Table of contents
The 3 Major Site Risks
- Financial / Margin: Completely redoing defective coats or chalking paint finishes generates illustrative additional costs of around 15% to 30% of the CFC 271 package amount, attributable to the contractor under art. 364 CO or art. 368 CO when spraying or sanding equipment is unsuitable.
- Legal / Joint Body / SUVA: Failure to comply with occupational disease prevention measures and technical rules regarding mineral dust exposes the employer to formal notices from enforcement bodies under art. 82 LAA, as well as to the requirements of art. 33 OTConst regarding air filtration and ventilation.
- Administrative / Acceptance: Discovering roughness or uneven appearance under grazing light compromises the inspection of the work and delays acceptance of the work within the meaning of standard SIA 118, blocking final payment and the release of contractual guarantees.
This technical guide is aimed at site managers, qualified plasterers/painters and estimators tasked with selecting powered equipment for CFC 271 and 285 work packages. Working with plasterboards, skim coats and mechanised paint application requires strict alignment between the suction power of industrial vacuum units and the kinematics of drywall sander heads. The employer must take all measures demonstrated by experience to protect workers' health in accordance with art. 82 LAA, while ensuring execution paces that align with the provisions of the contract for work governed by art. 363 CO.
Combining long-reach drywall sanders with high-pressure airless spray units meets modern productivity demands in French-speaking Switzerland, provided they are sized rigorously. Indoor ambient air must meet strict hygiene criteria: art. 33 OTConst requires hazardous substances to be extracted, filtered or diluted through mechanical ventilation to maintain healthy air. This document details vacuum pressure parameters, hydraulic delivery rates and maintenance protocols ensuring compliance with SUVA regulations and art. 3 OPA.
Technical selection criteria for drywall sanders and airless units
Selecting machinery for packages CFC 271 and CFC 285 is based on balancing surface output, operator ergonomics and occupational risk prevention. Art. 364 CO reminds us that the contractor performs the work under personal supervision and procures the necessary resources, machinery and tools at their own expense. The employer must also comply with art. 82 LAA, which requires taking all prevention measures adapted to the given conditions and permitted by the state of the art, with workers required to assist the employer, notably by using personal protective equipment.
Kinematics of telescopic sanders: rotary vs random orbital motion
Treating plasters and plasterboard requires a clear distinction based on the required finish level:
- Direct rotary motion: Recommended for rapid rough sanding, removing excess fresh plaster, and levelling taped joints. This principle offers a high material removal rate but can leave spiral micro-scratches if an unsuitable abrasive grit is used.
- Random orbital motion: Combines orbital rotation and axial oscillation. This system substantially reduces heat marks on fine smoothing coats and prevents surface defects visible under grazing light upon acceptance of the work under standard SIA 118.
- Electronic speed control: Essential for adapting linear speed to the hardness of lightweight plasters or polymer fillers to prevent thermal clogging of the abrasive disc.
Dust capture and dust extractor compliance
Dry sanding of mineral coatings generates airborne fine dust. Under art. 33 OTConst, ambient air at workstations must contain between 19% and 21% oxygen by volume, limit values for hazardous substances must not be exceeded, and these substances must be discharged into the open air, filtered, or diluted by mechanical ventilation. In addition, air quality must be checked regularly, and respiratory protective equipment must be used if technical measures prove insufficient. Art. 18 OLT 3 also governs the prevention of air pollution at the workstation.
The sander-vacuum assembly must form a sealed, closed loop. Direct connection to the perforated housing of the sanding head ensures immediate suction of particles right at the point of friction. The mobile dust extractor must feature automatic main filter cleaning to maintain constant airflow without drops in suction during continuous sanding of large ceiling areas.
Managing hand-arm vibration
Prolonged use of long-reach sanders subjects the operator's upper limbs to continuous mechanical stress. Art. 22 OLT 3 provides that noise and vibrations must be avoided or mitigated through technical measures, work organisation or isolating the sources. Equipment must feature decoupled handles with elastomeric dampers and balanced weight distribution to reduce muscle fatigue.
Airless spraying technology: hydraulic piston vs electric diaphragm
Mechanised application of bonding primers, dispersion paints and flat lacquers depends on the pump unit selected:
- Hydraulically driven piston pumps: Engineered for high-viscosity products, sprayable surfacing plasters and filled paints. The long piston stroke delivers steady pressure without residual pulsation in the hose.
- Electric diaphragm pumps: Ideal for low-viscosity materials, wood stains and standard architectural dispersions. The small dead volume facilitates flushing and reduces solvent or cleaning water consumption.
- Low-pressure spray tips: Modern tips deliver consistent atomisation at reduced pressures, cutting overspray indoors and improving the effective transfer rate onto the substrate.
Engineering comparison table: CFC 271 and CFC 285 tooling
| Equipment / Configuration | Standard or requirement | Recommended job site use | Critical inspection point |
|---|---|---|---|
| Drywall sander with disengageable orbital head | Standard SIA 118 (surface tolerances) | High-grade finish surfacing on drywall and mineral coatings | Absence of swirl marks under oblique grazing light |
| Site dust extractor with continuous filter cleaning | Art. 33 OTConst (air filtration) | Suction synchronous with the sanding head on plaster coats | Filter permeability and tight seal at hose coupling |
| High-capacity piston airless pump | Art. 364 CO (due care and appropriate tooling) | High-volume interior dispersion and sprayable plasters | Calibrated tip wear and inlet valve seat alignment |
| Diaphragm airless unit with fine regulator | Art. 3 OPA (technical work rules) | Satin lacquers, fine primers, interior joinery | Verification of steady pressure gauge readings without surging |
| Power equipment with vibration-damped handle | Art. 22 OLT 3 (vibration mitigation) | Repetitive sanding of ceilings and large vertical walls | Wear condition of head silent blocks and joint play |
Common procurement mistakes and resulting costs in finishing work
Inaccurate technical assessment of equipment leads to immediate site failures, severely impacting company profitability:
- Using a vacuum without active filter cleaning: Instant clogging by plaster dust chokes airflow within minutes. The work atmosphere becomes saturated with particulates, violating art. 33 OTConst. Unproductive cleaning time and premature filter replacements lead to induced costs of around 450 to 750 CHF per day per crew.
- Unsuitable airless spray tip: A worn or oversized tip applies an uncontrolled excess of paint. This creates local build-ups, runs, and a 20% to 35% paint overconsumption—amounting to a direct product loss that can exceed 1 200 CHF on a standard office floor.
- Undersized pump power: Attempting to spray lightweight plaster with an airless unit designed only for thin dispersion paints leads to ball valve seizure. A complete shutdown of the finishing line and specialist workshop repairs generate overhaul costs of roughly 900 to 1 800 CHF excluding VAT, not counting delay penalties.
- Neglecting weight balance on telescopic sanders: A top-heavy tool without balance assist increases physical strain and accident risks under art. 82 LAA, reducing the operator's daily output by nearly 30%.
Illustrative practical cases (typical scenarios on Swiss construction sites)
The figures presented in the scenarios below are illustrative examples intended to guide technical and logistical planning for finishing firms.
Typical scenario 1: Refurbishment of administrative premises in the canton of Geneva
The project involves renovating partitions and ceilings in an office building with 1 800 m² of interior walls (CFC 271 and CFC 285). The crew consists of 3 skilled plasterers/painters deployed over 10 working days.
- Specific constraint: Construction site in a dense urban setting with office activities partially continuing on adjacent floors. No mineral dust emissions are tolerated outside the enclosed area, in line with art. 33 OTConst.
- Selected technical approach: Deployment of two telescopic random orbital sanders connected to industrial automatic-clean dust extractors equipped with high-efficiency primary filters. Application of the primer coat using a compact diaphragm airless sprayer fitted with low-pressure tips to minimise overspray.
- Engineering rationale: Integrated closed-loop extraction prevents microparticles from spreading into ventilation ducts. Operating at moderate pressure delivers an even film meeting final finish requirements without affecting surrounding walls. Work is planned from the initial site preparation stage following the principles of art. 3 OTConst.
Typical scenario 2: Multi-family housing construction in the canton of Vaud
The scheme covers 24 new homes requiring spray application of a skim coat on concrete slabs and flat dispersion paint over 6 500 m² of wall surfaces. The crew consists of 4 qualified applicators.
- Specific constraint: Strict adherence to the handover schedule before timber parquet and resilient flooring are laid. Art. 366 CO allows the client to take action if delays jeopardise on-time completion.
- Selected technical approach: Use of a heavy-duty hydraulic piston airless pump capable of feeding two spray guns simultaneously through 45-metre hose runs from the central plant room. Final sanding carried out using lightweight sanders equipped with multi-directional swivelling heads.
- Engineering rationale: Continuous feeding from the ground floor eliminates handling product drums in stairwells. The high flow rate ensures a consistent wet film thickness without visible lap marks. The employer applies art. 5 OTConst by appointing a competent person to oversee connections and the wearing of hearing and respiratory personal protective equipment pursuant to art. 36 OTConst and art. 27 OLT 3.
Free construction site calculators
Thirty-five trade calculators: site installations, waste, concrete, screeds, insulation, scaffolding. No sign-up required.
Frequently asked questions
How can surface sanding and indoor air quality be reconciled under the OTConst?
The employer applies art. 33 OTConst to maintain oxygen levels and ensure limit values are not exceeded. Mineral dust is filtered or extracted through mechanical ventilation. Respiratory protective filtering devices supplement these technical measures whenever capture at the sanding head remains insufficient during preparatory phases.
What obligations arise when old coatings containing asbestos are uncovered?
Pursuant to art. 32 OTConst, if such a substance is discovered unexpectedly, work must stop immediately and the client or its representative must be notified. If the work releases substantial airborne fibres, it must be carried out exclusively by asbestos removal firms recognised by the CNA under art. 82 OTConst.
What is the contractor's liability regarding the supply of its spraying equipment?
Under art. 364 CO, the contractor procures at its own expense the means, machinery and tools required to execute its contract. Investing in a pressure spraying station, around 4 200 CHF by way of illustration, falls under its direct operating costs in order to deliver compliant work.
How should worker protection be organised against noise emissions from high-pressure pumps?
Pursuant to art. 36 OTConst, when the noise exposure level cannot be reduced below the threshold value through technical or organisational measures, wearing appropriate hearing protection is mandatory. Positioning the pump further away using long flexible hoses also helps reduce applicator exposure.
What measures should be taken regarding hand-arm vibrations from drywall sanders?
Art. 22 OLT 3 provides that noise and vibrations must be avoided or mitigated through plant measures, source insulation or work organisation. In addition, art. 82 LAA requires applying all prevention measures proven necessary by experience.
Who must appoint the person in charge of safety checks at the application workstation?
Art. 5 OTConst requires the employer to appoint on each construction site a competent person responsible for occupational safety and health protection, authorised to issue instructions to workers. This person removes anyone whose condition or behaviour poses a danger to others.
Operational summary for finishing work
Rigorous sizing of surfacing and spraying tools ensures consistent finishes while protecting the health of personnel on Swiss construction sites. Integrating high-performance extraction systems and controlling pressures cut ambient dust and prevent bodily injury. Site managers and construction site supervisors tailor their technical choices to the requirements of each trade.
To explore equipment selection in greater depth in line with technical and normative standards, browse our specialised guides:
- Professional Power Tools by CFC Chapter: Engineering Selection and SUVA Vibration Values
- Hand-Arm Vibration Exposure Calculator A(8): Maximum Permitted Time Under SUVA Thresholds (2.5 and 5.0 m/s²)
- CFC 211 Equipment (Masonry & Reinforced Concrete): High-Frequency Poker Vibrators, SDS-Max AVR Breakers and Wet Cutters
- CFC 214 Equipment (Carpentry & Timber Framing): Deep-Cut Saws, Guide Rails and Cordless Nailers
- CFC 221 / 224 Equipment (Facades & Waterproofing): Hot-Air Welders for TPO/PVC Membranes and Dustless Wall Chasers