Table of contents
The 3 Major Site Risks
- Financial / Margin: Agreement error leading to retroactive wage and joint contribution back-payments in the tens of thousands of CHF over three years, pursuant to art. 322 CO.
- Legal / Joint Body / SUVA: Joint committee audit finding false trade classification, followed by inspection fees and administrative penalties provided for by extended collective agreements via the LECCT.
- Administrative / Acceptance: Blocking of joint compliance certificates required for cantonal public procurement and exclusion from tenders due to lack of a valid certificate from the competent joint body.
For business owners, site managers and human resources managers in French-speaking Switzerland, identifying the governing collective labour agreement is a critical preliminary legal assessment. The boundary between the National Collective Labour Agreement for the main construction trade (CN Structural Work), the CLA for French-speaking Swiss finishing work (SOR), the CLA for the Swiss building services trade (Suissetec) and that of the electrical installation trade (EIT.swiss) hinges on the company's predominant operational activity.
Incorrect classification exposes SMEs to retroactive wage adjustments and jeopardises their compliance on public and private construction sites. This technical guide outlines the objective criteria for liability, the impact of extension decrees under the Federal Act on the Extension of the Scope of Collective Labour Agreements (LECCT), and the rigorous management of multi-trade or mixed business structures.
Subjection criteria and activity scoping in French-speaking Switzerland
Whether a craft or engineering firm is subject to a CLA depends on the economic activity actually performed in the field. Extending the scope through a federal or cantonal decree, pursuant to art. 1 LECCT and art. 2 LECCT, makes the regulatory provisions mandatory for employers in a given sector. Where multiple trades coexist within the same legal entity, the principle of predominance applies: the activity accounting for the largest volume of productive hours determines the applicable collective agreement.
The individual employment contract remains the contractual baseline under art. 319 CO, but the employer must pay the wage set by the applicable collective agreement pursuant to art. 322 CO. The breakdown of workshop, installation and technical office staff requires meticulous working-time recording as required by art. 73 OLT 1, in order to substantiate the allocation of working hours during joint committee audits.
Comparative table of the four main construction collective agreements
Each collective agreement defines its professional scope, its oversight bodies and its early retirement or training funds:
| Assessment criterion | CN Structural Work | SOR CLA (Finishing Work) | Suissetec CLA | EIT.swiss CLA |
|---|---|---|---|---|
| Covered activities | Earthworks, masonry, reinforced concrete, civil engineering, demolition | Plastering, painting, joinery, tiling, glazing, parquet flooring | Plumbing & Sanitary Installations, Sheet-metal Work, heating, ventilation, air conditioning | Electrical installations, telecommunications, home automation, network infrastructure |
| Joint oversight body | National Joint Committee (CPN) and local joint committees | Joint professional committee for French-speaking Swiss finishing work | National joint committee for the building services trade | National joint committee for the electrical installation sector |
| Sector-specific early retirement | FAR Foundation (main construction trade) | RESOR Foundation (French-speaking Swiss finishing work) | Sector-specific early retirement scheme | Occupational pension scheme according to sector statutes |
| Vocational training | Joint training fund, CFC bricklayer under art. 38 LFPr | Employer and joint fund, apprenticeship under art. 14 LFPr | Suissetec training fund, inter-company courses art. 23 LFPr | EIT.swiss training fund for certified CFC electrician-installers |
| Workshop vs on-site installation distinction | Site workers and plant operators directly affiliated | On-site installers and integrated joinery workshops | Workshop prefabrication and on-site system installation | Workshop panel builders and on-site electrical installers |
Frequent classification errors and financial consequences
Disputes frequently arise when a general contractor or multi-trade contractor diversifies its services. Four interpretation errors lead to substantial adjustments:
- Confusing structural work with finishing work: Classifying tiling or plastering crews under the CN Structural Work simply because they work on a reinforced concrete construction site. Interior finishing personnel fall under the SOR CLA.
- Underestimating technical installations: Treating heat pump connections as simple exempt pipework, whereas the activity falls under the Suissetec CLA or EIT.swiss CLA for the electrical control components.
- Failing to break down by operating division: Keeping a mixed company under a single agreement without accounting separation between autonomous departments. A joint committee will require the application of distinct wage scales.
- Non-compliance with staff leasing rules: Using temporary staff without verifying that the leasing agency applies the provisions of the extended CLA of the host sector, in accordance with art. 20 LSE.
In the event of an erroneous classification over three financial years for a crew of five installers, contribution arrears to early retirement and training funds commonly reach 45'000 CHF to 90'000 CHF, not including joint procedure costs.
Illustrative practical cases (typical scenarios on Swiss construction sites)
The following situations are illustrative examples designed to clarify collective agreement assignment decisions in French-speaking Switzerland.
Scenario 1: Plumbing & Sanitary Installations and ventilation SME in the Canton of Vaud
A Lausanne-based SME employs 14 installers for residential building renovation projects. Work includes replacing drinking water pipes, fitting air ducts and installing water softeners. Management hesitated between the SOR CLA and the Suissetec CLA. Because all activities fall within building services, the company confirmed its full subjection to the CLA for the Swiss building services trade (Suissetec), affiliating its installers with the sector's vocational training fund.
Scenario 2: Masonry company operating an integrated tiling workshop in Valais
A Sion-based company employs 22 masons working in structural work and hires 4 tilers to carry out finishing work. Management set up a separate division for tiling work in order to keep installation hours distinct. The masons remain subject to the CN Gros Œuvre (with FAR contributions), while the tilers are registered under the finishing work CLA, with contributions paid to the relevant joint committee, thereby preventing any risk of an inter-branch dispute.
Wages and social charges: free tools
Real cost of a tradesperson, employer contributions by canton, meal and travel allowances, notice periods under the collective agreement.
Frequently asked questions
How should an SME combining masonry and tiling be assigned?
The predominant main activity determines subjection. If structural work dominates, the National Collective Labour Agreement applies, with an indicative wage in the region of 6'200 CHF, pursuant to the collective agreement and federal law.
Can an electrician-installer be subject to the SOR CLA?
No. Electrical installations fall exclusively within the EIT.swiss collective scope extended via art. 1 LECCT, which excludes the scope of the French-speaking Swiss finishing work CLA for these specific trades.
Which overtime rules prevail between the CO and the collective agreement?
The collective agreement takes precedence over art. 321c CO. Industry agreements set specific premium rates or compensation schemes as soon as the standard weekly working hours stipulated in the agreement are exceeded.
Which agreement governs plumbing, sanitary and heating installations in Switzerland?
The extended Suissetec CLA governs these technical trades. It imposes minimum scales, for example in the region of 5'800 CHF for a qualified CFC installer, monitored by the joint committee.
What obligations apply when hiring temporary staff?
Under art. 20 LSE, the staff leasing agency must pay the wages and observe the working hours stipulated by the extended CLA applicable to your client enterprise on the construction site.
How should a posted worker on a site in French-speaking Switzerland be handled?
The foreign employer must guarantee net minimum wages pursuant to art. 2 LDét. The contracting builder must verify compliance to fulfil the duty of due diligence set out in art. 8c ODét.
Determining the exact collective agreement for your SME protects your contractual commitments and wage accounting against joint audits. To learn more about your obligations as a construction employer, explore our dedicated guides:
- Employer Social Security Contributions in Swiss Construction: AVS, LPP, SUVA, IJM, FAR/RESOR and Joint Committee Audits
- 1st Pillar and Unemployment (AVS/AI/APG 5,3 % + AC 1,1 % up to 148'200 CHF): Calculations and Annual Settlement
- 2nd Pillar LPP in Construction: Entry Threshold, Coordinated Salary and Retirement Credits by Age Bracket
- Compulsory SUVA (LAA) Affiliation in Construction: BU/NBU Tariff Classes and Bonus-Malus System