Skip to content
Sign in Sign up
Categories
Power tools DrillsScrewdriversGrindersSaws Measure Laser levels Protection Protective equipment Site Ladders and stepladdersHand tools
Support
Change language: French
Practical guide

Freestanding Construction Site Barriers & Fencing: Anti-Lift Ballasting and OPB Acoustic Attenuation Tarpaulins

Swiss technical guide: freestanding mobile site fencing, anti-lift ballast sizing, and OPB- and OTConst-compliant acoustic tarpaulins.

Table of contents
The 3 Major Site Risks
  1. Financial / Margin: Fencing blown over by wind causes property damage to the public domain or third-party vehicles, amounting to roughly 15 000 CHF to 45 000 CHF borne by the contractor under art. 364 CO if inappropriate site equipment was used, in addition to emergency response costs.
  2. Legal / Joint committee / SUVA: Missing anchorages or a lack of protection against falling elements along pedestrian walkways violates art. 17 OTConst and art. 3 OPA, triggering criminal liability under art. 229 CP for endangering human life through a breach of the recognized rules of construction.
  3. Administrative / Acceptance: Non-compliance with noise emission limits set by the Noise Abatement Ordinance (OPB) or omitting the noise reduction measures required by art. 22 OLT 3 can trigger a stop-work order by the municipality and stall the planning required by art. 3 OTConst.

This technical guide is aimed at site management, civil engineers, and construction managers who need to size freestanding construction site fencing in French-speaking Switzerland. Fitting acoustic sound-reduction tarpaulins or screening mesh increases wind exposure on mobile mesh panels. Sound planning under art. 3 OTConst requires defining the ballasting system, the concrete or recycled plastic base blocks, and the support struts before setting up fencing on public or private land.

In dense urban areas, reducing noise on construction sites is a strict legal requirement governed by the Noise Abatement Ordinance (OPB) and art. 36 OTConst. Selecting heavy mobile acoustic barriers insulates excavation equipment and cutting stations, preventing complaints from neighbours and work stoppages ordered by municipal building authorities.

Technical sizing criteria for fencing and wind stability

Erecting temporary mobile fencing around site perimeters involves strict physical and safety constraints. Fitting acoustic tarpaulins or screening nets turns an open wire mesh into a solid surface subject to significant wind loads. Under art. 3 OPA, employers must implement protective measures that comply with recognized technical standards. This obligation requires analysing the horizontal forces transmitted to ground supports to prevent any overturning or displacement.

To prevent site enclosure elements from toppling onto traffic lanes, art. 17 OTConst requires measures at workplaces and pedestrian passages so that workers are not endangered by collapsing building components. The restraining system must combine sufficiently heavy base blocks and securely anchored angled struts. Where volatile chemical agents or fine dust are produced close to the site boundary, art. 18 OLT 3 addresses air pollution, while noise sources must be mitigated with attenuation systems. Furthermore, art. 22 OLT 3 states that noise and vibration must be avoided or reduced through structural measures, plant measures, insulation or isolation of sources, or work organisation.

Types of ballast bases and anchoring systems

The chosen counterweight determines the overall resistance of the fenced bay. Base blocks fall primarily into two categories:

  • Vibrated reinforced concrete bases: Unit mass of roughly 32 kg to 36 kg. They provide excellent static stability on level, compacted ground, but present a risk of cracking under repeated handling with crane grabs or forklifts.
  • High-density recycled plastic bases: Unit mass of roughly 18 kg to 26 kg. Impervious to freeze-thaw cycles, these bases absorb impacts without chipping and feature calibrated holes that prevent tubular uprights from twisting.

On soft ground, topsoil, or earthwork gravel, inserting steel ground pins through the base plates provides mechanical locking. On asphalt or concrete slabs within the municipal public domain, bolstering stability requires 45-degree telescopic struts clamped with double couplers at mid-height of the panels, ballasted at their foot with additional mass blocks.

Acoustic attenuation under the Noise Abatement Ordinance

In Swiss urban zones, construction sites generate nuisances regulated by the Noise Abatement Ordinance. Multi-layer composite acoustic blankets, combining a viscoelastic heavy mass and a rot-proof absorption layer, block direct noise paths from generators, compressors, or breakers toward neighbouring properties. Under art. 36 OTConst, if noise exposure cannot be reduced below the limit value through technical or organisational measures, suitable hearing protection must be worn by staff.

Using solid acoustic panels nevertheless results in a maximum drag coefficient. Site management must prohibit simple plastic cable ties in favour of galvanised steel clamps that securely lock adjacent tubular frames together. If anchor failure leads to an overturn endangering pedestrians on pavements or roadways, the criminal liability of the parties involved may be engaged under art. 229 CP, which penalises breaches of the recognized rules of construction in cases of intentional or negligent endangerment.

Comparison table of fencing and stabilisation systems

Barrier configuration Stability and acoustic requirements Operational use on the construction site Critical inspection point
Standard mobile wire mesh without screening Unobstructed air passage, art. 3 OPA Plot boundary demarcation and primary excavation safety Complete seating of panel spigots in base blocks, no excessive play
Solid profiled steel sheet panel Complete visual screening, art. 17 OTConst Immediate perimeter of demolition areas and sorting bays Compulsory strut every two bays with double ballast base
Heavy multi-layer acoustic tarpaulin OPB sound reduction, art. 22 OLT 3 Acoustic screens around cutting stations and compressors Overlap continuity and ground anchorage of wind bracing struts
Micro-perforated dust screen netting Controlled air permeability, art. 18 OLT 3 Debris loading zones and cantonal road boundaries Fastened with steel couplers onto reinforced uprights
Fencing with secure access pedestrian gate Access control and pedestrian passage, art. 3 OTConst Main personnel entrances and signed emergency exits Minimum ground clearance to prevent any jamming during movements

Common procurement and installation mistakes and their financial impact

Procuring fence components without calculating wind loads is a frequent cause of site incidents. Art. 364 CO sets out the obligations of the contractor, who must procure at their own expense the tools and equipment needed to execute the work with due care. Cost savings made on the initial ballast are quickly wiped out by damage costs:

  • Absence of support struts on screened fences: Using freestanding base blocks without angled bracing leads to entire bays blowing over in moderate gusts. Repair costs for third-party vehicles or municipal roads typically range from 6 000 CHF to 18 000 CHF, plus unbillable daywork hours.
  • Using undersized connecting couplers: Omitting solid steel couplers leads to fence lines working themselves loose. Repeated flapping from wind vortices tears acoustic tarpaulins prematurely, creating a direct loss of around 2 500 CHF per ten-metre run.
  • Obstructing public footpaths: Concrete base blocks protruding onto unprotected pavements violate municipal building authority permits. Official warnings require immediate remediation and the installation of bevelled pedestrian threshold ramps, adding an unforeseen cost of roughly 3 500 CHF.

Illustrative practical cases (typical scenarios on Swiss construction sites)

The financial values and figures below are illustrative examples intended to model real-world site installation.

Scenario 1: Major urban renovation with acoustic constraints (Canton of Vaud)

In central Lausanne, an interior demolition and underpinning project involves a crew of 14 workers along a busy shopping street. Municipal bylaws and the Noise Abatement Ordinance require enclosing emissions from a hydraulic power pack and the skips loading area. Site management specifies 2.00 m high freestanding metal fencing clad with heavy acoustic tarpaulins.

To counter wind loads generated by the impervious fabrics without drilling into the public roadway surface, the contractor uses rear 45-degree struts resting on 80 kg ballast blocks per support point. Art. 4 OTConst requires drawing up a prior health and safety plan detailing measures for the work being carried out. Art. 5 OTConst calls for appointing a competent safety officer authorised to issue instructions. This arrangement maintained the integrity of the acoustic barrier through autumn storms, without misalignment or interference with public footpath users.

Scenario 2: Logistics platform and windy earthworks (Canton of Fribourg)

On an open plot in Bulle exposed to strong westerly winds, a team of 8 machine operators and groundworkers carries out deep excavations. Art. 68 OTConst requires excavations to be designed so that falling or sliding material does not endanger any worker. The excavation perimeter is enclosed by 180 metres of mobile mesh fence fitted with screening nets to conceal material storage areas.

To prevent overturning into the cut, the civil engineer had the fence line erected over 1.50 m back from the crest of the slope, using 24 kg recycled plastic bases coupled with steel ground pins driven into the native soil. During loading operations near moving plant, art. 7 OTConst requires wearing high-visibility warning clothing featuring fluorescent fabric and retroreflective stripes. The whole setup prevented any instability of the construction site perimeter during topsoil stripping.

Free construction site calculators

Thirty-five trade calculators: site installations, waste, concrete, screeds, insulation, scaffolding. No sign-up required.

View trade calculators

Frequently asked questions

Who is responsible for checking mobile fencing stability against wind gusts?

The designated competent person under art. 5 OTConst checks that fences are secure. Under art. 17 OTConst, measures must prevent materials from falling onto walkways. Reinforced bracing costs roughly 45 CHF per element as an indicative figure.

How do you balance solid screening tarpaulins with the risk of toppling?

The sail effect drastically increases wind loading. Art. 3 OTConst requires planning measures to minimise accident risks. Adding triangulated struts and heavy concrete base blocks is essential, representing an indicative budget of 120 CHF per corner post.

Which acoustic requirements govern site noise screens under the OPB?

Art. 22 OLT 3 requires noise to be prevented or mitigated through structural design, plant measures, or site organisation. The Noise Abatement Ordinance sets the framework for site management. A mobile acoustic tarpaulin costs roughly 180 CHF per panel.

Must the employer document the fencing setup before work begins?

Yes, art. 4 OTConst requires a written health and safety plan detailing the measures for the construction site. The installation of self-supporting fences and their ballasting are recorded in it. The necessary supplies are the contractor's responsibility in accordance with art. 364 CO, without unforeseen flat-rate surcharges.

What is the criminal liability if an improperly ballasted fence falls?

In the event of an intentional failure to follow recognised building practice knowingly endangering life or physical integrity, art. 229 CP provides for a custodial sentence of up to five years or a monetary penalty. Negligence is punishable by up to three years or a monetary penalty.

How does the contractor report unstable ground compromising fence anchoring?

Under art. 365 CO, the contractor must immediately notify the client if the ground provided has defects that jeopardise proper execution. This written notice protects their rights, avoiding the additional costs of underpinning that could reach an illustrative amount of 950 CHF to secure the base.

Perimeter security using stable self-supporting fencing and suitable acoustic barriers guarantees regulatory compliance on the construction site while protecting third parties and workers alike. Discover our specialised equipment and technical guides for your installations:

Art Construction is an independent company: it is not affiliated with the SIA, CRB, SUVA, or KBOB. Referenced norms and standards point to publications from these bodies; only official versions are legally binding.