Skip to content
Website
Sign in Sign up
Practical guide

MSST and QR Procedures Course: Standardise without Paperwork

Campus course overview: roll out the CFST 6508 MSST system and field QR procedures without adding paperwork to your Swiss construction SME.

Table of contents
The 3 Major Site Risks
  1. Financial / Margin: logistical disorganisation and unplanned trips back to the yard erode operating margins by around 15 000,00 CHF to 45 000,00 CHF per team and per year due to a lack of standardised loading protocols.
  2. Legal / Joint / SUVA: in the event of an accident or failure to comply with prevention rules under art. 82 LAA and the CFST 6508 directive, the firm risks intervention by SUVA or labour inspectors, with work stoppages on unhedged workstations.
  3. Administrative / Handover: the lack of a written plan complying with art. 4 OTConst or of traceability on safety data sheets blocks access to institutional construction sites and delays the sign-off of daywork reports by site management.

This training course is designed for company managers, project managers and site supervisors in Swiss building SMEs employing 5 to 50 staff. Its aim is to structure your operations without creating unnecessary administrative binders. The objective is to translate the obligations of CFST 6508 directive into brief operational procedures, immediately accessible on smartphones via QR codes displayed in workshops, yards and commercial vehicles.

Structured into six practical lessons, this programme teaches how to formalise visual work standards, secure equipment organisation using the 5S method, and handle recurring disruptions with rigour. Detailed cost calculation for tenders and unit prices is covered in our Soumissions module, while employment contracts and collective wage grids are addressed in the Jobs section.

Structure of the six lessons in the training course

The course breaks down the organisation process into six progressive learning steps, built to turn occupational safety requirements and operational workflows into everyday habits on Swiss construction sites. Each lesson tackles a specific methodological skill without increasing the administrative burden of a craft business.

Lesson 1: The CFST 6508 10-point MSST system applied to an SME

Upon completing this lesson, company management will know how to apply the 10 cardinal elements of the CFST 6508 directive to an operational model suited to a workforce of 5 to 50 employees. Emphasis is placed on assessing trade-specific hazards in structural work and finishing work, setting measurable safety objectives, and delegating internal responsibilities without relying on bulky binders that remain locked in the office.

Lesson 2: Drafting visual field procedures of 12 steps or fewer

This lesson teaches a concise drafting method: breaking down a complex process into a strict visual sequence of 12 steps maximum. Learners master the use of annotated photographs, danger pictograms and quality check points, ensuring immediate understanding by all tradespeople, regardless of their native language.

Lesson 3: Deploying QR codes and offline access on construction sites

The operational goal is to digitise access to work instructions right at the work face. Participants learn to produce weather-resistant adhesive labels, configure local smartphone storage to handle network dead zones in basements or rural areas, and link every QR code to the relevant safety document or installation protocol.

Lesson 4: Ensuring procedures are read, understood and signed by teams

This module addresses team engagement and the traceability of work instructions. It details leading safety briefings, checking comprehension through direct questions and collecting digital signatures in the field, enabling you to prove the effective transmission of instructions in accordance with the accident insurance law prevention requirements.

Lesson 5: 5S in the yard and in vans: method and auditing

The fifth lesson provides a structured layout protocol for workshops, stores and service vehicles based on the five principles of the 5S standard. Learners build a visual storage matrix, schedule rolling tool inventories, and establish a monthly audit checklist to scrap defective equipment and cut down unproductive searching time for supplies.

Lesson 6: Handling a non-conformity: 5 Whys, Pareto and corrective action

The final lesson teaches structured troubleshooting for technical and organisational failures. Site managers and project managers learn to apply the 5 Whys method to look beyond human error, rank recurring issues using a Pareto chart, and implement a measurable corrective action to prevent problems from resurfacing.

Teaching methods and integration with digital tools

Each lesson is based on a practical triad designed for working professionals. Detailed written material gathers trade practice rules, application diagrams and ready-to-use audit checklists. This is supported by a 5 to 12-minute mixed-format video combining a concise introduction, live software walk-throughs and clear explanatory graphics. A five-question multiple-choice quiz with normative references concludes each stage to confirm learning outcomes.

The course connects directly with the process management software. Templates built during the practical exercises can be imported immediately into the application to generate QR labels, manage instruction sheets and track digital read-receipts from tradespeople. Invoicing, detailed quantity surveying and unit prices belong to the tenders module. Joint inspection records and punch lists under norm SIA 118 are handled in the site tracking portal. CLA wage scales and employment contracts are managed in HR, while technical execution drawings remain within the CAD module.

Comparison matrix: paper binders versus standard visual QR procedures

The table below contrasts the two operating methods for a Swiss trade contractor.

Organisational criterionTraditional paper-binder approachStandardised visual QR code system
Accessibility of instructionsDocuments stored at the office or in the site hut, seldom consulted by workers.Immediate access at the workstation by scanning the QR code on the plant, panel or van.
Format of instructionsMulti-page dense text and legal jargon that are difficult to digest on site.Visual sheets capped at 12 steps, illustrated with site photos and clear visual markers.
Proof of communicationLoose sign-off sheets that frequently go missing or get signed without being read.Individual digital timestamps upon consultation, making it easy to track read compliance.
Version controlHigh risk of retaining obsolete versions scattered across multiple paper binders.Centralised server updates: the QR code always points to the latest active version.
Offline availabilityPhysical presence of the binder required; paper is prone to tears, oil stains and rain.Offline viewing on smartphones with automatic data sync once network coverage returns.

Common rollout pitfalls and financial impacts

The first common pitfall in SMEs is copying academic quality management manuals word for word without adapting them to the day-to-day work of fitters or bricklayers. A procedure longer than two pages simply will not be read on a construction site. This disconnect leads to repetitive execution errors, with remedial costs typically running between 4 500,00 CHF and 12 000,00 CHF per avoidable defect.

The second issue is the absence of standardised equipment storage in utility vans. Without a visual sorting and organisation routine, technicians waste 20 to 40 minutes every morning searching for small items or making unplanned trips to suppliers. For a contractor running six vans, this lost time equates to an operating shortfall of around 22 000,00 CHF to 38 000,00 CHF per year.

Finally, neglecting written proof of safety briefings leaves employers vulnerable during inspections by labour officials or investigations following an accident. If a failure to meet the general prevention obligations under the accident insurance act and the accident prevention ordinance is established, the firm's liability may be engaged, resulting in site shutdowns and substantial financial claims.

Illustrative practical cases (typical scenarios on Swiss construction sites)

The following scenarios are illustrative case studies designed to analyse organisational choices within trade firms in French-speaking Switzerland.

Scenario 1: Roof renovation in the Canton of Vaud (8 employees)

A roofing and Sheet-metal Work firm is working on a residential rental building in Lausanne. During installation, workers fail to erect edge protection as required by the construction work ordinance. The owner had filed the safety instructions in a binder stored at the yard in Ecublens. The cantonal labour inspectorate orders an immediate work stoppage until the collective fall-arrest systems are brought fully into compliance.

To resolve this issue permanently, the company rolls out the course's QR protocol. A durable metal tag is riveted inside the rear doors of every van. It links to a seven-step visual guide detailing fall-arrest harness tie-off, guardrail checks, and a mandatory pre-climb checklist. Every craftsman signs off on their phone before rigging work starts. During the next inspection, safety arrangements are found to be impeccable and work proceeds without disruption.

Scenario 2: Finishing work in the Canton of Geneva (22 employees)

A Plumbing & Sanitary Installations and ventilation company is working on an office complex in Meyrin. Teams encounter constant delays due to missing parts and defective sealing work on manifold systems. Analysis shows that fittings are scattered across vans without labels, and three distinct assembly methods are being used by installers.

Management tasks its workshop manager with implementing 5S standards and harmonising workflows. All vehicles are fitted out with standardised, colour-coded storage bins. A single, ten-step visual pipe-fitting procedure is published via QR code on every mobile workbench. Within three months, snagging rates drop sharply and trips back to central stores fall, generating an estimated operating saving of 18 500,00 CHF over the quarter.

Frequently asked questions

How do you prove team compliance with safety sheets during a SUVA audit?

Time-stamped digital sign-offs on smartphones confirm receipt. Inspectors review digital logs demonstrating that prevention measures from the construction work ordinance are applied, without requiring cumbersome paper binders.

What budget is needed to equip forty tradespeople with offline mobile access?

Deploying a digital setup costs an estimated 1 800,00 CHF to 3 200,00 CHF for initial software setup, paying for itself within the first quarter through reduced rework.

Does a QR code solution replace the need for an MSST branch solution?

No. The system structures the ten points of the CFST 6508 directive internally. The firm must remain affiliated with its industry branch solution or consult qualified occupational safety specialists.

How do you manage procedure updates without reprinting all deployed QR codes?

The encoded URL points to a dynamic server link. The manager updates the centralised protocol; craftsmen scanning the label at the depot or on machinery instantly view the latest version, ensuring compliance with professional standards.

What financial gain can you expect from standard 5S organisation across a van fleet?

Unnecessary tool searches and round trips back to the depot routinely cost around 4 500,00 CHF per vehicle each year. Methodical standardisation eliminates this wasted time and safeguards construction site equipment.

How do you connect the handling of recurrent non-conformities to employer obligations?

The 5 Whys method pinpoints root organisational failures. The employer complies with the Federal Act on Accident Insurance by tailoring technical instructions to real conditions observed at workstations.

Move forward with operational standardisation for your firm

Setting up rigorous internal organisation does not require administrative overhead when backed by clear visual tools accessible directly in the field. By structuring your operating protocols, tool inspections and preventive duties, you protect your firm's profitability while ensuring flawless compliance with Swiss requirements. For quantity surveying or tender queries, check our Soumissions platform, while snag management is handled through our Portail. Explore our practical resources and take your processes further via the links below:

Art Construction is an independent company: it is not affiliated with the SIA, CRB, SUVA, or KBOB. Referenced norms and standards point to publications from these bodies; only official versions are legally binding.