.
  • Drafting a costed technical argument that meets site management requirements for the final account.

L6: Practical Application with Art Construction (Mobile Checklists, Voice Reports, SIA 451, Magic Link & 30-Question MCQ Exam)

The final lesson ensures an operational shift towards digital quality assurance tools and marks full curriculum completion. The participant uses site tracking software features to record quality inspections on site. The learning objectives cover:

  • Filling in and signing off joint inspection sheets on a mobile app when installing volume control dampers and fire dampers.
  • Generating inspection minutes using certified voice dictation with timestamping and geolocation of on-site defects.
  • Submitting technical submittals and test inspection reports to the site management and the client via a single secure link.

Structural overview of the training path

The table below summarises the learning progression, core skills developed and deliverables produced for each course module:

Lesson learned Target competency Evidence or deliverable
L1: Normative and CLA framework Mastery of SIA, SEFRI and Suissetec CLA contractual sources Regulatory and administrative tender analysis checklist
L2: Ductwork and air distribution assembly Compliant execution of duct assemblies and vibration isolation Installation report and thermal and acoustic insulation audit
L3: Tolerances and inspection testing Dimensional checks and duct airtightness qualification Pressurisation test report compliant with EN 12237
L4: Occupational health and safety Application of SUVA prevention rules and federal ordinances Workstation safety plan and PPE verification checklist
L5: Contractual defect management Resolution of acoustic disputes and costing of remedial works Technical statement in response to a notice of defects under SIA 118
L6: Digitisation and validation Validation of digital inspection forms and final exam sitting Complete digital as-built record and certificate of achievement

Technical requirement criteria and safety hold points

Completing the programme requires mastering the quality thresholds enforced on Swiss construction sites. In terms of workmanship performance, the primary quality hold point is set as: Air duct airtightness class B or C (EN 12237) and bedroom sound pressure level < 28 dB(A) under SIA 181. Duct airtightness underpins indoor air hygiene, prevents heat losses and maintains balanced design airflows at supply diffusers.

For the physical protection of workers and building occupants, federal standards require a strict safety hold point: Compliant telescopic material lifts for overhead ductwork; functional release testing of AEAI fire dampers. Banning manual overhead handling of heavy loads protects fitters against musculoskeletal disorders and falling components, while systematically checking the mechanical and electrical release of fire dampers guarantees the fire resistance of breached partitions in accordance with the AEAI fire safety directives.

Certification protocol and final examination

Professional qualification is obtained through a rigorous assessment procedure aligned with the competence assessment rules defined in art. 30 VPETO and art. 33 VPETA. Candidates must satisfy the following requirements:

  • Pass the timed theoretical examination comprising 30 multiple-choice questions covering SIA regulations, indoor air hygiene, acoustics and occupational safety, with a minimum pass mark of 80% correct answers.
  • Resolve a quantified practical dispute scenario, involving the analysis of construction site data and calculating the economic impact of rectification according to reference ranges.
  • Validate the mandatory operational digital workflow: configuring the mobile handover checklist specific to CFC 244, recording a formal joint site report using certified voice dictation, then sharing the complete technical approval file with the client via a secure Magic Link.

Illustrative practical cases (typical scenarios on Swiss construction sites)

The figures presented in the scenarios below are illustrative examples intended for the technical and contractual analysis of construction site events, designed for the professional training of practitioners.

In the canton of Vaud, the construction of a residential complex of 24 penthouse apartments required the installation of a dual-flow air handling unit on the plant roof, connected to vertical distribution risers serving the top-floor bedrooms. The installation team comprised a lead fitter and three qualified tradespeople under CFC 244. During commissioning tests at nominal flow rate, acoustic measurements taken in two bedrooms revealed a continuous sound level of 35 dB(A), representing an exceedance of +7 dB(A) in the penthouse due to omitted baffle silencers on the AHU: classified as a major defect and resulting in a retainage on the final account until the sound attenuators were installed.

Faced with this immediate non-compliance regarding the regulatory threshold of standard SIA 181, the site management issued a notice of defects under the rules of standard SIA 118, suspending payment of the contractor's outstanding balance of 32 000 CHF. The expert assessment scenario ruled out a price reduction, prioritising the imperative right to rectification. The technical solutions selected involved removing the initial rectangular duct sections at the unit's discharge, inserting a set of sound-absorbing baffle silencers sized to attenuate the fans' low and medium frequencies, and then installing compliant elastomeric flexible connections.

Following rectification and new joint measurements, the residual sound level stabilised at 26 dB(A), thereby lifting the technical reservation and permitting the full release of the contractual financial withholdings.

Free tools by Art Construction

Seventy-eight Swiss calculators and generators to put what you have just read into practice, with no sign-up required.

View the 78 free tools

Frequently asked questions

How is ductwork airtightness verified under standard EN 12237?

Handover of a ventilation ductwork system requires a pressurisation test in accordance with standard EN 12237 to validate Class B or C. The installer injects a test airflow and records any residual leakage. If fitting joint defects are found, joint remediation is required pursuant to standard SIA 382/1. Reworking the airtightness generates an indicative estimated cost in the region of 3800 CHF for the contractor.

What maximum noise threshold applies in bedrooms under standard SIA 181?

Standard SIA 181 sets a sound pressure level of less than 28 dB(A) in bedrooms for building services installations. To ensure this acoustic comfort, the technician installs silencers and acoustically decouples ductwork from masonry walls. An unjustified exceedance constitutes a defect within the meaning of standard SIA 118, leading to acoustic rectification work with an indicative cost of around 4200 CHF.

What protective measures govern duct lifting under the OTConst?

The employer applies art. 82 LAA and art. 3 OPA to prevent accidents during heavy handling operations at height. Pursuant to art. 17 OTConst, physical protective measures must prevent components from falling during fastening, requiring compliant telescopic material lifts. The health and safety plan provided for in art. 4 OTConst records these resources. Any deliberate failure that endangers third parties incurs criminal liability under art. 229 CP.

How is the functional testing of fire dampers performed on site?

Testing is based on the AEAI Fire Safety Directives and standard SIA 382/1. The team carries out individual mechanical and electrical tripping to verify the airtight closure of the fire damper blade and the return signal to the ventilation control unit. The automatic ventilation shutdown upon alarm is validated simultaneously. The absence of this test inspection report prevents the municipal authority from issuing the occupancy permit, blocking end-of-job payments.

What conditions govern adult access to the CFC 244 via the OFPr?

Pursuant to art. 32 OFPr, a skilled worker without a formal qualification who can prove at least five years of practical experience may enter the qualification procedure. The candidate takes the examinations organised under art. 33 LFPr to demonstrate their skills in ventilation and air distribution. Passing awards the federal certificate of capacity under art. 38 LFPr, conferring entitlement to the remuneration and professional classifications established by the Suissetec CLA in the trade.

How is a noise dispute on a rooftop AHU settled contractually?

An excessive noise level of +7 dB(A) constitutes a construction defect under standard SIA 118. The site management serves a notice of defects and suspends payment of the invoice balance until the disturbance is fully remedied. The contractor installs compliant baffle silencers on the rooftop unit. This technical rectification incurs a typical corrective cost of around 6800 CHF, borne entirely by the subcontractor.

Validation of skills and CFC 244 trade mastery

Mastering ventilation installation, smoke extraction, and airflow balancing demands absolute technical and contractual rigour on Swiss construction sites. By integrating the tolerances of standard SIA 181, the AEAI Fire Safety Directives, and EN 12237 airtightness protocols, qualified technicians ensure compliant and durable installations. Use the digital modules and airflow calculators to secure your project handovers.

Art Construction is an independent company: it is not affiliated with the SIA, CRB, SUVA, or KBOB. Referenced norms and standards point to publications from these bodies; only official versions are legally binding.