Skip to content
Website
Sign in Sign up
Guide

MSST System and Organisation for a Building Cleaning Firm (CFC 287) in the Canton of Geneva

MSST organisation under CFST 6508 for CFC 287 cleaning firms in Geneva. Safety protocols, chemical management, and multilingual crews.

Table of contents
The 3 Major Site Risks
  1. Financial / Margin: Extra costs of around 4 500,00 CHF related to redoing window cleaning at height and waiting times during deliveries blocked in dense urban areas.
  2. Legal / Joint body / SUVA: Work stoppage ordered by the labour inspectorate or SUVA for lack of a safety plan under art. 4 OTConst or unsafe handling of chemical products.
  3. Administrative / Acceptance: Refusal to release retainages under standard SIA 118 due to non-compliant finishes during the handover of rental properties.

In Geneva, building cleaning (CFC 287) demands rigorous organisation in dense urban environments. Close quarters on renovation construction sites, restricted city-centre access, and a high proportion of multilingual cross-border workers make immediately understandable operational instructions essential.

To prevent occupational accidents and illnesses, employers apply the principles of art. 82 LAA. Site managers structure end-of-construction work using clear visual sheets tailored to major risks: working at height on glazing, slips, and the safe handling of technical detergents.

Free software, runs directly in your browser

Studio MSST: safety procedures and QR code notices

Build your MSST procedures, print workstation safety sheets and their QR codes. Everything runs locally in your browser, with no data transmitted.

Open software

Major risks in CFC 287 and integration into the Geneva MSST system

In the building cleaning sector in Geneva, implementing CFST directive 6508 requires systematic consideration of four primary hazards typical of dense urban construction sites:

  • Chemical products: inhalation of toxic vapours or skin burns during post-construction stripping, accidental mixing of incompatible products, and non-compliant storage in cramped technical rooms.
  • Falls from height and working on glazing: operations on tilt-and-turn windows, inner courtyards, or glass roofs requiring mobile elevating work platforms or dedicated extension poles.
  • Falls and slips on the level: wet floors during single-disc scrubbing, power cables on the ground, and obstruction of emergency routes shared with finishing work.
  • Order and cleanliness on the construction site: management of soiled waste, immediate disposal of absorbents, and cohabitation with other trades in occupied premises.

The employer records these criteria in the firm's risk assessment, in accordance with the Ordinance on the Prevention of Accidents and Occupational Diseases and the Construction Work Ordinance.

Cantonal specifics: urban constraints and multilingual management in Geneva

Geneva's urban fabric creates severe logistical constraints. Construction sites in the city centre or business districts require strict delivery schedules to avoid traffic congestion. Service vans cannot park long-term on public property without a municipal waiver.

The high proportion of cross-border staff and multilingual crews requires all safety instructions, dilution labels, and procedures to be provided in bilingual visual formats (French, Portuguese, Spanish). Standardised pictograms take precedence over dense text to ensure preventive measures are clearly understood right from shift start.

Priority site procedures for CFC 287

The table below summarises the six fundamental procedures to display in mobile depots and on service vehicles:

Work situation Identified hazard Mandatory preventive measure STOP Point (halt the task)
Acid stripping at end of construction Harmful vapours, eye splashes Forced ventilation, sealed safety goggles, and specific gloves Room without natural or mechanical ventilation
Window cleaning on the 2nd floor Fall over the parapet Harness tied off to a certified anchor point or telescopic pole Absence of compliant anchorage or unstable ground
Wet floor treatment Slips by staff or third parties Rigid area cordoning and slip-resistant footwear Pedestrian traffic not diverted in occupied premises
Clearing residual rubble Puncture wounds, dust Heavy-duty handling gloves, particulate respirator Suspected presence of unassessed asbestos
Power supply for wet vacuums Electric shock in wet environments Suspended cables, waterproof boxes with residual current devices Stripped cable or submerged plug
Handling concentrated detergents Chemical burns from splashes Automatic dilution stations, wearing a face shield Faulty dosing pump or unlabelled container

Organisation of a typical week in a cleaning SME

Smooth coordination relies on three recurring steps each week:

  • Monday (Preparation): review of construction site access, verification of access badges, batching of labelled products, and scheduling of urban delivery slots.
  • Tuesday to Thursday (Instruction): on-site safety toolbox talks led by the team leader, review of STOP points, and visual inspection of personal protective equipment.
  • Friday (Monitoring): site inspection tour for order, sorting and disposal of hazardous waste through licensed facilities, followed by timesheet auditing.

Illustrative practical cases (typical scenarios on Swiss construction sites)

The following amounts and situations are illustrative examples designed to examine risk management.

Scenario: Handover cleaning of an office building in Plainpalais (Geneva)

An end-of-construction cleaning contract covers 2 400 m² of office space and 450 m² of glass roofs. The crew consists of one team leader and seven operatives. Because it is impossible to position a heavy boom lift on the pavement without blocking the tramway, the firm opts for a pure-water pole system fed from an inner courtyard for the facade, combined with secure indoor mobile scaffolding for the atriums. The extra cost of this specialised equipment amounts to 1 850,00 CHF, offset by avoiding traffic disruption and fully complying with occupational safety requirements.

Frequently asked questions

How do you formalise the MSST system for a cleaning SME in Geneva?

CFST directive 6508 requires adapting organisation to real risks. Deploy crew binders and QR code sheets to control chemicals and access safety.

What budget should be planned to equip 15 cleaners with compliant PPE?

Expect an illustrative budget of around 4 860,00 CHF per year for respiratory protection, chemical gloves, and non-slip boots. For an itemised quote, use our dedicated tool.

Who monitors safety on a Geneva end-of-lease construction site?

Cantonal inspectors from the Office cantonal de l'inspection et des relations du travail and SUVA monitor strict compliance with CFST directive 6508 and the OTConst.

How do you manage safety instructions with multilingual employees?

Set up paperless visual sheets translated into several languages. Using clear pictograms ensures site protocols are directly absorbed without operational ambiguity for any operative.

Where are contractual disputes or acceptance reports handled?

Joint inspection is governed by standard SIA 118 on our portal. For collective wage rates, visit the jobs section, and for wage disputes, contact the cantonal labour court.

Managing chemical hazards and access constraints in Geneva's urban environment requires strict protocols compliant with CFST directive 6508. To strengthen your operational processes, tools, and cross-cantonal organisation, explore our specialised resources:

Art Construction is an independent company: it is not affiliated with the SIA, CRB, SUVA, or KBOB. Referenced norms and standards point to publications from these bodies; only official versions are legally binding.