Skip to content
Website
Sign in Sign up
Guide

MSST System and Organisation of a Roofing Firm (CFC 224) in the Canton of Geneva

MSST organisation under CFST 6508 for CFC 224 roofing in Geneva. Urban construction sites, roof safety, and operational site management.

Table of contents
The 3 Major Site Risks
  1. Financial / Margin: Direct operating losses in the range of 15 000 CHF to 45 000 CHF when a construction site is shut down for unsafe access or logistical delays in Geneva's dense urban environment.
  2. Legal / Joint Body / SUVA: Work stoppage by SUVA for lack of fall protection on roofs and joint committee inspection under CFST 6508 and art. 82 LAA.
  3. Administrative / Acceptance: Formal acceptance blocked under standard SIA 118 due to defective temporary waterproofing or non-compliant handling of asbestos-containing materials on an old roof.

In Geneva, running a roofing firm (CFC 224) demands operational rigour to handle dense urban fabric, tight delivery access, and work on occupied buildings. Crews face major risks of falls from attics and roof spaces, fragile old roof structures, and bise wind gusts along the harbour. The high share of cross-border and multilingual workers calls for visual, standardised, and immediately understandable safety instructions.

Integrating an MSST system under CFST 6508 structures foremen supervision right from the preparation phase. This approach protects project profitability by securing lifting equipment and formalising the detection of suspicious materials before any work begins. Bill of quantities and unit prices matters fall under the Soumissions section, while employment contract matters are handled under Jobs.

Free software, runs directly in your browser

Studio MSST: safety procedures and QR code notices

Build your MSST procedures, print workstation safety sheets and their QR codes. Everything runs locally in your browser, with no data transmitted.

Open software

Major hazards in CFC 224 and Geneva-specific factors

Roofing work (CFC 224) involves critical hazards: falls from roofs and through fragile surfaces, old materials that may contain asbestos, and weather and wind. In the Canton of Geneva, these constraints intensify due to a very dense urban fabric, construction sites on occupied premises, and complex logistics requiring public highway occupancy permits. Managing bise gusts across the Lake Geneva basin requires continuous weather monitoring to halt the lifting of lightweight elements as soon as gusts destabilise roofers.

The composition of Geneva crews, characterised by a large proportion of cross-border workers and multilingual personnel, makes bilingual visual aids (French and Portuguese or Spanish) essential. Displaying instructions via pictograms ensures proper communication of directives on roofs, in accordance with art. 5 OTConst, which requires appointing a competent person on each construction site empowered to give instructions and dismiss anyone whose behaviour creates a danger.

Priority on-site procedures for roofers in Geneva

The MSST system structures the trade contractor's execution standards. The table below summarises the six critical situations encountered on roofs across the canton and defines mandatory hold points:

Work situationIdentified hazardOrganisational and technical measureSTOP Point
Work on pitched roofsFall from the roof edgeCheck tinsmith scaffolding platform or perimeter guardrail before accessAbsence of collective edge protection
Replacing old corrugated sheetingPresence of asbestos dustConsultation of prior diagnostic survey and tailored work instructionsDegraded material not listed in diagnostic survey
Removal of translucent roof sheetingFall through a fragile surfaceInstallation of load-distributing crawl boards and safety nets underneathUnprotected or uncovered fragile surface
Reroofing in strong bise windsLoss of balance and blown materialsHalt handling of large panels and ballast stored materialsGusts destabilising workers' balance
Tile delivery in narrow streetsCollision with road users and pedestriansMarking out ground footprint and banksman guidance during crane manoeuvresUnsecured unloading area at ground level
Emergency tarpaulin sheeting during severe weatherSlipping on wet battensContinuous attachment to a compliant anchor point via fall arrest systemAbsence of structurally verified anchor point

Organisation of the typical week: preparation, briefing and monitoring

A Geneva roofing SME structures its supervision around a strict weekly routine to uphold safety without eroding profitability:

  • Monday morning (Instruction): Fifteen-minute briefing by the foreman. Presentation of site-specific hazards, personal protective equipment check, and allocation of tasks matched to language proficiencies.
  • Wednesday (Operational inspection): Site safety inspection by the site manager. Check scaffolding fixings, net conditions, and clearance of walkways on occupied roofs.
  • Friday afternoon (Logistical preparation): Lookahead for material orders for the following week, confirmation of urban delivery slots with site management, and roof space tidy-up.

Illustrative practical cases (typical scenarios on Swiss construction sites)

The following situations are illustrative examples designed to model the operational and financial management of a roofing firm:

Typical scenario: Roof renovation on a residential building in Plainpalais (GE)

An SME of 12 employees carries out the complete refurbishment of a 450 m² roof on an occupied five-storey building. The crew consists of a foreman, two skilled roofers, and a temporary labourer. The narrow street prevents delivery trucks from parking for extended periods.

The operational choice adopted is to schedule two supply runs using a crane truck at 06:30 in the morning, having reserved the public thoroughfare in advance with the competent cantonal authority. Before tearing off any of the existing roofing, an inspection of the attic reveals suspicious unlisted ventilation ducts. The site manager applies a STOP hold point, notifies the site management, and awaits analytical clearance before resuming. This foresight avoids exposing workers and shields the firm from an administrative shutdown costing around 4 800,00 CHF per working day in downtime.

Frequently asked questions

How should safety onboarding for cross-border roofers in Geneva be structured?

The employer formalises a bilingual booklet containing quick-reference sheets under directive CFST 6508. Initial training for urban roofs represents an indicative budget of around 480,00 CHF per employee.

Who authorises access to old roofs in dense urban settings?

The designated person under the Construction Work Ordinance checks the hazardous materials survey. Any unexpected finding suspends work and requires written notification to the site management.

What protocol applies during sudden wind gusts across the canton?

The foreman halts exposed work as soon as wind compromises worker stability under the Construction Work Ordinance. Securing the site accounts for around 350,00 CHF in bad-weather hours.

How should tile deliveries be coordinated in Geneva's city centre?

Planning involves reserving the public thoroughfare with the local municipality. To prepare specification quotes and detailed roof quantities, visit our dedicated platform section.

Where should inspections of fall arrest and restraint equipment be recorded?

The responsible person logs each periodic inspection in the safety register under the Federal Law on Accident Insurance. Joint inspection records with the client are managed through the tracking portal.

Managing a roofing SME in Geneva demands steady operational discipline balancing traffic constraints, multilingual workforce management, and fall prevention. To delve deeper into firm management, standard procedures, and regional construction specificities, explore our specialised resources:

Art Construction is an independent company: it is not affiliated with the SIA, CRB, SUVA, or KBOB. Referenced norms and standards point to publications from these bodies; only official versions are legally binding.