Skip to content
Website
Sign in Sign up
Practical guide

5S Method Applied to the Warehouse and Service Vans

Standardise construction warehouses and vans in Switzerland using the 5S method and CFST 6508. Cut wasted time and secure your operations on site.

Table of contents
The 3 Major Site Risks
  1. Financial / Margin: Missing tools or scattered supplies cause unplanned trips back and forth between warehouses and suppliers. For a team of three installers, this lost time frequently represents an unproductive extra cost of around 450.00 CHF per unprepared intervention, directly eating into net margins under the contract for work governed by the Code of Obligations (CO).
  2. Legal / Joint Body / SUVA: Cluttered vehicles or improperly secured equipment increase the risk of falling objects during transport and handling. Employers are required to take all necessary measures under art. 82 LAA to prevent occupational accidents, on pain of administrative sanctions from SUVA or formal notice from the labour inspectorate.
  3. Administrative / Acceptance: The lack of calibrated service tools or standard spare parts delays planned milestones and disrupts the contractual schedule. Such recurring disorganisation postpones formal inspections with site management and halts the signing of service reports essential for company invoicing.

In French-speaking Swiss construction SMEs employing 5 to 50 people, the organisation of the main warehouse and the storage inside commercial vehicles dictate daily team efficiency. Applying 5S principles rigorously – sort, set in order, shine, standardise, and sustain – enables business owners, site managers, and foremen to eradicate structural disorder. Incorporating this workshop discipline directly meets the organisational objectives established by directive CFST 6508, transforming every van into a fully operational, self-contained workstation on Swiss construction sites.

Standardising bins, power tool cases, and consumables ensures immediate on-site deployment without logistics hiccups. This workshop system connects directly with the internal quality assurance framework to eliminate material waste and facilitate communication across multilingual teams. Inquiries regarding unit prices are handled within the Soumissions space, while tracking formal acceptances takes place on the Portail.

Operational rollout of 5S: from the central warehouse to site vans

Logistical optimisation in a trade business or workshop across Western Switzerland follows a structured five-step method. Under art. 3 OPA, employers must implement protective provisions and measures aligned with recognised technical standards, which involves designing workstations and storage areas free of hazardous obstacles.

1. Sort (Seiri): removing the superfluous and red tagging

The initial phase involves clearing out the warehouse and vehicle cargo bays entirely. Any item left unused over the past six months receives a red isolation tag. Expired consumables (foams, hardened sealant cartridges, degraded bags of binder) are routed to municipal waste sorting facilities. Damaged power tools or items failing to meet occupational safety requirements are withdrawn from service for repair or scrap. This step frees up an average of one-third of the usable volume in a service vehicle.

2. Set in Order (Seiton): an assigned place for every item

Every tool, measuring instrument, and consumable has an assigned, clearly labelled spot. The accessibility rule requires storing heavy items directly on the van floor, up against the bulkhead partition, to maintain the centre of gravity and prevent cargo shifting. Standardised fastener bins feature written labels alongside pictorial illustrations. In the central warehouse, aisles, emergency exits, and access to fire extinguishers are clearly demarcated with floor markings built to withstand pallet truck traffic.

3. Shine and Inspect (Seiso): ongoing preventive maintenance

Cleaning is far more than a cosmetic chore; it forms the frontline of equipment inspection. Dusting a wall chaser, checking a power cable for wear, or cleaning the optics on a laser level allows teams to spot hairline cracks or mechanical wear before heading out to the site. The Ordinance on the Prevention of Accidents and Occupational Diseases mandates servicing work equipment so that safety remains guaranteed throughout its operational life. Weekly visual checks prevent unexpected breakdowns across construction sites in Vaud, Geneva, or Valais.

4. Standardise (Seiketsu): uniform layouts and visual rules

To ensure versatility across fitters and foremen, the interior layout of every vehicle follows a strictly identical setup by trade. When an employee switches vans, they instantly locate the fastener case or the extension reel in the exact same spot. Shadow boards featuring painted tool silhouettes in the warehouse instantly show if a shared machine is missing.

5. Sustain (Shitsuke): internal audits and accountability

Long-term consistency relies on a monthly fifteen-minute audit routine per vehicle, performed by the workshop manager or site manager. An audit checklist awards a score out of twenty points covering load securing, cleanliness, PPE readiness, and updated inventory lists. This shared discipline roots out operational drift without creating a heavy administrative burden.

Comparative matrix of layout and storage practices

Logistical componentNon-standardised practice (disorder)Art Construction 5S standardSafety impact and Swiss compliance
Securing heavy toolsMachines left loose on bare timber van floorsCrash-tested metal racking with rails and lashing strapsPrevention of crushing and projectiles during emergency braking
Managing fasteners and consumablesTorn cardboard boxes, mixed dimensionsLabelled modular cases with colour-coded organisationElimination of unexpected stockouts on site
Inspection of lifting gear and PPEHarnesses and slings buried beneath rubble or toolsDedicated ventilated cabinet, hung up, shielded from dust and UV raysCompliance with CFST directives and textile fibre integrity
Storage of chemical productsOpen solvents and adhesives sitting near work areasDedicated, ventilated bund tray in warehouse; sealed cabinetCompliance with water and air protection regulations
Central warehouse organisationAisles obstructed by offcut profiles and wooden palletsIndustrial floor markings, clear 120 cm circulation aislesSmooth evacuation and clearance of escape routes per SUVA
Inventory of shared machineryInformal hunting for a core drill from crew to crewVisual dashboard using magnetic booking tagsTraceability of periodic inspections and confirmed availability

Common organisational mistakes and financial impacts

A lack of discipline in logistics operations creates persistent hidden costs that undermine the overall profitability of contracting businesses. For accurate project costing in line with industry standards, contractors rely on dedicated modules without factoring these internal inefficiencies into their unit prices.

Uncontrolled hoarding in service vans

Permanently hauling hundreds of kilos of random fittings, cables, and loose hardware increases the overall vehicle load. This excess weight causes premature tyre wear, excessive fuel consumption, and the risk of fines at cantonal roadside weigh stations. Tying up capital in idle raw materials inside vans instead of supporting operating cash flow is an unnecessary financial drain.

Time lost searching for tools

On a renovation site, an installer spending twenty minutes each half-day searching for a drill bit, an adapter, or a battery charger causes a direct drop in productivity. For a contractor with fifteen tradespeople, this non-productive time represents a financial loss of around 65'000.00 CHF per financial year, undermining competitiveness against competing tenders.

Equipment damage due to lack of maintenance

A rotary hammer stored without its protective case amidst masonry rubble draws in mineral dust that clogs the motor ventilation vents. The expense of repairing or prematurely replacing professional-grade equipment ranges from about 450.00 CHF to 1'200.00 CHF depending on the power rating, an avoidable cost achieved by simply following Seiso cleaning standards.

Illustrative practical cases (typical scenarios on Swiss construction sites)

The following examples are illustrative scenarios designed to model the impact of 5S organisation within Swiss trade businesses.

Scenario A: Plumbing & Sanitary Installations and Sheet-metal Work firm (Canton of Fribourg)

A Fribourg SME with ten employees is carrying out works on three semi-detached villas. Prior to implementing the method, each crew left in the morning with a vehicle loaded at random. Regularly missing multilayer pipe coils or fixing clamps forced the foreman to make two round trips per week to the local wholesale merchant, generating an average non-productive cost of around 520.00 CHF per working week.

Management introduced a standardised setup: labelled modular racking with an established buffer stock (five units of each common diameter), numbered power tool cases, and a two-bin replenishment system at the warehouse. Within two months, runs to distributors dropped by ninety percent, reclaiming eight hours of productive installation time each week across the team.

Scenario B: Interior Joinery and shopfitting SME (Canton of Vaud)

A joinery workshop with twenty-four staff in Lausanne faced repeated damage to finished goods during transport to commercial building sites. Lacquered panels were stacked without proper dunnage against mobile workbenches in the vans, leading to scratches discovered during fitting. Workshop remedial work ran to roughly 8'400.00 CHF over a single quarter, not to mention friction caused with site management.

The workshop supervisor implemented 5S standards: adding padded vertical racks in the vans with quick-release securing straps, banning cutting tools outside their protective sheaths, and placing a magnetic visual checklist inside the rear door. Transport transit damage was completely eradicated on subsequent jobs, safeguarding finished quality.

Frequently asked questions

What budget should you plan to fit out a van to 5S standards?

For a standard commercial van, modular metal racking and divided storage bins represent an estimated illustrative investment of around 3 500,000 to 6 200,00 CHF. This cost pays for itself by eliminating lost consumables.

Who should handle the weekly warehouse audit in an SME?

The workshop supervisor or a designated plant operator carries out the visual inspection using an audit checklist. Directive CFST 6508 recommends regular inspections to ensure workplace safety and uphold designated storage boundaries over time.

How should you handle scrapped metal parts or broken machines?

The red tag area holds all defective parts and damaged tools pending a decision from the operations manager. If repairs exceed the residual value, the equipment is sent to cantonal recycling channels with end-to-end traceability of discarded materials.

Does the 5S system work well with multilingual teams?

Yes, completely. The method relies on visual management through colour codes, silk-screened templates, and standardised pictograms. Tradespeople identify the exact spot for each machine without language barriers, reinforcing practices recommended by SUVA.

How much time should be spent on daily vehicle tidying?

A ten-minute slot at the end of the day allows every crate to be returned to its designated fastening point. The crew avoids haphazard loading and gets straight to work the next day without rummaging through the cargo area to prepare scheduled interventions.

How to Reconcile the 5S Standard with SUVA Requirements

Rational organisation clears clutter from walkways, eliminates tripping hazards and secures the transport of heavy equipment. This approach puts into practice the general duty of prevention set out in the Ordinance on the Prevention of Accidents and Occupational Diseases (OPA).

Standardising material organisation to protect margins

Rigorous application of the 5S method in the warehouse and in service vans transforms the productivity of an SME in French-speaking Switzerland. Reducing search times, cutting out emergency replacement purchases and controlling tool access keep daily operations secure while complying with occupational safety requirements. To strengthen your firm's operational performance, explore our specialised resources:

Art Construction is an independent company: it is not affiliated with the SIA, CRB, SUVA, or KBOB. Referenced norms and standards point to publications from these bodies; only official versions are legally binding.