Skip to content
Website
Sign in Sign up
Practical guide

Processus or Ninety.io (EOS) for Swiss Trades and General Contractors: Selection Criteria

Management comparison for Swiss trades: choose between Processus and Ninety.io based on the LPD, CFST 6508 directive and construction site constraints.

Table of contents
The 3 Major Site Risks
  1. Financial / Margin: Overruns in hourly billing work and duplicate administrative data entry causing profitability drops of 4 % to 8 % of gross margin due to a lack of operational standardisation.
  2. Legal / Joint Body / SUVA: Lack of proof of safety instructions under art. 82 LAA and the CFST 6508 directive, exposing management to direct civil liability in the event of a construction site accident.
  3. Administrative / Handover: Rejection of execution inspection reports and freezing of progress billing during verification under standard SIA 118 due to missing or unarchived inspection sheets.

For the owner of a Swiss construction SME with 5 to 50 employees, structuring work methods is the primary lever to ensure the business thrives without their constant presence. Two management approaches often compete: adopting a general-purpose strategic framework drawn from Anglo-Saxon management systems like Ninety.io (EOS), or deploying an environment tailored to structural work and finishing work trades such as Processus. This choice directly shapes the daily organisation of installation teams, site managers and technical administration staff.

Selecting a management tool is not a cosmetic preference, but a matter of strict alignment with Swiss site execution requirements. You must examine data processing compliance under the LPD, the rollout of safety instructions mandated by SUVA, document access in areas without mobile coverage, and subscription costs billed in CHF. This guide outlines factual, verifiable criteria to help you decide objectively between these software solutions.

Methodological and operational criteria for Swiss construction SMEs

Weighing a general governance platform like Ninety.io (EOS) against a solution tailored to Swiss trades like Processus requires reviewing specific structural criteria. Operating a carpentry workshop, a masonry firm or a finishing work company in Switzerland does not rest solely on tracking quarterly priorities; it demands a direct link between workshop instructions, on-site safety and administrative records.

The first criterion covers standards compliance and occupational health and safety under the CFST 6508 directive and SUVA requirements. Running an MSST system (occupational health specialists) mandates full traceability of instructions issued to installers and plant operators. Under art. 4 OTConst, before work starts, the employer ensures there is a plan detailing the necessary measures for the work carried out on the construction site, including the organisation of first aid. An organisational tool must verify whether safety protocols are actually reviewed and signed off by each worker, rather than remaining tucked away in a paper binder far from field teams.

The second criterion focuses on the actual work environment of your crews. Construction workers frequently operate in reinforced basements, Alpine zones or technical rooms without mobile reception. Providing access to standard operating procedures therefore requires assessing whether an offline smartphone bundle is available and whether scanning a QR code on a control panel or workshop board instantly opens the current version.

The third criterion covers data protection under the Federal Act on Data Protection (LPD). Firms must verify with each vendor where servers are hosted, review subcontracting clauses, and check access permissions when archiving field reports containing photos of private installations or staff absence records.

Comparative decision matrix

This comparison summarizes the checkpoints an SME business owner or construction manager should verify with software vendors before committing their company:

Operational selection criterion Ninety.io (EOS) framework Processus framework Checkpoint for the Swiss tradesperson
Structural mapping of the company Structured around company vision, 90-day priorities (Rocks) and leadership meetings Process map across six modules: Direction (D), Standardise (S), Construction Site (C), Sales (V), Team (E), Finance (A) Check alignment between a corporate management model and trade-specific construction workflows
Rollout of field instructions General task management and seat responsibilities (Accountability Chart) Procedures with photos, revisions, worker "Read and understood" acknowledgements and direct-access QR codes Assess whether visual procedure sheets drive adoption among multilingual crews
Business continuity without mobile reception Standard web app reliant on an active internet connection Offline bundle enabling procedure lookups on smartphones without internet access Test field procedure lookups in basements or cellular dead zones
Execution and monitoring on construction sites Tracking strategic objectives and issue solving (IDS) in weekly meetings Forms filled out in the field with photos, sign-off, progress by type and construction site rollouts Check whether the tool tracks technical hold points or merely high-level projects
Skills and certification tracking Skill allocation based on roles defined in the governance organigram Team module covering roles, absences, skills and certification tracking with expiry dates Verify tracking of validity dates for forklift, mobile elevating work platform or first-aid licences
Pricing structure and business model Recurring international per-active-user pricing billed monthly or annually Flat-rate or role-based pricing adapted to Swiss SME structures Calculate total cost of ownership including rollout on jobsite smartphones

Common implementation mistakes and financial impacts

Imposing a general management system without considering construction site realities leads to recurring breakdowns. The most costly mistake is limiting standardisation to the management team. When processes do not reach the foreperson, installation mistakes multiply during waterproofing work or technical tie-ins. Recurring non-conformities on a finishing work package typically generate remedial work costs of 6 500,00 CHF to 14 000,00 CHF per quarter in unbillable hours and wasted materials.

A second error lies in failing to formalise technical certifications. During inspections by the labour inspectorate or the joint committee, an inability to prove that operators of specialized machinery are qualified disrupts operations. Finally, neglecting signed acknowledgements of safety instructions diffuses site management accountability and undermines internal liability control.

Illustrative practical cases (typical scenarios on Swiss construction sites)

The following scenarios are representative models developed for comparative analysis, not actual case studies of existing companies. Figures in CHF are provided for reference purposes only.

Scenario A: Sheet-metal Work and Roofing Company (18 employees, Canton of Vaud)

A Vaud firm specialising in roof renovation faced repeated rework due to poor flashing detailing around dormers. The owner wanted to delegate inspections without having to visit every site daily. A system geared exclusively to weekly leadership meetings proved inadequate: issues were flagged too late, after the roof covering was already installed. Introducing standardised sheets with mandatory photos before sealing eaves flashing, combined with a QR code in every utility vehicle, allowed forepersons to sign off on work via a mobile field checklist. The firm chose a tool combining the Standardise (S) and Construction Site (C) modules, saving roughly 12 500,00 CHF in rework labor over a nine-month period.

Scenario B: General Renovation Contractor (35 employees, Canton of Geneva)

A Geneva general contractor manages a dozen rental apartment renovations simultaneously. Management hesitated between Ninety.io to steer growth and an operations-oriented process layout. For the six executive members (leadership, finance, sales), the EOS methodology delivered a rigorous meeting structure. However, the disconnect with the twenty-nine site managers and field workers persisted: safety forms and absence logs remained scattered across disparate spreadsheets. The company chose the six-module process map to handle the Team (E) component and process launches per construction site (C). Loading the offline bundle on installers' phones eliminated sign-off delays in underground car parks, keeping subcontractor schedules on track.

Frequently asked questions

How can you align weekly team meetings with CFST 6508 directive requirements?

An operational governance structure includes safety risk reviews on the regular agenda. Prevention measures agreed during these meetings are documented in writing, ensuring the instruction traceability required during cantonal labour inspectorate audits.

What is the best way to deliver operating procedures to multilingual construction crews?

Placing QR codes on tool cabinets or vehicles provides instant access to illustrated work instructions. For Portuguese-speaking or non-native workers, prioritize step-by-step visual guides featuring photos of compliant and non-compliant work, validated via digital sign-off.

What technical setup allows inspection forms to be completed in zones without 4G reception?

Working in basements or Alpine regions requires an offline smartphone bundle. Safety and progress forms filled out offline are saved locally and sync automatically once mobile reception returns, preserving the integrity of daily reports.

What contractual assurances should you require from a software vendor regarding data protection law?

Contractors must ensure data centres are located in Switzerland or in a jurisdiction deemed equivalent under the Federal Act on Data Protection. The data processing agreement must clearly define encryption standards and archiving protocols for employee records.

How can you manage operational cash flow without complex enterprise software?

A rolling thirteen-week cash forecast supported by an internal financial module is sufficient to anticipate 8,1 % VAT payments and social contributions. This tracking prevents liquidity shortfalls before quarterly closings with your fiduciary.

What budget should a 20-employee SME anticipate for process standardisation?

Software and onboarding investments typically range from 4 500,00 to 9 200,00 CHF in the first year. This expenditure should be weighed against the supervisory hours saved on daily crew coordination and correcting production defects.

Operational trade-offs for governing your construction company

Choosing a governance platform for a Swiss finishing work or structural work business comes down to aligning strategic executive leadership with physical site realities. While a managerial framework structures quarterly targets and executive accountability, execution on construction sites demands immediate, offline-ready work instructions that interface with workplace safety requirements. Contractors should carefully evaluate the total cost in Swiss francs, hosting options compliant with the Federal Act on Data Protection, and how easily field teams can adopt inspection procedures without language barriers.

To explore building an autonomous operational structure and securing your internal processes for the long term, consult our methodological frameworks designed for Swiss construction executives:

Art Construction is an independent company: it is not affiliated with the SIA, CRB, SUVA, or KBOB. Referenced norms and standards point to publications from these bodies; only official versions are legally binding.