Skip to content
Website
Sign in Sign up
Practical guide

Processus or Lumiform for a Swiss Construction SME: Selection Criteria

Comparing Processus and Lumiform for Swiss construction SMEs: CFST 6508, SUVA, LPD, offline field use, and total operating costs in CHF.

Table of contents
The 3 Major Site Risks
  1. Financial / Margin: Drift in indirect costs and unproductive hours ranging from 4 500,00 CHF to 12 000,00 CHF per construction site due to flawed quality audits or duplicate administrative entries between field and office.
  2. Legal / Joint Body / SUVA: Non-compliance with preventive measures under art. 82 LAA and the CFST 6508 directive during a SUVA inspection, due to a lack of instruction sheets accessible to and signed by workers.
  3. Administrative / Handover: Inability to document execution compliance for the site management during intermediate checks, delaying contractual approvals under standard SIA 118.

Selecting a digital operations management tool is a strategic decision for managing directors, site managers, and foremen in French-speaking Swiss construction SMEs with 5 to 50 employees. Between a generalist inspection form solution like Lumiform and a modular organisation system dedicated to the industry like Processus, the comparison rests on alignment with Swiss realities: MSST system traceability under the CFST 6508 directive, offline operation in basements without mobile networks, crew credential management, and compliance with the LPD framework for employee data protection.

This page details the objective criteria to check with software vendors to guide your decision based on your internal governance structure, free from marketing spin. Quantities and unit prices are handled within our Soumissions vertical, while handovers under standard SIA 118 are managed on the Portail, and collective labour agreements under Jobs. The evaluation must measure the total cost of ownership in CHF, user-friendliness for multilingual crews, and the rigor with which safety procedures required by Swiss authorities are maintained.

Technical and organisational assessment criteria for a Swiss SME

Choosing between a generalist digital inspection application like Lumiform and a dedicated industry solution like Processus requires a methodical analysis of production constraints for a trade firm in Romandy. The chosen tool must meet industry-specific requirements: offline working environments, worker multilingualism, preventive safety obligations, and strict protection of personnel files.

1. Traceability of the MSST system and the CFST 6508 directive

Implementing the ten points of the CFST 6508 directive requires employers to formalise their occupational health and safety setup. An inspection tool like Lumiform enables you to create custom checklists to inspect personal protective equipment or log visual defects. Meanwhile, Processus directly incorporates an architecture structured into six modules (Direction, Standardiser, Chantier, Vente, Équipe, Argent). Within the Standardiser module, process sheets and work procedures are assigned a unique code (such as S2 or C14). They include version tracking, a restore feature, and a formal "Read and understood" record for each worker. SUVA or cantonal labour inspectors can thus verify that health and safety instructions have actually been delivered.

2. Offline operational continuity and field access via QR code

Work carried out in basements, alpine areas, or shielded structures frequently takes place without 4G or 5G network coverage. The mobile app must include a complete offline package. Lumiform offers local synchronisation of audit forms for deferred entry. Processus ensures pre-downloading of an offline bundle containing all operational procedures and forms to be filled out. On the construction site, direct access to instructions is gained through a QR code placed on workstations or machinery. This code always opens the current version of the document, preventing the use of outdated paper copies.

3. Competency tracking and crew certification expiry dates

Tracking staff qualifications is essential on construction sites involving special hazards. Form-based software requires building tracking sheets manually or exporting entries to an external spreadsheet. In Processus, the Équipe module gathers individual records, roles, absence notifications, as well as the skills and trade qualifications matrix with automated expiry tracking. This internal traceability enables the site manager to verify a plant operator's or fitter's clearance before assigning them to a construction site.

4. Employee data protection and LPD compliance

Logging individual evaluations, sign-off sheets, and photographs of workers constitutes personal data processing under the Swiss Federal Act on Data Protection. The SME must verify server hosting locations, encryption standards, role-based access rights, and the ability to export full sections to satisfy data subject access requests with each vendor. For payroll or contractual matters, CLA wage scales and employment agreements are handled separately in the jobs section.

5. Pricing model and overall operating cost in CHF

Financial analysis goes beyond the monthly licence fee per user. It must include time spent on initial setup, template creation, training foremen, and maintaining document links. Time lost to designing blank templates from scratch represents an indirect cost estimated at 3 200,00 CHF to 7 500,00 CHF for a fifteen-worker firm during its first rollout quarter. Estimating unit production costs and price quotations is handled in the tenders workspace.

Comparison table of operational decision criteria

Evaluation criterionForm-based solution (e.g., Lumiform)Modular construction system (Processus)Impact for the Swiss SME
Document structureFree-form creation of blank forms, checklists, and audit sheets.Map of six modules: Direction (D), Standardiser (S), Chantier (C), Vente (V), Équipe (E), Argent (A).Time saved at startup if the SME is looking for a ready-made industry method.
Procedure managementInspection reports generated after on-site logging.Procedures with version history, rollback, photos, and validation status.Guarantees the use of the company's official standard operating procedures.
Field access to instructionsSearch for audit templates within the mobile app.Scan a QR code to open the current version; offline package on phone.Instant document access, even in basements without mobile coverage.
Worker engagementInspection validated via on-screen electronic signature."Read and understood" confirmation by worker and task tracking with receipts.Traceable proof that safety rules were delivered during SUVA inspections.
Human resources managementFocused on executing on-site compliance checks.Équipe module: invitations, roles, absences, skills, and certification deadlines.Monitoring refresher deadlines for mandatory safety training courses.
Site coordinationAssignment of corrective actions following a failed inspection.Launching site processes, forms by type, meetings with logged agendas.End-to-end management of site preparation and formal commitments.

Common implementation mistakes and financial impacts

The primary mistake observed is the proliferation of unstructured digital forms. Swapping paper binders for dozens of digital checklists without a guiding framework disorients field staff. Time lost to re-entering data and searching for files creates productivity drops of around 4 800,00 CHF to 9 200,00 CHF per year for a ten-person crew.

The second issue is failing to verify offline operation. Being unable to open an installation procedure or a self-inspection sheet inside an excavation or an underground car park quickly leads workers to abandon the tool. Finally, failing to archive safety records securely leaves the company exposed to disputes during joint commission audits. Minutes of joint inspections under standard SIA 118 are tracked directly through the site portal.

Illustrative practical cases (typical scenarios on Swiss construction sites)

The following examples are illustrative scenarios with figures designed to guide company management, not actual case studies.

Scenario 1: Finishing work contractor in Geneva (14 employees)

This plastering and painting contractor works mainly on residential building renovations in the canton of Geneva. Management initially used a form-based app for walk-through inspections. Faced with compliance issues regarding dust safety and work at height, they decided to switch to Processus. Placing QR codes on equipment stores and collecting "Read and understood" sign-offs on S2 procedures enabled them to formalise their MSST system under the CFST 6508 directive. Site managers use the Meetings screen to lock in coordination agendas, curbing internal disputes over unconfirmed tasks.

Scenario 2: Structural work SME in Valais (32 employees)

Active in alpine residential construction in Valais, this firm frequently copes with mobile dead zones and seasonal turnover among masons. Selecting a digital tool centered on two core requirements: offline mobile sync and credential tracking with expiry alerts in the Équipe module. The firm formalised its site preparation workflows (module C) and rebar inspection sheets prior to pouring concrete. All technical drawings and formwork plans remain managed separately in the plans space in line with current standards.

Frequently asked questions

How can you confirm a software tool meets SUVA standards?

Neither SUVA nor the CFST 6508 directive certifies any specific software. The employer must ensure the platform logs traceable audits, identifies hazards, and assigns concrete measures to crews on site.

Which offline access setup is best suited for structural work?

In basements or alpine valleys lacking mobile networks, local document viewing and offline form completion are vital. Verify with the software provider that data syncs automatically as soon as connectivity returns.

What requirements does the LPD impose on data hosting?

The Swiss Federal Act on Data Protection requires appropriate organisational and technical measures. Under art. 8 LPD, the controller must ensure personal records are secure, specifically by verifying server locations.

How do you handle non-native speakers on safety forms?

Company owners must verify that health and safety rules are understood by every worker. Check interface clarity using pictograms, guided workflows, or multilingual translations directly during live software demos.

What subscription costs should a 15-person SME budget for?

Market pricing in Switzerland typically ranges from 15 to 60 CHF per user per month depending on the provider. Request a comprehensive quote covering initial onboarding, data storage, and technical support.

Where should you handle quantities, site handovers, and labour contracts?

These items are handled in dedicated management modules. Visit our specific spaces: CAN pricing on /soumissions/, handovers under standard SIA 118 on /portail/, collective labour agreements and hiring on /jobs/, and technical drawings on /plans/.

To structure your craft SME, compare Processus and Lumiform based on objective criteria: ease of data entry, offline mode, compliance with directive CFST 6508 and total annual cost in CHF. Validate each feature with the software vendors before deployment.

To take your operational standardisation and safety prevention on Swiss construction sites further:

Art Construction is an independent company: it is not affiliated with the SIA, CRB, SUVA, or KBOB. Referenced norms and standards point to publications from these bodies; only official versions are legally binding.