Free software · 100% in your browser · no data sent

Swiss Work Permits and CFC Diploma Recognition in Construction

Construction candidate or employer: answer a few questions to find out which permit or notification is likely, the order of steps, who applies and what documents to gather. Each result must be confirmed with the authority.

RAM session: closing or reloading the page erases everything. Export before leaving.

Loading...

About this tool

Which Permit to Work in Swiss Construction: G, B, L or C

Hiring on a Swiss construction site requires determining the worker's administrative situation according to their nationality, place of residence and the duration of their engagement. Procedures vary significantly based on these fundamental criteria.

Permit G is intended for individuals who keep their primary residence abroad, in a border zone, and return to their place of residence with the regularity specified by relevant agreements. For an individual coming from a European Union (EU) or European Free Trade Association (EFTA) country who wishes to reside in Switzerland, two main options exist depending on the length of the employment contract. Permit L is issued for short-term activity, generally tied to a fixed-term contract. Permit B corresponds to a longer stay or an open-ended contract. Permit C, which is a permanent residence authorisation acquired after several years of residence, allows working without preliminary entry clearance procedures.

For third-country nationals from outside the EU and EFTA, admission criteria are separate and subject to strict cantonal quotas. The Art Construction studio incorporates a step-by-step questionnaire with two to four questions. By specifying whether the employer is established in Switzerland or abroad, the individual's place of residence, their current residence status, their nationality and the duration of the contract, the tool provides twelve possible outcomes. Each outcome provides a probable overview, which remains to be confirmed with the competent authority such as the cantonal migration or labour market office.

The table below summarises the main scenarios encountered for construction site personnel:

Work title or procedureWorker residenceNationalityIndicative duration or contract
Permit GBorder zone (regular return)EU / EFTAFixed-term or open-ended contract
Permit LSettling in SwitzerlandEU / EFTAShort duration (temporary contract)
Permit BSettling in SwitzerlandEU / EFTALong duration or open-ended
Permit C already heldSettled in SwitzerlandAll nationalitiesFree access to employment
Notification of servicesResidence abroadForeign companyFewer than 90 days per year

Cross-border, Resident or Newcomer: What Changes for the Employer

For a construction business owner or a human resources manager, hiring a cross-border worker or a resident individual involves different administrative procedures. Construction site organisation and document management must incorporate these specifics right from the candidate screening phase.

When hiring under a cross-border permit G, the employer or employee, depending on the practices of the canton involved, submits the application together with the signed employment contract and proof of address in the border area. Withholding tax considerations also apply according to applicable cantonal and international tax agreements. Conversely, the arrival of someone settling in Switzerland to take up employment under permit B or L requires registering their arrival with the local population registry office (contrôle de l'habitant) of their commune of residence, alongside submitting the work permit application.

Supporting documents vary according to status:

  • For a cross-border worker: valid ID document, proof of address in the border country, employment contract or job offer specifying hours and agreed salary.
  • For an individual settling in Switzerland: rental agreement or proof of accommodation, copy of passport or national identity card, Swiss employment contract.
  • For an individual already holding a permit B or permit C: copy of the valid residence title and verification of permission to engage in gainful employment without cantonal restrictions.

A frequent question on construction sites concerns the actual submission of the application: must the employer submit the request directly, or is the employee responsible for completing formalities at the cantonal counter? This division of responsibility varies depending on the canton of assignment and the permit requested. The studio flags these points as specific questions to be addressed directly to the cantonal migration or labour market office.

Deploying Personnel to Switzerland for Fewer Than 90 Days: Service Notification

Construction companies established abroad working on a Swiss construction site for temporary assignments make use of the service notification procedure. This process applies to activities not exceeding 90 days of work per calendar year per company or per posted worker.

This online procedure must be completed prior to the actual start of operations on the construction site. A mandatory timeline rule applies: the notification must be made according to a designated notice period. The website indicates a notice period of eight days, counted in calendar days. This figure is recorded in the studio under "to verify" status and can be amended by the user.

The studio calculates the latest possible day to transmit the notification on an indicative basis:

  1. Enter the planned date for ground-breaking or team arrival on the construction site.
  2. Deduct the eight calendar days corresponding to the specified notice period.
  3. Obtain the indicative deadline for submission to federal authorities.

This calculation does not deduct public holidays and does not take into account emergency technical exemptions. It is therefore necessary to confirm this deadline with the competent authority. If the work is set to exceed the 90-day annual cap, the simple notification procedure no longer suffices: a formal short-term work authorisation becomes necessary, subject to prior examination of working conditions and the labour market by cantonal bodies.

Job Registration Duty with the ORP: Concerned Trades and Timetable

In structural work, finishing work and building services, several occupations are subject to the job registration duty with Regional Employment Offices (ORP). This measure aims to prioritise individuals registered as unemployed in Switzerland when the national unemployment rate for an occupational group reaches a defined threshold.

According to site data recorded for 2026, this threshold is set at 5%. The tool covers fourteen occupational groups, eight of which are subject to the reporting duty for the current year. This list changes annually on 1 January based on federal statistics. Structural work trades, such as bricklayers or construction helpers, regularly feature in these designated categories.

When a vacancy belongs to a subject occupational group, the recruitment timetable proceeds through defined steps:

  • Entering the job opening on the official Job-Room platform.
  • An exclusivity period of five working days (Monday to Friday, without deduction of public holidays in the studio's indicative estimate).
  • During these five working days, only job seekers registered with the ORP and placement advisers have access to the details of the listing.
  • Open publication of the job advertisement on the general market from the day following the expiry of the deadline.

Two major exceptions are stated: the job registration duty does not apply if the employer recruits an individual already registered with an ORP, nor in cases of internal company promotion. Outside these exceptions, publishing a listing on public channels or hiring a worker without respecting this exclusivity exposes the company to statutory penalties.

Prior to Hiring: The Employer's Checklist

Before validating the start date of a new team member on the construction site, the employer must gather and verify several key documents to prevent work stoppages during a construction site inspection.

An eight-point checklist allows reviewing the worker's administrative situation:

  • Valid identity card or passport.
  • Appropriate residence permit or work permit, or proof of application submission with the competent authority.
  • Written employment contract, detailing the specifications, activity rate and job role.
  • Proof of address for the cross-border worker, issued by local authorities in their country of residence.
  • AVS (Swiss old-age and survivors' insurance) insurance number or registration form to open an individual pension account.
  • Affiliation to an occupational pension fund and compulsory accident insurance (LAA).
  • For a foreign company posting personnel, confirmation of the 90-day prior notification.
  • Training records, driving licences and vocational certificates required for the position.

A costly mistake on site is allowing a foreign worker to begin working on the construction site with only an oral promise or without having checked the receipt confirming application submission. During an unannounced inspection by joint commission representatives or migration enforcement authorities, missing a valid permit or confirmation of prior declaration results in the immediate stoppage of the worker and administrative fines for the employer. The professional approach is to demand the official receipt or submission confirmation before granting actual access to work areas.

Subcontractors: Joint Liability and Required Documents

When a general contractor or main contractor entrusts masonry, plastering or building service installations to a subcontractor, their direct liability can be engaged. The Posted Workers Act (LDét - loi sur les travailleurs détachés) establishes the principle of joint and several liability for the contracting builder regarding adherence to minimum wage and working conditions granted by direct or indirect subcontractors.

To limit exposure, the main contractor must request and retain a set of supporting documents before construction site operations begin. The checklist generated by the screening tool includes eight documents to demand:

  1. Certificate from the joint committee stating that the company is up to date according to applicable collective agreements.
  2. Statements of contribution payments to compulsory social security schemes (AVS, AI, APG, AC).
  3. Certificates of affiliation to compulsory accident insurance and sickness daily allowance insurance (IJM).
  4. Proof of occupational pension fund (LPP) contributions and, for structural work, contributions to early retirement schemes.
  5. Recent extract from the commercial register proving the company's legal existence.
  6. Recent debt enforcement register extract demonstrating the absence of payment orders or ongoing bankruptcy proceedings.
  7. Signed solemn declaration according to the standard template established by the State Secretariat for Economic Affairs (SECO).
  8. Inclusion of a contractual clause prohibiting chain subcontracting without prior written consent, accompanied, for foreign firms, by confirmation of the posting notification and proof of payment of the security deposit required by the joint agreement.

Regular verification of these documents protects construction sites against cascading failures and penalties issued by joint occupational committees.

Foreign Diplomas and CFC: The Role of SERI and Procedures

Hiring a worker trained outside Switzerland frequently raises the question of qualification equivalence with the Federal VET Diploma (CFC - Certificat fédéral de capacité). In the Swiss construction sector, the CFC serves as the standard benchmark to assess on-site technical qualifications.

The State Secretariat for Education, Research and Innovation (SERI / SEFRI) is the federal body responsible for handling recognition requests for foreign vocational qualifications. Two distinct scenarios should be noted:

  • Regulated professions: practising the profession legally requires a credential recognised by law (certain safety roles, electrical installation or handling refrigerants). For these sectors, a formal decision from SERI or the delegated authority is mandatory before employment.
  • Unregulated professions: the majority of trades in bricklaying, formwork or painting do not require formal legal authorisation to practice. The employer is free to recruit the worker based on practical skills, but a foreign diploma does not automatically equate to a CFC without going through SERI.

The studio provides an assessment pathway with twenty-one outcomes by crossing the profession's regulatory status, the country where the qualification was obtained (Switzerland, EU or EFTA, third country, or no diploma) and professional experience (documented by employment certificates, undocumented, or none). The studio does not establish any direct equivalence table between a foreign vocational certificate and a specific CFC. Only the competent authority holds the legal authority to grant an attestation of level or recognition of equivalent qualification.

Determining the Collective Agreement Class Accurately

In the Swiss construction sector, working conditions are governed by collective agreements (CCT - convention collective de travail), whether the national framework contract for the main construction trade or cantonal agreements covering finishing work and building metalwork.

These agreements assign workers to wage classes designated by letters such as CE, Q, A, B or C:

  • Class CE: foremen and direct field supervisory staff.
  • Class Q: skilled workers holding a CFC or an equivalent recognised foreign qualification.
  • Class A: workers with extensive practical construction site experience who do not hold a formal certificate.
  • Class B: semi-skilled workers carrying out basic tasks with initial experience.
  • Class C: labourers and construction helpers without specific training or prior experience.

The Art Construction studio never guesses the applicable class. It provides an analysis block that prompts you to compare three practical criteria: whether the qualification is recognised, the years of experience documented by work certificates, and the actual duties performed on the construction site. The employer then selects the class corresponding to the provisions of their collective agreement. No figures in Swiss francs, no minimum wage amounts and no rate schedules are displayed by the studio. Applicable rates must be reviewed directly in the joint agreement governing your company.

What This Guide Does Not Cover, and Transitioning to Jobs or the ERP

This tool serves as methodological guidance to organise hiring and inspection checks on construction sites. It does not constitute legal advice and under no circumstances replaces formal rulings from state departments. Only formal notifications issued by the cantonal migration office, the labour office or SERI determine the legal status of the worker.

Calculations regarding notice periods, ORP exclusivity timeframes and unemployment thresholds are indicative values retrieved from the site on 21.11.2026 under "to verify" status. Specific cases such as cantonal transfers, asylum statuses or multiple concurrent jobs require direct contact with the cantonal authority.

The tool operates free of charge, without registration or account creation. Everything runs directly in your browser: no files are transferred to a server and no information is stored in your computer's memory. As soon as you close or reload the page, all entered data is erased. The printed summary sheet carries an Art Construction watermark, and the CSV export of the checklist states the free version.

To expand on these processes, practical shortcuts are available:

  • For candidates: the button "Create my anonymous construction profile and apply in 1 click on Jobs" transfers only the selected occupation, canton and wage class, without sharing details about permits or nationality.
  • For employers: the link "Post pre-filled opening on Jobs" lets you publish a job opening using identical technical parameters.
  • For back-office administration: the link to the trial of our paid ERP module lets you record your employees, employment contracts and payroll history. The ERP does not automatically import files from the free studio.

To prepare construction site documents and responses to calls for tenders, explore our sections on tenders and bill of quantities estimation, or access administrative management features on our portail for contractors.

Frequently asked questions

What is the maximum duration for a service notification in Switzerland?

The service notification procedure is limited to 90 actual working days per calendar year, whether for the foreign company posting personnel or for an individual worker. If operations exceed this 90-day total during the year, the business must lodge a formal work authorisation application with the competent cantonal authority prior to continuing work on the construction site.

How can you check if a foreign bricklayer or formwork carpenter qualifies as a skilled worker?

To assign skilled worker status corresponding to a CFC, the employer must verify whether the foreign credential has been granted a formal recognition decision by SERI. Without this recognition from SERI, the employer assesses practical experience confirmed by prior employment certificates against the qualification requirements outlined in their collective agreement, without the foreign diploma granting automatic right to CFC status.

What is the notice period for prior notification of posted workers?

According to site records for 2026, the required notice period is eight calendar days before the first day of work on the Swiss construction site. The indicative calculation subtracts eight days from the planned intervention date. This figure carries the "to verify" notation and must be confirmed with the competent federal authorities, as public holidays are not automatically deducted from the calculation.

How long must a construction vacancy remain exclusively listed with the ORP?

For subject occupational groups where the national unemployment rate reaches or exceeds 5%, the exclusivity window is five working days, counted from Monday to Friday. During this period, only job candidates registered with the ORP may view the listing and apply. The employer may only advertise the position across public channels once this period has ended.

Does this tool verify subcontracting agreements?

No. The studio provides an indicative checklist of eight supporting documents to request from your subcontractor based on the Posted Workers Act (LDét) rules. Only the competent authority or a joint committee can confirm the legal standing of a subcontractor. The tool provides no contractual validation and displays neither penalty amounts nor legal article numbers.

Is information entered into the online studio retained?

No, no data is retained. The tool runs entirely within your internet browser without transmission to an external server. The moment you close the window or refresh the page, all questionnaire answers and checklist items are completely cleared from your computer's active memory.

Does Art Construction ERP retrieve results from this free page?

No. There is no automated bridge between this free studio and the paid ERP software. The studio simply offers a link to trial the ERP for businesses wishing to manage contracts, staff and payroll history, without automated transmission of the entries recorded during your browser session.