Table of contents
The 3 Major Site Risks
- Financial / Margin: An inaccurate boundary between usable floor area (SU) and construction area leads to a financial estimation discrepancy of around 5 to 12 % on gross yield in CHF, distorting the economic assessment under art. 365 CO.
- Legal / Joint Body / SUVA: Incorrect classification of circulation areas (SD) compromises the legal compliance of the file and leads to the refusal of the building permit by the competent authority under art. 22 LAT.
- Administrative / Acceptance: Inadvertently including installation area (SI) in living areas halts processing by the municipality and delays inspection of the works under standard SIA 118.
This methodological guide breaks down the division of floor area (SP) defined by standard SIA 416, intended for Swiss architects, draughtspersons and engineers. Distinguishing accurately between usable floor area (SU), circulation area (SD) and installation area (SI) forms the essential foundation for dimensioning each level rigorously and making the digital model reliable.
Such geometric rigor guarantees that planning application drawings match municipal requirements and secures element-based construction cost calculations. By avoiding any confusion regarding external areas, design offices prevent measurement disputes when preparing the area schedule.
Typology and Regulatory Breakdown of Areas under Standard SIA 416
The geometric breakdown of a building follows a strict hierarchy that rules out any approximation during floor plan dimensioning. Floor area (SP) encompasses net area (SN) and construction area (SC). Net area is subdivided individually into usable floor area (SU), circulation area (SD) and installation area (SI). External areas (SE) remain outside this perimeter, as they do not belong to the enclosed floor area.
For every polygon boundary on execution drawings or planning application drawings submitted to the municipality under art. 22 LAT, the draughtsperson must apply precise physical delimitation criteria:
- Usable floor area (SU): Portion of the net area allocated to the primary intended purpose of the building (dwellings, offices, manufacturing workshops, retail premises). It is measured between the finished internal faces of the bounding building elements.
- Circulation area (SD): Portion of the net area reserved exclusively for internal circulation (corridors, stairwells, floor landings, lift lobbies). It ensures occupant evacuation and functional connections.
- Installation area (SI): Portion of the net area dedicated to building services installations (boiler rooms, ventilation plant rooms, plumbing substations, accessible vertical service shafts).
- Construction area (SC): Area occupied by external walls, internal load-bearing walls, pillars and fixed partitions. It represents the structural difference between gross floor area and net area.
- External area (SE): Areas not enclosed on all sides, such as open balconies, unheated loggias, accessible terraces and external access walkways.
Summary Area Classification Table under Standard SIA 416
| Area category | Geometric and functional definition | Inclusion in SP | Standard elements represented | Required geometric check |
|---|---|---|---|---|
| Usable floor area (SU) | Premises directly serving the intended use of the building | Yes | Living rooms, bedrooms, kitchens, individual offices, operating theatres | Dimensioning between internal finished surfaces |
| Circulation area (SD) | Access routes and internal communal or private circulation | Yes | Entrance halls, distribution corridors, internal stairs, ramps | Verification of continuous clear passage width |
| Installation area (SI) | Rooms and shafts dedicated to technical building services | Yes | HVAC rooms, main distribution boards, accessible service ducts | Strict deduction of unfloored openings |
| Construction area (SC) | Footprint of load-bearing or dividing building elements | Yes | Reinforced concrete walls, pillars, thermal lining walls, lightweight partitions | Centreline measurement or gross perimeter minus SN |
| External area (SE) | Open or partially enclosed areas located outside the building envelope | No | Cantilevered balconies, open loggias, roof terraces | Boundary excluded from the level's net area |
Frequent Measurement Errors and Operational Repercussions
Incorrectly including a loggia enclosed by removable glazing in external areas (SE) rather than in floor area (SP) alters the land-use ratios. This oversight leads to the application being blocked by urban planning departments during the coordinated planning enquiry procedure under art. 25a LAT.
A recurring error involves treating small through-floor service penetrations as installation area (SI). If the floor opening is not accessible on foot, this area constitutes construction area (SC). Such an anomaly generates disputes when ordering prefabricated elements or compiling tender quantity take-offs. These input discrepancies cause adjustment extra costs of roughly 15'000 CHF to 45'000 CHF when coordinating technical trade packages.
Illustrative practical cases (typical scenarios on Swiss construction sites)
The following figures are illustrative examples intended to model the impact of rigorous classification on representative projects.
Standard scenario: Multi-family residential building in the Canton of Vaud
On an 18-unit rental housing project submitted to the municipal sanitation commission, the design team evaluates floor landings and lift shafts. The draughtsperson initially classified unfloored building service voids of 1,20 m² per floor as installation area (SI). Adjustment in compliance with standard SIA 416 reclassifies these surfaces as construction area (SC). This adjustment restores the exact net area without altering the total floor area. This correction protects the designer's contractual commitments and ensures full compliance of the building permit application.
Standard scenario: Commercial and light industrial building in the Canton of Fribourg
For an engineering office housing 25 staff members, a central corridor provides access to offices and serves two computer server rooms. The server room area was mistakenly allocated to circulation areas (SD). Methodological correction reassigns these spaces to installation area (SI) for network cabinets and to usable floor area (SU) for workstations. Mechanical ventilation and compressed air capacity are recalibrated to real values, preventing an estimated technical shortfall of 28'000 CHF.
Surfaces, standards and permits: free tools
SIA 416 floor areas and volumes, cantonal zoning ratios, U-values and dew points, acoustics, planning enquiry requirements.
Frequently asked questions
Do open balconies count towards SP area?
No, standard SIA 416 classifies balconies as external area SE. They do not increase usable floor area SU, avoiding finishing costs in the region of 350 CHF/m².
Where should service shafts be classified under standard SIA 416?
Main risers belong to installation area SI under standard SIA 416. Their load-bearing walls remain included in construction area SC, estimated at 450 CHF/m² for structural work.
Does an internal corridor count towards usable floor area SU?
No, internal circulation spaces form circulation area SD according to standard SIA 416. Only rooms dedicated to primary or secondary functions constitute the usable floor area SU of a storey.
Does a private cellar count towards net area SN?
Yes, a private cellar represents secondary usable floor area under standard SIA 416. It forms part of the net area SN, although its indicative rental value remains around 120 CHF/m².
What risk does an area calculation error pose for a permit?
Under art. 22 LAT, compliance is a prerequisite for a building permit. Confusing net area with gross area distorts municipal calculations and exposes the applicant to a formal refusal of the planning application.
Why separate construction area SC from quantity take-offs?
Standard SIA 416 separates construction area SC to measure the actual thickness of built elements. This secures masonry costs and prevents disputes under the work contract.
Additional resources for your area calculations:
- Calculating SIA 416 Areas, Building Volumes and Cantonal Plot Ratios (IBUS, IUS, IOS) in Switzerland
- Calculating the IBUS (Gross Floor Area Ratio - AIHC) Step by Step: Basements, Attics, and Balconies
- Determinant Floor Area (SPd) vs Energy Reference Area (SRE SIA 380/1): Stop the Confusion
- Calculating Building Volume Under SIA 416 vs Former SIA 116 Standard: Impact on Fees and Estimates
