Skip to content
Art ConstructionTenders
Practical guide

AIMP and LMP Thresholds: Open, Selective, or Invitation Procedure, Which One Applies to Your Contract?

Discover Swiss AIMP and LMP public procurement thresholds. Open, selective, or invitation procedure: practical guide for building contractors.

Table of contents
The 3 Major Site Risks
  1. Financial / Margin: Investing considerable resources (in the range of 5000 to 15 000 CHF) to prepare a tender dossier in an open procedure (art. 18 LMP) without having verified the qualification criteria, leading to early disqualification and a total loss for the tendering firm.
  2. Legal / Joint / SUVA: Facing exclusion from the procedure and revocation of the award (art. 44 LMP) in case of non-compliance with provisions regarding worker protection, working conditions, or LTN reporting requirements (art. 12 LMP).
  3. Administrative / Acceptance: Missing the strict 20-day appeal deadline running from notification of the decision (art. 56 LMP) due to misunderstanding the specific legal remedies applicable to the invitation procedure (art. 20 LMP) or selective procedure (art. 19 LMP).

Participating in public procurement in Switzerland requires strict mastery of award rules. The legal framework rests on the Federal Act on Public Procurement (LMP) and the Intercantonal Agreement on Public Procurement (AIMP). The cornerstone of this system lies in threshold values, which strictly determine the applicable procedure type. Depending on the estimated contract value, the contracting authority chooses an open, selective, invitation, or direct award procedure. For estimators and bid managers, identifying the correct procedure makes it possible to target relevant calls for tenders and allocate company resources efficiently.

The open procedure (art. 18 LMP) allows any tenderer to submit a bid following a public call for tenders, requiring a complete file from the outset. The selective procedure (art. 19 LMP) takes place in two stages: the contracting authority first selects candidates authorised to submit a tender based on their aptitude. As for the invitation procedure (art. 20 LMP), it exempts the contracting authority from official publication, with the latter directly inviting the companies of its choice. Navigating this regulatory maze, while taking into account the de minimis rule (art. 16 LMP) for construction work on the same structure, requires in-depth knowledge of cantonal AIMP practices.

Determining the Procedure Based on Threshold Values (LMP and AIMP)

The choice of award procedure is never left to the discretion of the contracting authority. It is strictly dictated by the estimated contract value and the threshold values set by current legislation. Article 17 LMP clearly defines that the procedure is selected based on the contract value and threshold values. Contracting authorities subject to the Federal Act on Public Procurement (LMP) or the Intercantonal Agreement on Public Procurement (AIMP) must systematically evaluate the total cost of the work before publishing the call for tenders.

For large construction projects, the legislation provides flexibility mechanisms. The de minimis clause, governed by art. 16 LMP, offers strategic flexibility. For multiple construction works required for the same structure, this clause allows works worth less than 2 million francs each, and whose cumulative value does not exceed 20 % of the total value of the structure, to be subject to rules for contracts not covered by international agreements. This provision allows public clients to split specific lots and award them through streamlined procedures, thereby promoting direct access for local SMEs to public procurement without facing international competition.

Detailed Analysis of Award Procedures

The Open Procedure

Pursuant to art. 18 LMP, in an open procedure, the contracting authority issues a public call for tenders and any tenderer may submit a bid. This method guarantees maximum transparency and competition. For the construction company, this means open access to tender documents and itemised quotes. However, competition is fierce. Firms must invest significant resources to price the services accurately without any guarantee of success. The contracting authority then assesses bids based on performance-related criteria as defined in art. 29 LMP, notably including price, quality, deadlines, technical value, and sustainable development.

The Selective Procedure

The selective procedure, governed by art. 19 LMP, takes place in two distinct stages. The contracting authority publishes a public call for tenders with an initial request to participate. Companies submit an application file demonstrating their aptitude (references, financial capacities, compliance with collective labour agreements). The contracting authority then selects the tenderers authorised to submit a full tender and, where possible, authorises at least three. For building contractors, this procedure substantially limits estimating costs: only pre-qualified firms will need to invest calculation hours in detailed pricing for the contract.

The Invitation Procedure

Art. 20 LMP governs the invitation procedure. It applies to contracts not covered by international agreements that meet specific cantonal or federal threshold values. The contracting authority invites tenderers of its choice directly to submit a bid, without any public call for tenders. The law requires the contracting authority to request at least three bids where possible. This procedure is highly favoured for medium-sized contracts because it reduces administrative burden for the contracting authority and gives invited companies a mathematical success probability of at least 33 %.

The Direct Award Procedure

The direct award procedure (art. 21 LMP) allows the contracting authority to award the contract directly to a tenderer without a call for tenders. This exception applies regardless of threshold values when one of the strict conditions is met, for instance when no acceptable bid was submitted following an open procedure, in cases of extreme urgency due to unforeseeable events, or if only one tenderer can be considered for specific technical reasons. The contracting authority must establish rigorous documentation for each directly awarded contract to justify this exceptional choice.

Comparison Table of Swiss Public Procurement Procedures

Procedure Type Main Legal Basis Accessibility for the Contractor Estimating Cost for the Tenderer Typical Construction Site Use Case
Open Procedure art. 18 LMP Public, open to all tenderers Very high (full pricing required) Major infrastructure projects exceeding international thresholds
Selective Procedure art. 19 LMP Restricted after a pre-qualification phase Moderate (aptitude file, then pricing if shortlisted) Complex structures requiring specialised technical skills
Invitation Procedure art. 20 LMP By direct invitation (minimum 3 bids where possible) High but offset by limited competition Medium-sized renovations or specific lots below international thresholds
Direct Award Procedure art. 21 LMP Direct award to a single firm Low (direct negotiation) Emergency work or exclusive technical expertise
Application of the De Minimis Clause art. 16 LMP Depends on the procedure chosen for the detached lot Variable depending on the lot Detaching a finishing work lot from a large overall project

Frequent Bidder Errors and Financial Consequences

Bidding on a public procurement contract requires absolute administrative and technical discipline. A simple misjudgment can lead to exclusion from the procedure and revocation of the award (art. 44 LMP), rendering the technical office's efforts worthless.

First, submitting an abnormally low tender represents a major risk of exclusion. Under art. 38 LMP, if the contracting authority receives a bid whose total price is abnormally low, it must request relevant clarification from the tenderer to ensure participation criteria are met and tender requirements were understood. If the company cannot substantiate its daywork rates or unit prices (for instance, by proving strict compliance with collective labour agreements), it risks immediate exclusion. The financial loss then corresponds to the estimating costs, often valued between 5 000 and 15 000 CHF for a structural work lot.

Second, underestimating aptitude criteria in an open procedure leads to direct losses. A company that invests resources to respond to a call for tenders without holding the required certifications will see its bid rejected on formal grounds as soon as tenders are opened.

Third, failure to comply with formal requirements (missing signatures, expired debt collection register extracts) forces the contracting authority to dismiss the bid. Art. 38 LMP specifies that the contracting authority checks compliance with formal requirements and corrects obvious calculation errors ex officio, but is not allowed to remedy the omission of a mandatory document, as this would violate the principle of equal treatment.

Illustrative practical cases (typical scenarios on Swiss construction sites)

The figures, CHF amounts, and situations presented below are illustrative examples designed to show the practical application of award procedures within Switzerland.

Scenario 1: Renovation of a municipal school (Canton of Vaud)

A Vaud municipality plans the energy retrofitting of its secondary school roof. The estimated budget for the specific lot "Carpentry and roofing" amounts to 180 000 CHF. This amount falls below the cantonal threshold requiring an open procedure for building work contracts. The municipality therefore selects an invitation procedure (art. 20 LMP). It selects four local carpentry firms recognized for their compliance with working conditions. For the bidding firm, the estimating effort is justified because competition is limited to three other players. The award is based on the criteria in art. 29 LMP, including the technical value of the proposed insulation, the plausibility of the bid, and price.

Scenario 2: Construction of a cantonal sports centre (Canton of Fribourg)

The Canton of Fribourg launches the construction of a new sports complex. The "Structural work and masonry" lot is estimated at 4.5 million CHF, well exceeding the threshold values. The contracting authority opts for the selective procedure (art. 19 LMP) to avoid reviewing dozens of bulky bids. In the first phase, twenty firms submit their aptitude file. The canton shortlists five, deemed capable of managing a construction site of this scale with sufficient manpower. One of the non-selected firms attempts to appeal this choice, but art. 56 LMP provides that the appropriateness of a decision cannot be examined by the appellate body. The five selected firms then receive the full tender package and are given the set deadline to price the work competitively.

Calls for tenders: free tools

Direct public procurement tenders, AIMP thresholds by canton, converting SIA 451 to Excel, quantity takeoff from an IFC model.

View tendering tools

Frequently asked questions

How do you apply the de minimis clause for a lot on a major public project?

Art. 16 LMP allows certain works to be exempted from international agreements. If your lot is worth less than 2 million francs and the cumulative value does not exceed 20 % of the structure, the contracting authority can choose an invitation or direct award procedure.

How many bids does the contracting authority request in an invitation procedure for a municipal contract?

Under art. 20 LMP, applicable to contracts not reaching international thresholds, the contracting authority invites tenderers of its choice. It must request at least three bids where possible. This procedure targets local firms for illustrative amounts of around 150 000 CHF.

What is the difference between the open procedure and the selective procedure for our firm?

The open procedure (art. 18 LMP) allows any tenderer to submit a bid. The selective procedure (art. 19 LMP) includes pre-qualification. The contracting authority chooses candidates authorised to submit a tender based on their aptitude, selecting at least three firms where possible.

What happens if our offer is deemed abnormally low compared to competitors?

Art. 38 LMP requires the contracting authority to seek relevant clarifications. It ensures that you have understood the requirements and comply with the participation conditions, particularly the provisions on worker protection and equal pay set out in art. 12 LMP.

What is the deadline for challenging an award decision that seems unjustified to us?

Art. 56 LMP sets a deadline of 20 days from notification of the decision to file a written, reasoned appeal. Note that the appropriateness of the decision cannot be reviewed; only procedural flaws or errors of law are admissible.

In which cases can a public contract be awarded to us without competitive tendering?

Art. 21 LMP permits direct award procedures regardless of threshold values in specific situations: absence of admissible tenders, urgency due to unforeseeable events, or only one possible tenderer. The contracting authority documents this contract.

Mastering procedures for your contracts

Understanding the LMP and AIMP thresholds is essential to anticipate the applicable procedure type. Whether dealing with an open, selective, or invitation procedure, thorough preparation increases your chances of success. To optimise your tender strategies in Switzerland, consult our resources:

Art Construction is an independent company: it is not affiliated with the SIA, CRB, SUVA, or KBOB. Referenced norms and standards point to publications from these bodies; only official versions are legally binding.