Table of contents
The 3 Major Site Risks
- Financial / Margin: Accidental hydrocarbon contamination of the subsoil generates emergency remediation, contaminated soil haulage to specialized OLED channels and groundwater pumping costs ranging from 40'000 CHF to over 150'000 CHF, with no contract coverage possible under art. 364 CO, which requires the contractor to provide the necessary resources at its own expense.
- Legal / Joint Body / SUVA: Non-compliant storage of liquid chemicals exposes operations to interventions by cantonal environmental authorities under the LEaux, as well as orders under art. 5 OTConst para. 1, which requires the appointment of a competent person responsible for safety empowered to issue instructions to workers to halt hazardous behaviour.
- Administrative / Acceptance: Evidence of uncontrolled spills of formwork oil or fuels compromises the issuance of municipal environmental clearances and triggers notices of defects pursuant to art. 366 CO para. 2, delaying formal acceptance under standard SIA 118 and freezing the release of contractual financial guarantees.
This technical and regulatory guide is intended for site managers, site supervisors and structural work contractors working on Swiss civil engineering and building construction sites. Storing diesel fuels, petrol for power tools, hydraulic oils and formwork release agents requires watertight static or mobile retention systems. Applying federal water protection regulations together with recommendation SIA 430 requires sizing bunds to hold the full capacity of the largest stored tank or a significant fraction of the total volume, preventing any accidental spill into surface-water drainage networks or groundwater.
Operational environmental management entails systematically deploying emergency absorbent kits right next to refuelling areas, generators and compressors. From the preparatory phase required by art. 3 OTConst para. 1, the contractor assesses environmental risks to plan suitable protective measures. This guide details compatibility criteria between galvanized steel or high-density polyethylene bunds, the sorting of soiled absorbents into OLED channels and daily installation checks.
Technical selection criteria for spill bunds and response kits
Selecting a containment unit or a mobile absorption set depends on the nature of the chemicals stored, total cumulative volumes and spatial layout constraints specific to each construction site installation. Requirements of the Federal Act on the Protection of Waters and recommendation SIA 430 require total watertightness against polluting liquids to safeguard groundwater, watercourses and storm drainage networks.
Sump materials: high-density polyethylene or galvanized steel
Physicochemical compatibility determines the structural material of the spill bund:
- Galvanized or painted steel: Essential for flammable liquids, diesel fuels, special petrols and technical solvents. It offers high mechanical resistance to plant impacts and does not build up critical electrostatic charges. It is preferred for metal drums under cover or inside locked containers.
- High-density polyethylene (HDPE): Recommended for formwork release agents, concrete admixtures, corrosive products, acids and pickling bases. Its comprehensive chemical resistance prevents corrosion degradation, yet it remains vulnerable to open flames and highly volatile solvents.
Containment capacity and rainwater management
Outdoors, rainwater reduces the usable capacity of an open bund. To prevent hydrocarbon overflows from floating, the contractor uses models with integrated roofs, lockable roller shutters or watertight covers. When used in the open, strict water level monitoring is required, combined with disposal compliant with OLED special waste treatment channels.
Emergency spill kits: composition and absorbent granularity
Emergency bags and cabinets must be stationed in the immediate vicinity of plant refuelling and formwork spraying areas. An operational kit includes:
- Containment booms to encircle the spill footprint before it spreads to rainwater grates.
- Hydrophobic absorbent sheets and rolls, selectively absorbing hydrocarbons while repelling water.
- Fire-retardant mineral or plant-based granules for stabilized subgrades and traffic surfaces.
- Watertight retrieval bags for OLED special waste with tie closures.
- Personal protective equipment including nitrile gloves and splash goggles, in compliance with art. 82 LAA where the employer implements the necessary measures and workers wear personal protective equipment.
Comparative table of containment and absorption solutions
Equipment sizing addresses on-site mechanical and environmental stresses:
| Type of equipment | Requirement or recommendation | On-site application | Inspection point |
|---|---|---|---|
| Galvanized steel bund with grating | Recommendation SIA 430 and LEaux | Storage of 200 L drums of diesel and engine oils | Corrosion, weld integrity, rainwater accumulation |
| Low-profile modular HDPE platform | Recommendation SIA 430 and LEaux | Formwork oil decanting and spraying area | Plastic cracking, ground shimming, levelness |
| Secure enclosed containment container | Recommendation SIA 430 and LEaux | Main outdoor fuel and solvent storage area | Natural ventilation, lock system, roof watertightness |
| Flexible folding containment berm | Recommendation SIA 430 and LEaux | Plant servicing, compressor placement | Punctures from gravel, corner bracket rigidity |
| Mobile cabinet spill kit | Recommendation SIA 430 and OLED | Fixed refuelling station and plant workshop | Absorbent expiry date, available watertight OLED bag |
| Portable in-cab emergency kit | Recommendation SIA 430 and OLED | Carried on excavators, dumpers and cranes | Intact tamper seal, protective gloves present |
Frequent procurement mistakes and operational extra costs
Misjudging normative requirements causes recurring operational failures:
Outdoor storage without shelter or drain valve
Leaving a standard containment bund uncovered causes it to fill gradually with rain. Accumulated water causes lighter containers to float and cuts available sump capacity. If oil leaks, the mixture overflows straight onto bare ground. Pumping water-hydrocarbon mixtures and clean-up by a specialized vac-truck contractor represent an unexpected expense of roughly 2'500 CHF to 6'000 CHF per callout.
Binder incompatibility in wet environments
Using standard sawdust or untreated universal absorbent granules on wet surfaces leads to water saturation rather than hydrocarbon uptake. The pollutant continues migrating toward excavations. Using certified oil-only hydrophobic absorbents avoids downstream remediation of road subbase gravels, whose disposal at a controlled landfill costs roughly 4'000 CHF to 12'000 CHF.
Lack of organizational and documentary anchoring
Art. 4 OTConst stipulates that before starting work, the employer ensures that a plan details the necessary measures for the work performed on the construction site, including first aid organization, drawn up in writing or in a form that allows text-based verification. Failing to record safety data sheets and spill kit locations delays staff response times in the event of a hose burst. Furthermore, art. 5 OTConst specifies that the employer appoints on every construction site a competent person responsible for occupational safety and health protection, capable of issuing instructions to workers, while dismissing anyone who through their behaviour or state endangers themselves or others. Without clearly appointing this officer, environmental risk management remains ineffective.
Illustrative practical cases (typical scenarios on Swiss construction sites)
The following financial and operational figures are illustrative examples intended to guide site preparation.
Typical scenario 1: Civil engineering site in a groundwater protection zone (Canton of Vaud)
On a road earthworks site deploying 18 people along an agricultural valley, equipment includes two 25-tonne excavators, a roller compactor and a standalone power generator. The sandy-gravelly soil exhibits very high permeability.
To comply with the Federal Act on the Protection of Waters and recommendation SIA 430, the contractor applies the following measures:
- Setting up a stabilized refuelling pad over heavy geotextile with steel bunds under a locked shelter to store four 200 L drums of diesel and two drums of hydraulic oil.
- Installing two demountable flexible containment berms positioned beneath stationary engines and generators.
- Deploying a 240 L mobile emergency cabinet containing floating booms, absorbent socks and oil-only pads.
- Equipping each heavy machinery cab with a 30 L rapid response carry bag with nitrile gloves.
Total capital outlay for these measures is around 4'800 CHF excluding VAT (8,1 %). This expenditure shields the business against shallow aquifer contamination, where pumping and contaminated soil remediation works would exceed 80'000 CHF charged to the contractor pursuant to art. 364 CO, which requires providing the resources needed to execute the work.
Typical scenario 2: Construction of an office building (Canton of Geneva)
A total contractor executes the structural work for a building in a dense urban setting with 25 workers. Intensive formwork usage requires daily spraying of several hundred litres of synthetic release agent.
The arrangement approved by site management includes:
- Two 1'000 L HDPE spill stations equipped with plastic grates to house the formwork oil intermediate bulk containers under a welfare shelter overhang.
- A spray station with a drip tray routed into the containment basin to catch residual drips along backpack sprayer tanks.
- A stock of granular absorbent dedicated to smooth floors to treat slippery zones near pedestrian accessways.
The allocated budget is around 3'200 CHF excluding VAT (8,1 %). It protects the structure from seepage into perimeter backfills and removes slip and trip hazards along structural work circulation routes.
Free construction site calculators
Thirty-five trade calculators: site installations, waste, concrete, screeds, insulation, scaffolding. No sign-up required.
Frequently asked questions
What is the minimum sump capacity for drums of formwork release oil?
The capacity must hold 100% of the largest stored container or a fraction of the total volume per cantonal water regulations. For four 200-litre drums, budget for a watertight steel bund of at least 220 litres, representing an illustrative outlay of around 450 CHF excluding VAT.
What environmental planning duties fall to the contractor during site set-up?
The contractor prepares the refuelling area right upon contract award. Under art. 3 OTConst, work is planned to minimize health hazards and site-specific measures are set out in the works contract. A watertight steel bund prevents accidental contamination of unpaved ground.
How should soiled absorbents be disposed of after deploying a spill kit?
Cushions, sheets and granules soaked with hydrocarbons are hazardous waste governed by the OMoD and the OLED. You must pack them in approved leak-tight drums and hand these residues over to a licensed disposal contractor, with typical cantonal treatment costs around 180 CHF per incident.
Who is responsible on site for maintaining spill containment equipment?
In accordance with art. 5 OTConst, the employer must appoint a competent person in charge of safety and health on every construction site, authorised to issue instructions. This designated person inspects the leak-tightness of drip trays weekly, checks standing rainwater levels, and makes sure the emergency spill kit remains immediately accessible.
Why does standard SIA 430 require strict sorting of hydrocarbon residues?
Standard SIA 430 governs the strict management of construction waste to stop pollutants from mixing with inert rubble. Any spill onto the ground requires immediate excavation of the contaminated soil, leading to remediation and chemical analysis costs that can easily reach around 8 500 CHF.
What criminal liability does the site management face if oil leaks?
Under art. 229 CP, anyone who intentionally breaches recognised building rules and thereby knowingly endangers the life or physical integrity of others faces a custodial sentence of up to five years or a monetary penalty. Deliberately omitting spill trays under storage tanks directly triggers this liability.
Operational summary for site installations in Switzerland
Environmental compliance on earthmoving, drilling and structural work platforms demands strict rigour when setting up spill trays and providing neutral absorbents. By combining leak-tight containment trays with rapid-response spill kits, site management prevents groundwater seepage, meets OLED requirements, and avoids work-stoppage orders issued by cantonal environmental authorities.
To take your sites' regulatory and logistical compliance further, explore our technical guides and dedicated selectors:
- Site Logistics, VSS Road Signs, Site Fencing, and Environmental Spill Bunds (OLED / SIA 430)
- Regulatory Swiss Construction Site Vacuum Cleaner Selector (Class L, M or H / HEPA H14) Based on Dust & SUVA OELs
- VSS-Compliant Temporary Construction Site Signs, LED Beacons and Self-Powered Traffic Lights
- Self-Supporting Site Fences and Barriers: Anti-Uplift Ballasting and OPB Acoustic Attenuation Tarpaulins