Skip to content
Practical guide

Importing and Cleaning a Surveyor DWG / DXF File (Swiss MN95 Coordinates) Without Overloading Your Plan

Swiss method to import and clean a surveyor DWG or DXF in MN95 coordinates without overloading your CAD file or moving the project origin.

Table of contents
The 3 Major Site Risks
  1. Financial / Margin: Spatial layout error resulting in adaptation extra costs in the range of 15 000 CHF to 45 000 CHF during earthworks, triggering liability under art. 365 CO if the provided land data is not checked.
  2. Legal / Joint Body / SUVA: Tracing error on excavation limits that may compromise the stability of neighboring structures, triggering criminal liability under art. 229 CP in the event of endangerment to life or limb during execution.
  3. Administrative / Acceptance: Rejection of the execution file or dimensional tolerance dispute during inspection of the work under standard SIA 118, caused by the inaccuracy of a drawing cluttered with non-georeferenced stray elements.

Integrating an official cadastral survey in Swiss national coordinates MN95 is an essential initial step for any architect, civil engineer or draughtsman in Switzerland. A raw DWG or DXF file commonly contains millions of unnecessary entities, nested blocks, dense hatch patterns and non-standardized layers that bog down the architectural project and cause major slowdowns in CAD software.

Working more than two million meters away from the software origin causes display glitches and geometric rounding errors. This guide details the technical protocol to purge these cadastral files, isolate parcel boundaries and correctly set a local reference point without compromising the official Swiss geodetic system or disrupting interdisciplinary exchanges.

Technical protocol for cleaning and optimizing a DWG or DXF file

Directly importing a cadastral dataset into architectural drawing software without preliminary processing exhausts RAM and degrades graphical precision. An official survey by a licensed surveyor includes thousands of 3D vertices, contour line meshes and disparate text style definitions. A rigorous method requires processing the source file in an isolated environment prior to any insertion into the building's execution model.

Step 1: Initial diagnosis and removal of superfluous entities

Open the surveyor's DWG or DXF file in a blank session. Turn on and unfreeze all hidden or frozen layers to obtain a comprehensive view of the contents. Immediately delete non-constructive elements: surveyor title blocks, bulky legends, embedded raster logos, text annotations of distant parcels and dense road hatching. Complex hatch patterns exponentially multiply the number of vectors computed by the graphics processor.

Step 2: Selective explosion and full database purge

Nested blocks often conceal geometric duplicates. Explode non-parametric blocks that hinder layer isolation once, while preserving point elevation blocks. Then run a deep purge of the file database to delete obsolete dimension styles, orphaned block definitions, unused line types and empty layers. Run an audit and repair command to fix corrupted object tables.

Step 3: Layer filtering and MN95 coordinate management

The Swiss national survey MN95 positions coordinates with seven significant figures for the Easting axis (around 2 600 000 m) and the Northing axis (around 1 200 000 m). Working directly at this distance from the software origin (0,0,0) causes display artifacts and rounding errors in geometry engines. The Swiss procedure consists in keeping the surveyor's official tie-in point on an identified boundary marker, then referencing this offset to the project origin without arbitrarily moving the drawing without a setup record.

Comparison table: Raw processing vs Standardized cleaning protocol

Technical criterionDirect raw importOptimized cleaning protocolOperational impact on the project
DWG file size15 Mo to 45 Mo depending on area800 Ko to 2,5 Mo after purgingSmooth navigation and instant network synchronization
MN95 origin handlingKept at 2 600 000 m from zeroLocal origin and geodetic reference pointElimination of cursor jitter and precision glitches
3D objects and elevationScattered 3D points and polylinesElevation sorting and 2D flattening if requiredPrevention of object snaps to incorrect elevations
Layer structureOver 80 disparate layersIsolation of parcel and boundary layersEnhanced readability for building permit application drawings
Superfluous entitiesDense hatching and nested blocksPurging of empty blocks and orphaned stylesSoftware stability when generating section cuts

Common import errors and financial consequences

The most widespread mistake is manually moving the cadastral plan to the origin (0,0) without recording the X, Y and Z translation vectors. This practice prevents any future updates when receiving an as-built survey of underground utilities or pipe routing from the surveyor. Layout adjustments during the execution phase generate additional design costs in the range of 4 500 CHF to 12 000 CHF to recalculate the positioning of Special Foundations.

A second mistake lies in failing to check the insertion units. Importing a surveyor file in meters into a template configured in millimeters scales everything up by a factor of one thousand, distorting the calculation of determining surfaces under standard SIA 416. If non-compliance is identified during review by the municipal building control authority, a full overhaul of drawings causes avoidable scheduling delays and contractual penalties.

Illustrative practical cases (typical scenarios on Swiss construction sites)

The figures and situations presented below are illustrative examples designed for methodological learning.

Standard scenario: Multi-family residential building in the canton of Vaud

An architectural firm of six employees is developing a 14-unit collective housing project on a sloping parcel in the canton of Vaud. The official surveyor delivers a 32 Mo DWG file containing the digital terrain model, protected trees, underground utilities and neighboring parcel boundaries in MN95 coordinates.

Faced with such an unwieldy file, the draughtsman applies the rigorous protocol: he isolates the layers for property boundaries, rights of way and original ground elevation points. He deletes dense hatching on adjacent cantonal roads and purges 140 orphaned nested blocks. The resulting file weighs just 1,8 Mo. He records the MN95 coordinates of an official fixed boundary marker as the project reference point. This method made it possible to produce earthworks drawings in full compliance with building control building envelopes without any hardware lag.

Surfaces, standards and permits: free tools

SIA 416 floor areas and volumes, cantonal zoning ratios, U-values and dew points, acoustics, planning enquiry requirements.

View engineering tools

Frequently asked questions

How can you manage MN95 coordinates without graphical distortion?

To avoid display artifacts without shifting the official georeferencing, move entities to the local origin and compensate for this offset using the base point in accordance with standard SIA 118.

What does an elevation insertion error cost on earthworks?

A leveling discrepancy leads to additional costs in the range of 15 000 CHF to make up for excavation work, while risking disputes over quantity take-offs under standard SIA 118.

Should hatching and nested blocks from the cadastral survey be purged?

Yes, purging complex hatching and exploding blocks cuts file size by roughly 70 %, preventing costly crashes estimated in the range of 1 200 CHF in lost time.

What legal liability arises from a layout error originating in the DWG?

Failing to observe building envelopes breaches the Federal Act on Spatial Planning and triggers liability for defects under art. 368 CO, exposing the lead consultant to full rectification costs.

How do you coordinate the cleaned model with specialist technical consultants?

Issue a streamlined file with a documented project origin and locked cadastral boundaries, ensuring seamless alignment across all documentation under the Federal Act on Spatial Planning.

Does the surveyor always provide elevations tied to LN02?

Surveyors supply official elevation benchmarks that must be verified thoroughly before excavating, or you risk costly physical remediation in the range of 8 500 CHF under art. 368 CO.

Validating the surveyor's data ensures a smooth transition from the official cadastral survey to the execution drawings. Explore our supplementary guides:

Art Construction is an independent company: it is not affiliated with the SIA, CRB, SUVA, or KBOB. Referenced norms and standards point to publications from these bodies; only official versions are legally binding.