Aller au contenu
Website
CFC · eCCC-Bât · CAN Tool 1.4 Online

Interactive Translator for CFC, eCCC-Bât, CAN (NPK) Codes and ACIP Chapters

Find the equivalent code in the CFC, the eCCC-Bât, the CAN and the ACIP chapters with a single search.

Interactive tool

Correspondence between CFC codes, eCCC-Bât codes, CAN chapters and ACIP chapters
CFC code (SN 506 500)eCCC-Bât code (SN 506 511)CAN / NPK chapter (CRB)ACIP 2026 chapter & direct linkReference SIA standard

ACIP 2026 reference table: the codes are those of the ACIP reference and are not contractual. The CAN / NPK catalogue and the CFC and eCCC-Bât standards are the property of the CRB: consult it for the complete official list.

Embed this calculator on a website page

Paste this code into the page, or write [outil code="1.4"] in the content of a page on the site.

📄 File linked to this tool (free)

Move from calculation to full management

Keep your references at hand, then automate them in your quotes, bids and final statements.

⚡ Automate this calculation in our ERP / Soumission software (Trial)

Technical reference guide

What is the difference between a CFC code (SN 506 500), an eCCC-Bât code (SN 506 511) and a CAN chapter number (NPK)?

Three coding systems coexist in Swiss construction, and the same item often carries three different numbers: one for the budget, one for the building element, one for the description of services. This guide offers the complete list of CFC codes Swiss construction alongside the other two systems. To find which CFC code for masonry electricity painting tiling PAC (heat pump), simply type the trade into the search engine above: the CFC and CAN NPK correspondence and the ACIP chapter appear on the same line.

1. The CFC (Construction Cost Code): the classification by trade used in budgets and general estimates (CFC 1 to CFC 9)

The SN 506 500 CFC standard, published by the CRB, classifies the costs of a building into ten main groups. It is the code of budgets, general estimates and final accounts: "211" designates, for example, masonry work.

The main groups of the CFC, from 0 to 9
CodeMain group
CFC 0Land
CFC 1Preparatory works
CFC 2Building
CFC 3Operating equipment
CFC 4Landscaping & External Works
CFC 5Incidental costs and suspense accounts
CFC 6Free (unassigned)
CFC 7Free (unassigned)
CFC 8Free (unassigned)
CFC 9Furnishings and decoration

2. The eCCC-Bât (Element-Based Construction Cost Code): modern costing by functional element (Excavation C, Structural work D, Facades E, Roof F, Building services G, Finishes M)

The SN 506 511 eCCC-Bât standard by elements describes the building by its functional elements rather than by trade: the same facade brings together the wall, the insulation, the render and the windows. The first letter indicates the group: C for excavation, D for structural work, E for facades, F for the roof, G for building services, M for finishes; the following digits specify the element (for example M2.3 for a ceramic floor covering).

3. The CAN / NPK (CRB Catalogue of Standard Items): the 3-digit chapter numbers used to write SIA 451 tenders

The CAN CRB Switzerland chapters (NPK in German) are the three-digit numbers that structure tender specifications: 241 for cast-in-place concrete, 314 for masonry, 671 for tiling. These are the ones you find in an architect's SIA 451 file, which the free converter opens and which the IFC reader completes on the model side. The text of the catalogue items belongs to the CRB and is not reproduced here.

Complete Official Correspondence Table: 35 ACIP Chapters ↔ CFC Codes ↔ eCCC-Bât Codes ↔ CAN Chapters

Each line links a chapter of the ACIP 2026 price list to its CFC, eCCC-Bât and CAN codes and to the reference SIA standard; the chapter links to its technical sheet. The table is grouped into four families of work.

1. Preparatory Work, Earthworks, Civil Engineering and Structural Work (CFC 11, CFC 20, CFC 211)

Preparatory Work, Earthworks, Civil Engineering and Structural Work (CFC 11, CFC 20, CFC 211)
ACIP chapterCFC codes (SN 506 500)eCCC-Bât codes (SN 506 511)CAN / NPK chapters (CRB)SIA technical standard
01. Site Installations CFC 113 Shared site installations
CFC 211.0 Site installations (masonry)
A2 Preparatory work
C1 Excavation and foundations
D1 Structural work
CAN 113 Site InstallationsSIA 118 / OTConst
02. Demolition & Pollutants CFC 111
CFC 112
CFC 122
B1 Deconstruction
B2 Remediation
CAN 111
CAN 112
CAN 123
OLED Art. 16 / SIA 430
03. Earthworks & Excavations CFC 201 Excavations / EarthworksC1 Bulk excavationCAN 211 Excavations and earthworksSIA 118/201 / SIA 267
04. Civil Engineering & Pipework CFC 15
CFC 237
CFC 421
C2 Buried networks
I1 Roadways
CAN 223 Roadways
CAN 237 Drainage and sewer pipes
SIA 190 / VSS standards
05. Special Foundations CFC 171 Piles
CFC 172 Excavation enclosures
C2 Deep foundations
C3 Shoring
CAN 171 Piles
CAN 172 Excavation enclosures
SIA 267 / SIA 118/267
06. Reinforced Concrete & Masonry CFC 211.4
CFC 211.5
CFC 211.6
C4 Excavation and foundations
D1 Structural work
D2 Structural work
D3 Structural work
D4 Structural work
CAN 241 Cast-in-place concrete
CAN 314 Masonry
SIA 262 / SIA 266
13. Scaffolding CFC 211.1 Façade scaffoldingA2 Preparatory works
E2 Working scaffolding
CAN 114 Working scaffoldingSIA 222 / OTConst

2. Roof Framing, Building Envelope, Waterproofing, Facades and External Joinery (CFC 214 to CFC 228)

Roof Framing, Building Envelope, Waterproofing, Facades and External Joinery (CFC 214 to CFC 228)
ACIP chapterCFC codes (SN 506 500)eCCC-Bât codes (SN 506 511)CAN / NPK chapters (CRB)SIA technical standard
07. Timber Framing CFC 214 Timber assemblyD2.2 Structural work
D4.2 Structural work
F1.1 Roof
CAN 331 Load-bearing timber structuresSIA 265 / SIA 118/265
08. Steel Construction CFC 213
CFC 272
D2.3 Structural work
E2 Façades
H3 Metalwork
CAN 321 Steel
CAN 632 Metalwork
SIA 263 / SIA 358
09. Flat Roof Waterproofing CFC 224.1 Flat roof waterproofingF1.2 Flat roof coveringCAN 364 Waterproofing works for flat roofsSIA 271 / SIA 118/271
10. Roofing (Tiles/Slate) CFC 224.0 Pitched roof coveringsF1.3 Pitched roof coveringCAN 363 Pitched roofs, underlaysSIA 232/1
11. Sheet-metal Work CFC 222 Sheet-metal WorkF1.2 Roof
F1.3 Roof sheet-metal work
CAN 362 Sheet-metal workSIA 232/2
12. Façades & External Insulation (ITE) CFC 226.2 Rendered external insulationE2.2 Façades
E2.3 Façade cladding
CAN 348 Rendered external thermal insulationSIA 243 / SIA 233 / AEAI
14. Windows & External Doors CFC 221 Windows, external doorsE3.1 Façades
F2.1 Windows and external doors
CAN 371 Windows and French windowsSIA 331 / SIGaB 002
30. Blinds & Shutters CFC 228 External closures, solar shading——SIA 118

3. Building Services — Electrical, HVAC (CVC), Plumbing, Photovoltaics and Lifts (CFC 23 to CFC 26)

Building Services — Electrical, HVAC (CVC), Plumbing, Photovoltaics and Lifts (CFC 23 to CFC 26)
ACIP chapterCFC codes (SN 506 500)eCCC-Bât codes (SN 506 511)CAN / NPK chapters (CRB)SIA technical standard
15. Electrical Work (Heavy/Light Current) CFC 232 Heavy-current installations
CFC 233 Light fittings
G1 Building servicesCAN 511
CAN 521
NIBT
16. Heating & Heat Pumps (PAC) CFC 242G3 Building servicesCAN 531SIA 384
17. Ventilation (CVC) CFC 244G4 Building servicesCAN 541SIA 382
18. Plumbing & Sanitary Installations CFC 251G5 Building servicesCAN 551W3
19. Photovoltaics & Solar CFC 232
CFC 242
G1 Building services
G3 Building services
CAN 511
CAN 531
NIBT / SIA 384
20. Home Automation & EV Chargers (VE) CFC 232
CFC 233
G1 Building services
G2 Building services
CAN 511
CAN 521
NIBT
31. Lifts CFC 261G7 Building servicesCAN 581SIA 500

4. Interior Fit-Out, Screeds, Plastering, Floor Coverings, Painting, Carpentry, Kitchens and Landscaping (CFC 27, CFC 28, CFC 42)

Interior Fit-Out, Screeds, Plastering, Floor Coverings, Painting, Carpentry, Kitchens and Landscaping (CFC 27, CFC 28, CFC 42)
ACIP chapterCFC codes (SN 506 500)eCCC-Bât codes (SN 506 511)CAN / NPK chapters (CRB)SIA technical standard
21. Screeds (Cement/Anhydrite) CFC 281 Floor coveringsM2 FinishesCAN 651SIA 251
22. Plastering & Drywall CFC 271M1 FinishesCAN 661SIA 242
23. Tiling & Ceramics CFC 281.6 Tiling
CFC 282
M2.3 Ceramic floor coverings
M3.3 Ceramic wall coverings
CAN 671 TilingSIA 248 / SIA 118/248
24. Parquet & Wooden Floors CFC 281M2 FinishesCAN 664SIA 253
25. Resilient Floors & Resins CFC 281M2 FinishesCAN 664SIA 253
26. Painting & Wallpapering CFC 285M4 FinishesCAN 675SIA 257
27. Interior Joinery CFC 273M1 FinishesCAN 622SIA 118
28. Fitted Kitchens CFC 258G6 Building servicesCAN 644SIA 118
29. Glazing & Mirror Work CFC 27——SIA 118
32. Fireplaces & Stoves CFC 241——SIA 118
33. Landscaping & External Works CFC 421I2 Landscaping & External WorksCAN 181SIA 318
34. In-ground Swimming Pools CFC 422I3 Landscaping & External Works—SIA 118
35. Construction Cleaning CFC 287M5 FinishesCAN 691SIA 118

ACIP 2026 reference table, given as a guide: it is not contractual and must be confirmed against the CRB publications before any contractual use. A dash indicates a code not specified in the reference. The CFC, the eCCC-Bât and the CAN are CRB publications.

⚡ Price an item in Soumission

Frequently Asked Questions on the CFC, eCCC-Bât and CAN Classification in Switzerland (FAQ)

1. Which CFC code should I use for masonry, electricity, painting, tiling or a heat pump?

To find the right code, type the trade into the search engine: masonry and reinforced concrete fall under CFC 211, electricity under CFC 232, painting under CFC 285, tiling under CFC 281.6 (floors) and 282 (walls), heating and the heat pump under CFC 242. The matching CAN code and ACIP chapter appear on the same line.

Assigning a service to a code can depend on the element concerned (floor, wall, ceiling) and on the classification chosen by the architect: when in doubt, follow the one in their specification.

2. Can a CFC code be converted automatically into a CAN chapter?

Not in a strictly one-to-one way: the CFC classifies costs by trade for budgets, the CAN (NPK) breaks services down into description chapters, and the same CFC code can correspond to several CAN chapters, and vice versa. The table on this page gives the usual correspondence, line by line, with the ACIP 2026 price chapter.

For a quote or a tender, keep the code of the project's classification and use the table to find the price chapter.

3. Where can I find the complete official list of CFC, eCCC-Bât and CAN codes?

The SN 506 500 (CFC) and SN 506 511 (eCCC-Bât) standards and the catalogue of standard items (CAN / NPK) are published by the CRB (Swiss Centre for Rationalisation in Building), which holds the rights. The translator on this page is a reference correspondence table; it does not reproduce the catalogue texts.

For the complete and up-to-date list, and for the use of the items in your specifications, consult the CRB.

4. What is the ACIP chapter shown next to a CFC code for?

The 35 ACIP 2026 chapters structure the price list of the Soumission software by trade. Next to each CFC, eCCC-Bât or CAN code, the ACIP chapter shows where to find the corresponding prices to cost an item, and the link leads to the chapter's technical sheet.

The "Cost in Soumission" button opens the software to estimate the item with the ACIP 2026 base and the geographic adjustment for your canton.

Indicative information. The CFC (SN 506 500), eCCC-Bât (SN 506 511) standards and the CAN / NPK catalogue are published by the CRB.

📥 Ready-to-use pack · free

Download the document

The file is displayed on screen right away and we also send it to you by e-mail.

Your address is used to send you this file. See our privacy policy.