Skip to content
Sign in Sign up
Categories
Power tools DrillsScrewdriversGrindersSaws Measure Laser levels Protection Protective equipment Site Ladders and stepladdersHand tools
Support
Change language: French
Practical guide

Solid Carbide 4-Cutter SDS-Plus and SDS-Max Drill Bits: Drilling Rebar Without Jamming and Complying With ETA Tolerances

Technical guide to solid carbide 4-cutter SDS-Plus and SDS-Max drill bits in Switzerland: rebar drilling without jamming, ETA anchor tolerances and safety rules.

Table of contents
The 3 Major Site Risks
  1. Financial / Margin: Breakage of a bi-metal carbide head on a rebar and rotary hammer jamming, causing an immediate drop in output. On a heavy-duty anchoring lot, rework and premature replacement of consumables generate direct additional costs of around 15% to 25% on the tooling budget, borne entirely by the contractor pursuant to art. 364 CO.
  2. Legal / Joint / SUVA: Sudden torque kickback when a 2-cutter drill bit jams, leading to wrist trauma or falls from height. If accident prevention measures under art. 3 OPA are not respected, the site management and contractor may face liability under art. 229 CP if accepted engineering practices are violated.
  3. Administrative / Acceptance: Imprecise reaming of an anchor hole by a worn bit out of certified tolerances, leading to the rejection of structural anchors during technical inspection. The client may then demand complete remediation of the fastenings at the contractor's expense in accordance with art. 368 CO.

Drilling dense reinforced concrete imposes extreme mechanical stresses on hammer drills and their consumables. This guide is intended for site managers, project supervisors and foremen faced with longitudinal reinforcing bars and shear stirrups. Using a solid carbide 4-cutter tungsten carbide drill bit stands out from conventional profiles by its ability to cut through steel without starting a lateral deviation or causing destructive jamming inside the hole.

Beyond drilling speed, the geometric compliance of holes directly governs the holding capacity of heavy-duty anchors governed by technical approvals. A symmetrical solid head guarantees a perfectly cylindrical hole, avoiding ovalisation that compromises the bond of anchoring resins or the mechanical expansion of wedge anchors. Choosing the right SDS-Plus or SDS-Max shank protects the hammer mechanism, limits exposure to mineral dust pursuant to art. 33 OTConst and satisfies contractual requirements across all Romand construction sites.

Technical selection criteria: solid carbide geometry, shank system and dust extraction

Selecting a hammer drilling tool for reinforced concrete relies on impact energy dissipation and cutting geometry. A solid, massive head with four cutting edges symmetrical at 90 degrees prevents the destructive snagging encountered with 2-cutter heads upon tangential contact with a rebar. When hitting reinforcing steel, a 2-cutter head undergoes asymmetric torsional torque that deviates the drilling axis or shears the brazed tip. Solid carbide 4-cutter geometry ensures progressive pulverisation of the steel while maintaining the straight trajectory required for structural anchors.

Shank sizing revolves around two industrial standards:

  • SDS-Plus system: Recommended for nominal diameters from 5 mm to 16 mm (tolerated up to 28 mm for moderate depths). The impact energy delivered by light to medium hammer drills remains optimised for secondary fastening work and light anchoring series.
  • SDS-Max system: Essential from 18 mm up to large diameters for heavy-duty anchoring (32 mm and above) or post-installed rebar connections. The enlarged tool cross-section absorbs high rotational torque and higher impact energies without plastic deformation of the tool holder.

The extraction flute plays a decisive role in bit durability and operator safety. Flutes with progressive pitch and quadruple extraction cross-sections reduce wall friction against the concrete and limit thermal build-up in the carbide. According to art. 364 CO, the contractor procures at their own expense the plant and tools required for the proper performance of the works. Using inadequate tools that produce non-cylindrical holes directly engages their contractual liability.

Preserving structural integrity and drilling compliance

Drilling through reinforced concrete requires rigorous coordination with the structural engineer responsible for the load-bearing structure. Severing primary reinforcement unawares compromises the load-bearing capacity of shear walls or slabs. Art. 229 CP punishes with a custodial sentence of up to five years or a monetary penalty anyone who, in managing or executing construction work, intentionally infringes the accepted engineering practices and knowingly endangers the life or physical integrity of persons (monetary penalty or a custodial sentence of up to three years in the event of negligence).

To meet the requirements of technical approvals for structural anchoring, hole taper and diameter must remain within strict tolerances. A solid carbide 4-cutter head prevents hole ovalisation. An ovalised or tapered hole reduces the bonding surface of chemical anchoring resins and alters the mechanical expansion of heavy-duty metal anchors, rendering the fastening non-compliant.

Occupational health, mineral dust and vibrations on the construction site

Hammer drilling generates mineral dust containing respirable crystalline silica along with mechanical vibrations transmitted to the hand-arm system. Planning such work forms part of the general prevention rules set out in art. 82 LAA, whereby the employer must take all measures shown by experience to be necessary, feasible according to the state of the art and adapted to the given conditions, with workers notably using their personal protective equipment. Art. 3 OPA specifies that the employer must take protective measures in line with regulations and recognised technical rules.

On the construction site, art. 33 OTConst requires that ambient air at workstations contain between 19% and 21% oxygen by volume, that limit values for hazardous substances are not exceeded, and that these substances are exhausted to the open air, filtered or diluted by mechanical ventilation. Using hollow suction drill bits connected to absolute-filtration industrial dust extractors captures dust right where it forms inside the hole, eliminating the manual blow-out step that often creates hazardous aerosols. Art. 22 OLT 3 stipulates that noise and vibrations must be avoided or combated through design measures, equipment-level measures, insulation or work organisation. Art. 36 OTConst provides that if noise exposure cannot be reduced below the limit value, appropriate hearing protection must be worn.

Comparison table of drilling solutions for reinforced concrete

Tool configurationApplicable standard and referenceField of application on the construction siteInspection points and maintenance
Brazed-tip 2-cutter SDS-Plus drill bitCode of Obligations (CO) (art. 364 CO)Unreinforced masonry, aerated concrete, sand-lime brick. Not recommended for dense reinforced concrete.Check for brazing tear-out, wear mark on cutting edge, absence of thermal cracking.
Solid carbide 4-cutter SDS-Plus drill bitAccepted engineering practices, art. 3 OPA, art. 82 LAADense reinforced concrete, drilling rebar up to 12 mm, certified chemical anchoring.Diameter check with calliper, centering tip alignment, flute cleanliness.
Solid carbide 4-cutter SDS-Max drill bitContract for work (art. 364 CO), art. 229 CPStructural work, formwork walls, heavy longitudinal rebar, post-installed rebar connections.Wear mark check for diameter compliance, condition of guiding lands, shank lubrication.
Hollow suction drill bit SDS-Plus / SDS-MaxArt. 33 OTConst, art. 18 OLT 3, art. 82 LAADrilling in confined or occupied areas, overhead drilling without prior blow-out cleaning.Vacuum suction flow rate, absence of clogs in central extraction channel, swivel adapter condition.
Diamond core bit for core drillingArt. 22 OLT 3, machine safety ordinance (OMach, RS 819.14)Large diameter penetrations cutting significant steel cross-sections without percussion.Water flushing or vacuum flow, prior structural check with structural engineer, squareness.

Common ordering mistakes, commissioning errors and induced costs

Procuring drilling consumables is frequently plagued by technical misjudgements that directly affect profitability:

  • Selecting 2-cutter tools for heavily reinforced walls: Carbide head failure on the very first rebar encountered leads to the outright loss of the consumable. Replacing four to five drill bits prematurely per shift generates direct extra costs of around 180 CHF to 350 CHF per team per day, not counting unproductive time spent extracting jammed tools.
  • Failing to check wear marks: Extended use of a drill bit with worn outer edges produces an undersized hole. Forcing a mechanical anchor inside causes the expansion sleeve to stick halfway or bursts the expansion cone. Removal and remediation work on non-compliant anchors leads to repair costs of around 250 CHF to 600 CHF per defective fixing point.
  • Non-compliant drill hole cleaning: Neglecting to vacuum out mineral dust residues drastically reduces chemical resin adhesion. Remediating a failed fixing engages the contractor's warranty under art. 368 CO. Art. 367 CO provides that for immovable structures, the client has 60 days to report defects.

Illustrative practical cases (typical scenarios on Swiss construction sites)

The figures and situations described below are illustrative examples constructed for technical analysis and do not represent actual construction sites.

Scenario 1: Drilling for facade bracket fixings on concrete walls (Canton of Vaud)

On a four-storey cast-in-place reinforced concrete office building in the canton of Vaud, a team of three rainscreen facade installers must complete 420 holes measuring 12 mm in diameter to a depth of 110 mm to mechanically fix aluminium brackets. The rebar drawings show tight mesh reinforcement in the outer layer.

The works supervisor initially supplied the team with standard 2-cutter drill bits. On the very first day, three bits suffered cleanly sheared carbide tips upon hitting distribution rebar, halting progress for 45 minutes and damaging the chuck mechanism on one hammer drill. The cost of destroyed consumables and downtime amounted to approximately 320 CHF.

The contractor remedied the situation by deploying solid carbide 4-cutter SDS-Plus bits fitted with wear marks. The remaining 380 holes were completed without a single head failure or axial deviation, maintaining a consistent penetration rate through the steel. Every metal anchor reached its required embedment depth without premature binding, ensuring technical compliance across the entire package.

Scenario 2: Creating post-installed rebar connections with chemical anchors (Canton of Valais)

As part of the extension of a heavily loaded industrial foundation slab in the canton of Valais, a structural work team of four operatives needs to install 160 rebar dowels measuring 20 mm in diameter, drilled to a depth of 300 mm into existing C30/37 concrete.

To curb the spread of drilling dust and eliminate the tedious task of manual cleaning with wire brushes and blow-out pumps, the employer selected solid carbide 4-cutter SDS-Max hollow suction bits hooked up to matched-class vacuum extractors. Pursuant to art. 33 OTConst, dust emissions were captured directly during drilling. This method saved roughly 4 minutes of cleaning per hole, representing a productivity gain of nearly 10 man-hours for the team, while guaranteeing optimal borehole cleanliness for the chemical resin without exceeding geometric tolerances.

Free construction site calculators

Thirty-five trade calculators: site installations, waste, concrete, screeds, insulation, scaffolding. No sign-up required.

View trade calculators

Frequently asked questions

What difference in anchor performance does a 4-cutter head provide compared to a 2-cutter on rebar?

A solid carbide four-cutter head guarantees smooth, cylindrical drilling without jamming on rebar. It prevents hole ovalisation, which is critical for certified anchor bolts. Pull-out costs resulting from defective drilling run to an estimated 420 CHF per anchor, triggering liability under art. 364 CO.

What does art. 365 CO require when encountering unexpected dense rebar?

Under art. 365 CO, the contractor must immediately notify the client or the site management if any circumstance threatens the proper execution of the works. Cutting through a rebar without an engineer's approval alters structural load-bearing capacity. Properly patching an aborted borehole typically incurs an illustrative cost of around 180 CHF.

How should mineral dust be managed under art. 33 OTConst?

In accordance with art. 33 OTConst, hazardous substances must be discharged into the open air, filtered, or diluted by mechanical ventilation so that limit values are not exceeded. Using hollow suction drill bits prevents the inhalation of respirable crystalline silica dust, directly protecting workers' respiratory tracts on the construction site.

What obligations does art. 36 OTConst impose regarding SDS-Max rotary hammer noise?

Art. 36 OTConst requires that if noise exposure levels cannot be reduced below the limit value through technical or organisational measures, suitable hearing protection must be worn. This prevents irreversible hearing damage among operators during intensive hammer drilling phases.

What is the scope of art. 229 CP if rebar is severed unlawfully?

Art. 229 CP penalises anyone who intentionally or negligently breaches the recognised rules of the trade, thereby endangering the life or physical integrity of individuals. Cutting structural rebar without engineering clearance exposes the operator and their managers to criminal penalties in the event of structural failure.

Can the client demand the remediation of an anchor installation under art. 368 CO?

Under art. 368 CO, the client may demand the remediation of a defective work, any restrictive clause being void for immovable structures. An out-of-tolerance borehole that impairs anchor performance requires a complete rework at the contractor's expense, representing corrective work with an illustrative value of around 950 CHF.

Ensuring structural compliance and safety for your drillings

Using solid four-cutter carbide tooling ensures tight control over borehole geometry for structural anchors and preserves the integrity of reinforcement bars in line with the civil engineer's technical specifications. To refine your drilling methods and match your consumables to mineral binders, consult our specialist technical guides:

Art Construction is an independent company: it is not affiliated with the SIA, CRB, SUVA, or KBOB. Referenced norms and standards point to publications from these bodies; only official versions are legally binding.