Table of contents
The 3 Major Site Risks
- Financial / Margin: Logistical slowdowns due to alpine access routes and frozen slopes, resulting in scaffolding cost overruns of around 15% of the gross margin without an approved addendum under SIA 118.
- Legal / Joint / SUVA: Work stoppages ordered during foehn gusts or insufficient anchorage, as art. 3 OTConst requires planning that reduces risks to the lowest possible level.
- Administrative / Handover: Refusal to hand over work or disputes over refurbishment minutes if asbestos screening is not documented prior to removing degraded roofing.
Running a roofing company (CFC 224) in Valais demands operational rigour tailored to extreme alpine conditions. Between harsh weather, steep access routes in side valleys, and an operating season heavily compressed by winter, business owners must structure their MSST system under CFST 6508 to control falls from height, asbestos-containing materials, and sudden, violent wind shifts.
In this bilingual cantonal context, operational communication between site managers, team leaders, and French- or German-speaking roofers requires standardised quick-action sheets. Flawless site organisation ensures compliance with safety measures under the Construction Works Ordinance, protects margins against alpine contingencies, and builds reliable coordination with local site management teams.
Free software, runs directly in your browser
Studio MSST: safety procedures and QR code notices
Build your MSST procedures, print workstation safety sheets and their QR codes. Everything runs locally in your browser, with no data transmitted.
Integrating CFC 224 hazards into the MSST system in Valais
Roofing involves recurring critical risks: falls from roofs and through fragile surfaces, aged materials that may contain asbestos, and sudden exposure to changing weather and wind. Art. 5 OTConst requires the employer to appoint a competent person on each construction site responsible for occupational health and safety, empowered to issue directives to workers. Under CFST 6508, company management structures its safety manual by setting strict control workflows, from the preliminary technical site visit through to site clear-up.
The topography of Valais turns every job into a logistical challenge. Long access roads into side valleys and high-altitude construction sites demand absolute equipment autonomy: forgetting rescue or anchorage gear halts production for the entire day. The construction season, cut short by winter, often drives crews to rush during clear autumn weeks, increasing accident rates. Moreover, bilingual teams of French- and German-speaking workers require all safety instructions, operating procedures, and checklists to be available and understood in both languages, preventing any dangerous confusion during violent foehn winds or the removal of suspect materials.
Matrix of priority work procedures and hold points
To standardise conduct on roofs, the business owner posts and issues bilingual safety sheets according to the following operational matrix:
| Work situation | Identified hazard | Mandatory organisational measure | STOP point (work stoppage) |
|---|---|---|---|
| Installation of slates or tiles along eaves and verges | Fall from roof edge | Verification of edge protection systems | Missing or incomplete guardrail |
| Work on aged corrugated sheeting | Fall through a fragile surface | Access walkways and crawl boards | Direct walking on unprotected sheets |
| Stripping of aged sarking membranes | Inhalation of asbestos fibres | Prior diagnostic screening and suitable containment | Degraded material not listed in the building survey |
| Hoisting tile pallets with a winch | Materials falling onto site personnel | Ground exclusion zone and rigging inspection | Presence of a worker beneath a suspended load |
| Work on roof slopes exposed to ridgelines | Sudden wind gusts and foehn | Local weather tracking and securing of materials | Wind destabilising body balance |
| Roof refurbishment under frost conditions | Slips on damp battening or sarking boards | Frost removal, wearing anti-slip safety footwear | Icy walking surface without fall protection |
Organisation of a typical operating week
Operational governance is structured around a strict weekly routine to eliminate schedule friction and health risks:
- Monday morning (Instruction and preparation): Ten-minute safety briefing conducted by the team leader in French or German. High-altitude wind forecast review, PPE adequacy check, and review of the work plan.
- Tuesday to Thursday (Execution and workflow control): Daily inspection of access routes and stability checks of collective fall protection before anyone steps onto the roof. Immediate reporting of any asbestos doubts to site management and company leadership.
- Friday afternoon (Review, site tidy-up, and closeout): Securing weather tarpaulins against weekend winds, lowering tools, cleaning the work area, and returning signed checklists to the technical office for archiving.
Illustrative practical cases (typical scenarios on Swiss construction sites)
The figures and scenarios below are illustrative examples designed to guide the organisation of high-altitude roofing operations.
High-altitude roof renovation in Central Valais
A roofing contractor mobilises a crew of four workers (two French-speaking, two German-speaking) on a chalet at an altitude of 1,600 metres to replace a natural slate roof. The approaching winter snowpack dictates a demanding production pace.
The chosen organisational response is to formally appoint the bilingual foreman as the competent person on the construction site, responsible for enforcing the Construction Works Ordinance. All inspection documents are issued in both cantonal languages. Faced with aged chimney flues suspected of containing asbestos, management logs a strict ban on dry grinding. On the third day, wind gusts exceeding safe limits for handling roof sheets trigger an immediate STOP hold point: the crew halts work on the southern slope and switches to sorting and cutting slates in a sheltered ground area, maintaining worker safety without disrupting the weekly project schedule.
Frequently asked questions
How should a roofing safety plan be adapted to severe winds in Valais?
Under the Construction Works Ordinance, severe weather requires suspending work on exposed areas. The team leader logs the stoppage on the QR sheet, curbing illustrative downtime costs of around 450.00 CHF per hour.
Who acts as the competent person on a bilingual roofing construction site?
In compliance with the Construction Works Ordinance, the employer appoints a manager capable of issuing clear instructions. In Valais, this person communicates technical directives in French or German to the relevant crews.
What procedure applies when suspect materials are discovered on an older roof?
Under the Construction Works Ordinance, any doubt regarding pollutants requires halting work immediately. The contractor notifies site management and awaits diagnostic results before resuming removal operations.
How should a Valais SME structure its cash flow to manage the winter shutdown?
The method recommends a rolling thirteen-week forecast with the accounting firm. The firm plans an indicative liquidity reserve of around 85 000.00 CHF to cover fixed overheads during cold months without billing revenue.
Where are CAN bills of quantities and handover inspection reports processed for roofing?
Detailed costing is managed within the Soumissions space without unit prices here. Joint inspections under SIA 118 and client defect management are handled directly through the dedicated Portail space.
Strict implementation of CFST 6508 and BOSS procedures safeguards roofing operations against the demanding alpine conditions of Valais. For deeper insights into regulatory compliance, dimensioning, and canton-specific frameworks, consult the following industry resources:
- MSST System Under CFST Directive 6508: Standardising Procedures and Quality for a Building Contractor
- Studio MSST and QR Procedure Sheets for CFC 224
- MSST System and Organisation of a Roofing Company (CFC 224) in the Canton of Fribourg
- MSST System and Organisation of a Roofing Firm (CFC 224) in the Canton of Neuchâtel
- MSST System and Organisation of a Waterproofing and Special Insulation Firm (CFC 225) in the Canton of Valais
