Skip to content
Website
Sign in Sign up
Guide

MSST System and Organisation of a Roofing Firm (CFC 224) in the Canton of Fribourg

MSST organisation and CFC 224 safety in Fribourg under CFST 6508: bilingual management, Pre-Alps, high winds, and fall prevention.

Table of contents
The 3 Major Site Risks
  1. Financial / Margin: Cost overrun in the region of 12 000 CHF to 25 000 CHF during an unplanned winter shutdown in Gruyère or when defective waterproofing must be redone under SIA 118.
  2. Legal / Joint body / SUVA: Work stoppage ordered by the authorities following a fall protection defect on an attic roof, pursuant to art. 82 LAA and art. 4 OTConst.
  3. Administrative / Handover: As-built documentation rejected by site management and final account withheld due to missing roof inspection sheets.

In the Canton of Fribourg, running a roofing firm (CFC 224) demands rigorous operational control to handle topographical and climatic constraints. From the Broye plain to the steep roofs of the Fribourg Pre-Alps, roofers face severe winds, early snow loads, and the hazards inherent in older materials that may contain asbestos. The MSST system under directive CFST 6508 provides the essential methodological framework to standardise safety measures and protect crews from falls from height.

Bilingualism in Fribourg presents a daily operational challenge: the SME owner must ensure safety instructions are conveyed immediately in both French and German. Setting up clear procedures, accessible via QR codes on every construction site, ensures proper execution of scaffolding checks and effective internal coordination before laying each roof slope.

Free software, runs directly in your browser

Studio MSST: safety procedures and QR code notices

Build your MSST procedures, print workstation safety sheets and their QR codes. Everything runs locally in your browser, with no data transmitted.

Open software

Integrating roofing hazards into the Fribourg MSST system

The roofing trade (CFC 224) concentrates critical risks governed by the Construction Works Ordinance and directive CFST 6508. Operational management requires a formal response to every identified hazard:

  • Falls from roofs and fragile surfaces: Working on attic roofs, dormers, or corrugated fibre-cement sheets requires edge protection, tinsmith brackets, or safety nets before any access is permitted.
  • Old materials and asbestos: When refurbishing pre-1990 roofs, prior assessment of under-roofing layers, slates, and suspect pipes prevents exposure to harmful dust. Any unexpected discovery requires work to stop immediately and notification of site management.
  • Weather, wind, and frost: Sudden gusts on the plain or Foehn winds require strict anchoring of materials stored on battens and immediate suspension of work on wet or icy surfaces.

Territorial impacts and bilingualism in the Canton of Fribourg

Fribourg's geographic and linguistic profile requires direct adjustments to company governance:

  • Dual-language signage and documentation: With crews operating across the Sarine district, German-speaking Sense, or French-speaking Broye, safety data sheets, equipment manuals, and emergency protocols must be drawn up in French and German to ensure instructions are fully understood.
  • Marked seasonality between plain and Pre-Alps: In Gruyère or the Veveyse district, early snowfall and prolonged frost shorten the outdoor work window from November to March. Operations must be planned to secure the building envelope before severe cold sets in, shifting crews to workshop work or preventive maintenance.
  • Logistical coordination: Narrow access roads in pre-Alpine villages and remote rural areas require suitable lifting equipment and unloading zones secured against strong gusts.

Field procedures and priority hold points for CFC 224

Roofing crews apply six standardised operational procedures on Fribourg construction sites:

Work situationPrimary hazardOrganisational and technical measureImmediate STOP point
Access and movement on roof slopesSlipping, fall into open spacePrior installation of tinsmith brackets and eaves guardrailsNo edge protection at the eaves
Removal of old roofingInhaling asbestos dustChecking diagnostic report prior to tear-off and wetting materialsPresence of unrecorded friable material
Work on corrugated sheetsBreakage of a fragile componentInstalling walkways and safety nets beneath the roofWalking directly on roof elements
Lifting tiles and battensFalling objects or overturning loadsCordoning off the ground zone and wearing hard hatsPersonnel present within the crane swing radius
Installation in high windsLoss of balance, airborne materialsSecuring tile packs and monitoring weather conditionsWind gusts preventing workers from maintaining balance
Work on steeply pitched roofsUncontrolled slipWorking from ground-supported scaffolding or an elevated work platformAttempting access without an approved fall-arrest system

Standard week organisation for a roofing SME

Managing a company of 5 to 50 employees relies on a consistent weekly rhythm:

  • Friday afternoon (Preparation): The site manager signs off on execution plans, scaffolding bookings, and the weekend weather forecast. Bilingual work orders are generated for each team leader.
  • Monday morning (Briefing): Ten-minute safety briefing at the workshop. Review of specific vigilance points for visited attics and inspection of personal protective equipment.
  • Wednesday (Inspection): Unannounced site visit by the competent person to active construction sites, inspecting eaves conditions, ladder access, and signing the safety register.

Illustrative practical cases (typical scenarios on Swiss construction sites)

The following data are illustrative examples developed for operational analysis:

Typical scenario in Gruyère (renovating a traditional attic roof): A roofing firm based in Bulle assigns four workers to replace a clay-tile roof on a pre-Alpine farmhouse. The building features a steep pitch and suspect vintage slates. Faced with the combined risk of fragile materials and early November snow, the owner opts to erect complete facade scaffolding with an extended roofer's bracket, supplemented by an under-roof safety net. Instructions issued to the mixed-language crew are provided in both French and German. The cost of collective fall protection, estimated as a guide between 6 500 CHF and 9 200 CHF depending on site configuration, eliminates any risk of a work stoppage ordered by the cantonal labour inspectorate.

Frequently asked questions

How do you manage French-German bilingualism for safety sheets in Fribourg?

Directive CFST 6508 requires clear communication of instructions. Employers issue bilingual French-German sheets with pictograms, avoiding work stoppages costing around 1 200,00 CHF in lost hours.

Who inspects roofing site safety in the Canton of Fribourg?

SUVA and the Fribourg cantonal inspectorate enforce the Construction Works Ordinance. A lack of safety organisation results in site shutdowns incurring around 4 500,00 CHF in costs.

How do you incorporate the risk of early snow in Gruyère into site planning?

Under the Construction Works Ordinance, employers must adapt measures to adverse weather. Pre-Alpine roofs require rapid tarpaulin protection, limiting water damage often exceeding 8 000,00 CHF.

What procedure should be followed when discovering material suspected of containing asbestos?

Pursuant to the Construction Works Ordinance, work stops immediately for testing. A survey by a certified specialist costs around 650,00 CHF and protects roofers from toxic fibres.

Where should the inspection log for personal fall protection equipment be kept?

The Ordinance on the Prevention of Accidents and Occupational Diseases mandates equipment maintenance. The manager logs annual inspections in a register, avoiding replacing an untracked harness at around 320,00 CHF.

Rigorous implementation of the MSST system safeguards operating margins and crew safety between the plain and the Fribourg Pre-Alps. To explore your procedures further, consult our dedicated resources:

Art Construction is an independent company: it is not affiliated with the SIA, CRB, SUVA, or KBOB. Referenced norms and standards point to publications from these bodies; only official versions are legally binding.