Skip to content
Website
Sign in Sign up
Guide

MSST System and Organisation of a Waterproofing and Specialised Insulation Firm (CFC 225) in the Canton of Vaud

MSST organisation under CFST 6508 for waterproofing firms in Canton of Vaud: flat roofs, fire safety, and mobile site crews.

Table of contents
The 3 Major Site Risks
  1. Financial / Margin: Fire claim linked to blowtorches or site stoppage due to missing edge protection, causing delays and extra costs of 15 000 CHF to 50 000 CHF under SIA 118 rules.
  2. Legal / Joint Body / SUVA: Work stoppage ordered by the labour inspectorate or SUVA for lack of suitable prevention measures under art. 82 LAA and missing hot work permits during bituminous membrane application.
  3. Administrative / Acceptance: Formal acceptance blocked due to a missing safety and health protection plan compliant with art. 4 OTConst or missing solvent safety data sheets.

In the canton of VD, running an SME in waterproofing and specialised insulation (CFC 225) requires rigorous coordination given the logistical access constraints of the Lausanne and Riviera urban fabric. The simultaneous use of open flames for bituminous membranes, fall hazards on flat roofs, and the handling of solvents require CFST 6508 to be integrated operationally on every Lake Geneva construction site.

Work organisation must also take into account harsh weather conditions in the Vaud Jura and Alps, while ensuring safety instructions are properly conveyed to installation teams that are often multilingual and cross-border. Setting up clear processes guarantees smooth operations between crew leaders and technical management.

Free software, runs directly in your browser

Studio MSST: safety procedures and QR code notices

Build your MSST procedures, print workstation safety sheets and their QR codes. Everything runs locally in your browser, with no data transmitted.

Open software

Integrating waterproofing hazards into the Vaud MSST system

Waterproofing and specialised insulation activities (CFC 225) entail three main hazard groups: hot work with blowtorches involving fire risks, falls from flat roofs, and exposure to solvents or chemical bonding agents. Applying directive CFST 6508 requires integrating these factors into the SME's daily planning, aligning technical measures with the specific geographic and human realities of the canton of VD.

Along Lake Geneva, in Lausanne or on the Riviera, cramped access to the flat roofs of older buildings complicates both safe gas cylinder storage and emergency evacuation. Conversely, construction sites in the Vaud Jura or Alps require strict seasonal management: frost, morning ice, and high-altitude winds drastically increase the risk of slipping on smooth substrates. Furthermore, the multilingual makeup of crews and frequent reliance on cross-border workers call for standardised visual media. Safety instructions, solvent safety data sheets, and emergency plans must be provided in French and via clear pictograms to ensure they are fully understood on site.

Priority roof procedures and stop-work points

The table below summarises preventive measures and situations requiring an immediate stop-work order for installation crews:

Work situation Identified hazard Organisational preventive measure Mandatory STOP point
Torch-applied bituminous sheet membranes Fire, severe burns Formal hot work permit, two checked fire extinguishers within reach, continuous post-heating monitoring Absence of operational fire extinguisher or unprotected combustible materials present
Circulation along flat roof edges Falls from height into the void Rigid perimeter guardrail or safety catch scaffolding compliant with the construction work ordinance Edge protection system missing, incomplete, or relocated without authorisation
Application of bonding primer Inhalation of harmful fumes, solvents Appropriate respiratory protective mask, wind direction check, ventilated storage Work in a confined space without adequate ventilation or without a suitable mask
Waterproofing upstand detailing Fall from the roof edge Certified temporary lifeline or individual anchorage with fall arrest system Absence of verified anchor point or defective fall arrest equipment
Material hoisting by crane or winch Falling rolls or insulation materials Hoisting perimeter demarcated on the ground, rigging checked by a trained rigger Overhead swing zone not cordoned off on the ground, or third parties present beneath the load
Winter construction site at altitude in Vaud Slipping on icy substrate, strong wind Prior check of the substrate, snow clearance, suspension of work during severe gusts Untreated black ice on circulation areas or wind preventing the proper handling of sheets

Organisation of the typical week: preparation, briefing and monitoring

Waterproofing SME managers structure their week into three operational phases. On Friday afternoon, internal planning confirms site access, insulation delivery, and the compliance of collective fall protection with site management. On Monday morning, the site safety briefing gathers installers for safety instructions, hot work permit distribution, and personal protective equipment checks. Midweek, the construction manager conducts an unannounced roof inspection covering extinguisher conditions, joint water tightness, and compliance with smoking bans near solvents.

Illustrative practical cases (typical scenarios on Swiss construction sites)

The following data are illustrative examples intended to guide company organisation. During a flat roof renovation in Lausanne on a four-storey residential building, a four-man waterproofing crew had to replace 600 square metres of insulation and lay a two-ply bituminous system. Faced with a narrow lane barring extended parking, the business owner scheduled crane deliveries over a half-day arranged with local police, closing off the pavement. For hot work, the firm implemented a thermal monitoring patrol protocol two hours after turning off blowtorches, logged on an inspection sheet. This strict organisation prevented any fire outbreak and maintained progress without compromising resident safety.

Frequently asked questions

How should hot work permits be cleared for CFC 225 on a Vaud construction site?

The competent person designated under the construction work ordinance applies CFST 6508 using a QR code, requiring one hour of active surveillance amounting to around 95.00 CHF in labour.

Who checks flat roof safety during severe weather in the Vaud Jura?

The crew leader inspects access under the construction work ordinance and CFST 6508, halting work exposed to freezing conditions to safeguard company operating margins.

Which procedure governs solvent and hot bitumen handling in dense urban areas?

CFST 6508 requires fitting applicators with respiratory protection and dispersing fumes according to the construction work ordinance, without citing any extra article numbers.

How do you integrate cross-border temporary workers into MSST waterproofing guidelines?

A formal site induction applies CFST 6508 using bilingual visual instruction sheets, ensuring guidelines are understood under employer authority in accordance with the federal accident insurance law.

Where should quantity survey disputes or handover inspection reports be handled?

Quantity take-offs fall under the tenders section, while verification under SIA 118 switches to the tracking portal, preserving the strict framework of internal organisation.

Strict deployment of the MSST system under CFST 6508 protects the health of Vaud waterproofing installers while securing the operating cash flow of CFC 225 against weather and urban challenges. To explore these operational and contractual procedures further, consult our specialised resources:

Art Construction is an independent company: it is not affiliated with the SIA, CRB, SUVA, or KBOB. Referenced norms and standards point to publications from these bodies; only official versions are legally binding.