Skip to content
Practical guide

Net Living Areas for Off-Plan Sales and Calculation of PPE Shares in Switzerland

Calculation of net living areas and PPE shares for off-plan sales in Switzerland according to the SIA 416 standard and the Civil Code (CC).

Table of contents
The 3 Major Site Risks
  1. Financial / Margin: A discrepancy in quantities taken off plans leads to price reduction claims in the range of 30 000 CHF to 80 000 CHF per unit in off-plan sales pursuant to art. 368 CO.
  2. Legal / Joint bodies / SUVA: Disputing co-ownership shares established without a compliant floor area baseline exposes parties to civil litigation under art. 712a CC, as each condominium owner has an exclusive right to use and fit out specific parts of a building internally.
  3. Administration / Acceptance: A divergence between the advertised sales area and the final execution blocks the drafting of final notarial deeds and delays joint verification during acceptance of the work under standard SIA 118.

This guide is aimed at architects, draftsmen and developers preparing execution plans and off-plan sales dossiers in Switzerland. The accurate determination of net floor areas under standard SIA 416 forms the essential foundation for securing enterprise contracts and safeguarding real estate transactions against buyer claims.

A rigorous quantity takeoff method prevents distortions in the allocation of condominium shares (millièmes) and the apportionment of the building's future operating charges. Here, we detail the space allocation rules and weighting coefficients applied to secondary areas to ensure full consistency between technical drawings and legal deeds.

Calculation method for net floor areas and weighting of co-ownership shares

Rigorous calculation of floor areas for off-plan sales relies on distinguishing between main usable floor area and ancillary areas. Within condominium ownership governed by art. 712a CC, the architect must accurately determine the footprint of exclusive units relative to common parts. The net habitable floor area is measured between the finished internal faces of perimeter walls, deducting interior partition walls, door reveals, bricked technical shafts and vertical structural elements.

To prepare the sales plans appended to the notarial deed, designers convert gross structural dimensions into finished dimensions by deducting standard thicknesses for plastering and thermal wall linings. A frequent omission involves including shared ventilation shafts in the buyer's private floor area, creating a contractual distortion with regard to the fixed lump-sum price provided for in art. 373 CO.

The allocation of condominium shares requires methodical weighting. The net usable floor area serves as the baseline criterion, adjusted by utility and location coefficients:

  • Floor level: progressive mark-up for upper storeys benefiting from enhanced sunlight.
  • Compass orientation: higher valuation for south and west exposures compared to northern aspects.
  • Private outdoor areas: application of a reduction coefficient to balconies, loggias and terraces.
  • Ancillary rooms: inclusion of cellars and storage rooms using appropriate equivalence factors.

Comparison table of geometric elements in condominium share allocations

The table below summarises the rules for accounting for different spaces when drafting sales drawings and calculating shares in condominium ownership:

Construction element or space Legal status (art. 712a CC) Inclusion in net floor area Typical weighting for shares Direct contractual impact
Living room, bedrooms, kitchen Exclusive private right 100 % of measured area Full coefficient (1.00) Primary basis for the lump-sum price
Open balcony Special right of use Excluded from net habitable floor area Reduced coefficient (0.25 to 0.35) Explicit mention in the descriptive schedule
Thermally insulated loggia Exclusive private right 100 % if integrated into the envelope Adjusted coefficient (0.70 to 1.00) Risk of dispute over legal qualification
Shared technical shafts Mandatory common part Strict deduction mandatory No private weighting (0.00) Deficiency in area pursuant to art. 368 CO
Individual basement cellar Exclusive right or distinct use Excluded from habitable floor area Ancillary coefficient (0.10 to 0.20) Maintenance costs in the PPE regulations
Window and door reveals Exclusive private right Deduction within inner wall face Not counted (0.00) Cumulative dimensional variance on the work

Common drafting errors and financial repercussions on the works

During the execution phase, poor coordination of openings reserved for soil and ventilation stacks is a recurring anomaly. When a technical shaft encroaches by 0,35 m² into a kitchen relative to the contractual sales plan, the buyer may claim a defect of conformity in the work within the meaning of art. 367 CO. In Swiss property developments with high market values, such a reduction in floor area frequently triggers price reduction claims under art. 368 CO, reaching an order of magnitude of 3'500 CHF to 6'000 CHF per flat.

Another common oversight is failing to deduct internal perimeter insulation in habitable attic spaces. Failure to comply with clear ceiling heights leads to recalculations of net usable areas after execution. If the descriptive quote was sealed based on incorrect measurements, the site management faces a warranty claim for construction defects governed by art. 371 CO, with the client shifting financial liability onto the designer.

Illustrative practical cases (typical scenarios on Swiss construction sites)

The figures presented in the following scenarios are illustrative examples developed for technical and legal analysis.

Typical scenario 1: Regularisation of ventilation shafts in a 12-unit building (Canton of Vaud)

On a construction site for a condominium building in Lausanne, the engineering firm failed to include on the sales plans a 12 cm thickening of acoustic wall linings separating living rooms from lift shafts. During the installation of lightweight partitions, the commissioned surveyor identified an average loss of 1,20 m² of net habitable floor area across all six 4.5-room units. The client was served with a formal notice of defects by the buyers within the statutory time limit of art. 367 CO. Conciliation resulted in a lump-sum compensation of approximately 14'400 CHF per buyer, charged against the planning fees.

Typical scenario 2: Share discrepancy in an upscale residence (Canton of Valais)

In an 8-penthouse project in Sion, the architect allocated identical co-ownership shares to similar layouts without weighting the varying depths of private terraces (special rights of use under art. 712a CC). The purchasers of the units with smaller terraces demanded an adjustment of the allocation schedule prior to final registration in the land register, blocking the payment of final advance payments governed by art. 372 CO and causing financial delays for the development.

Surfaces, standards and permits: free tools

SIA 416 floor areas and volumes, cantonal zoning ratios, U-values and dew points, acoustics, planning enquiry requirements.

View engineering tools

Frequently asked questions

What net floor area tolerance applies in an off-plan sale?

Under the Code of Obligations and standard SIA 416, a dimensional variance can warrant a price reduction estimated, as an illustrative figure, in the region of 20000 CHF.

How are balconies weighted in PPE shares?

The deed of constitution based on art. 712a CC usually assigns a reduced weighting to outdoor areas, producing a variance in routine service charges estimated at an illustrative value of around 400 CHF annually.

Which contractual document definitively sets the PPE shares of a lot?

The allocation plan registered in the land register pursuant to art. 712a CC is authoritative, preventing communal service charge allocation disputes illustrated by an amount of around 1200 CHF.

Which standard governs the precise measurement of net habitable floor areas?

Professionals apply standard SIA 416 to calculate usable floor area, avoiding drawing measurement errors that could prompt a corrective shortfall valuation in the region of 25000 CHF during property acquisitions.

How can one challenge an area non-conformity upon delivery of the work?

In accordance with the Code of Obligations, the buyer must promptly report any noted defects, giving rise to an entitlement to remediation or compensatory indemnification of around 10000 CHF based on the actual loss.

Do cellars and parking spaces alter condominium share calculations?

Yes, under art. 712a CC, these ancillary spaces are assigned reduced coefficients, adjusting the annual contribution to common expenses by an indicative impact of around 300 CHF per covered space.

To examine floor area calculations on your drawings in greater depth, explore our dedicated guides:

Art Construction is an independent company: it is not affiliated with the SIA, CRB, SUVA, or KBOB. Referenced norms and standards point to publications from these bodies; only official versions are legally binding.