Skip to content
Practical guide

Calculating IBUS (Gross Utilisation Ratio - AIHC) Step by Step: Basements, Attics, and Balconies

Calculate IBUS under the AIHC for basements, attics, and balconies in Vaud, Fribourg, and Neuchâtel. Plan dimensioning rules and planning permit compliance.

Table of contents
The 3 Major Site Risks
  1. Financial / Margin: Determinant area allocation error reducing project profitability by roughly 5 to 12 %, or plan adaptation costs of 4000 CHF to 12000 CHF during planning review.
  2. Legal / Joint Body / SUVA: Non-compliance with the rules of the Intercantonal Agreement on the Harmonisation of Building Terminology (AIHC), risking refusal of the building permit pursuant to art. 22 LAT.
  3. Administrative / Acceptance: Public inquiry blocked or occupancy permit refused by the commune due to exceeding the gross utilisation ratio.

This technical guide is aimed at architects, architectural draftspersons, and civil engineers tasked with preparing land-use plans and planning submission files. Under the Intercantonal Agreement on the Harmonisation of Building Terminology (AIHC), the geometric qualification of each level dictates project compliance. Distinguishing between determinant floor area and deductible areas requires rigorous scrutiny.

Integrating basements, attics, and balconies follows strict criteria across the cantons of Vaud, Fribourg, and Neuchâtel. Misjudging how far a floor emerges above ground or under-roof clearance exposes you to exceeding the index. We detail the calculation steps to dimension your architectural drawings with precision.

Methodology for allocating the determinant floor area (SPd)

Calculating the Gross Utilisation Ratio (IBUS) is based on the ratio between the determinant floor area (SPd) and the determinant land area (STd). To prepare a submission file compliant with the Intercantonal Agreement on the Harmonisation of Building Terminology (AIHC), draftspersons and architects must break down each level according to its finished level and ground contact.

Basement qualification and emergence levels

Qualifying a basement depends on its level relative to the natural or modified ground. Under the AIHC, a level is not classified as a full storey if its rough floor does not exceed the reference height above average ground level. Once an excavated façade features continuous openings exceeding the thresholds set by municipal zoning regulations, the surface becomes chargeable to SPd. In the cantons of Vaud, Fribourg, and Neuchâtel, technical plant rooms, non-habitable cellars, and storage rooms are excluded from the calculation, provided they are not converted into workspaces or living quarters.

Attics, rooftop extensions, and under-roof clearance

Attics represent a volume under the roof where determinant area depends on clear interior headroom. Pursuant to harmonised AIHC directives, SPd in attics is measured inside the exterior walls, deducting areas where the ceiling height remains below the cantonal minimum clearance. A façade parapet built too high geometrically turns the attic into a full storey, automatically increasing the IBUS.

Balconies, loggias, and outdoor extensions

Unenclosed balconies open to the exterior and lacking thermal insulation are not counted towards SPd. Conversely, loggias fitted with glass enclosures or tempered systems are reclassified as enclosed areas. The municipal authority then requires their full inclusion before granting a building permit under art. 22 LAT.

Surface area allocation table according to AIHC criteria

Type of architectural spaceAIHC statusInclusion in SPd (IBUS)Cantonal application (VD, FR, NE)
Technical basement or underground cellarNon-habitable secondary spaceDeductible (not counted)Standard exclusion if level sits below finished ground
Habitable or emerging basementFull storey or partial habitable levelChargeable to SPdMandatory inclusion once the emergence threshold is crossed
Converted habitable atticMansard volume under roofChargeable based on clear headroomUsable floor area measured from the defined minimum height
Open cantilevered balconyUnenclosed outdoor spaceDeductible (outside SPd)Not counted, provided no glazed enclosure is added
Enclosed loggia or tempered sunroomEnclosed extension of the dwellingChargeable to SPdTreated as gross floor area of the residential unit

Recurring dimensioning errors and financial impacts

Forgetting to factor in the thickness of finished walls and perimeter insulation when transitioning from permit drawings to working drawings creates harmful dimensional discrepancies. Likewise, inaccurate height profile modelling when applying the coordination principles of art. 25a LAT can invalidate the public inquiry. Adjusting plans for compliance and producing supplementary engineering reports typically costs the applicant an extra 4500 CHF to 12000 CHF.

Illustrative practical cases (typical scenarios on Swiss construction sites)

The figures and scenarios detailed below are illustrative examples formulated for technical analysis and do not represent actual construction sites.

Standard Scenario 1: Multi-family building on sloping terrain (Vaud)

In a Vaud residential district, an eight-apartment complex featured a basement housing six cellars and a shared meeting room. The sloping topography left the south face of the basement entirely exposed. The relevant authority designated this section as a habitable storey, adding 75 m² to the SPd. To avoid exceeding the maximum coefficient defined in the municipal land-use plan, designers reclassified the room as an unheated technical room prior to formal submission under art. 22 LAT.

Standard Scenario 2: Attic conversion under timber framing (Fribourg)

In a Fribourg municipality, the renovation of a farmhouse included converting the attic under traditional roof trusses. The surveyor initially tallied the entire ground-footprint area. Applying the strict AIHC headroom clearance template allowed deducting 38 m² situated beneath roof slopes, regularising the gross building index without requiring an amendment to the municipal zoning plan.

Standard Scenario 3: Reclassification of enclosed loggias (Neuchâtel)

During a rehabilitation project in Neuchâtel, adding glazing systems to existing balconies transformed these structures into tempered loggias. This reclassification produced a 90 m² increase in SPd, triggering a 3,5 % index overshoot. The plans had to be adapted by partially removing the glazing to keep the building within authorised building envelopes.

Surfaces, standards and permits: free tools

SIA 416 floor areas and volumes, cantonal zoning ratios, U-values and dew points, acoustics, planning enquiry requirements.

View engineering tools

Frequently asked questions

How do you measure basement emergence under the AIHC?

The Intercantonal Agreement on Building Terminology evaluates the finished floor relative to natural ground. An incorrect level triggers corrections of around 3'500 CHF.

Do unconverted attics count toward IBUS in Vaud?

Under standard SIA 416 and communal regulations, only usable areas with sufficient headroom count. Proactive recalibration protects a margin of roughly 2'200 CHF.

Does enclosing a balcony impact the building permit?

Pursuant to art. 22 LAT, enclosing a balcony creates determinant floor area subject to a permit. Subsequent regularisation incurs administrative fees of around 4'800 CHF.

How are stair openings deducted under the AIHC?

Under standard SIA 416, every upper floor stair opening is deducted from determinant area. Correcting this geometry prevents file revisions estimated at 1'900 CHF.

Does Fribourg use gross wall thickness for IBUS?

The Intercantonal Agreement on Building Terminology includes finished walls in IBUS. Inaccurate modelling generates supplementary inquiry costs of around 2'800 CHF.

Are basement technical rooms excluded in Neuchâtel?

Pursuant to standard SIA 416, underground technical rooms do not form part of the AIHC tally. Misclassification in the preliminary inquiry leads to appeals costing around 5'500 CHF.

To refine your surface area calculations and safeguard your permit application plans, consult our regulatory guides:

Art Construction is an independent company: it is not affiliated with the SIA, CRB, SUVA, or KBOB. Referenced norms and standards point to publications from these bodies; only official versions are legally binding.