Skip to content
Website
🧱 CFC 214Carpenter safety: roofing, lifting and wood dustChapter 7 of 10 in the section

MEWPs in carpentry: ground bearing capacity, harness in the basket and limits

In timber framing, mobile elevating work platforms (MEWPs) frequently replace facade scaffolding for assembling trusses or timber frame elements. Using them requires absolute rigor: stabilising the machine on firm ground, systematically clipping into the basket, observing the manufacturer's wind limits and mastering operation following specific training.

Key takeaways

  • Checking ground bearing capacity and using hardwood spreader plates prevent tipping.
  • Wearing a harness with a short lanyard remains mandatory as soon as one steps onto the basket floor.
  • Operating the MEWP is prohibited as soon as wind speed exceeds the manufacturer's limit.
  • Operating a MEWP requires specific training and instruction in emergency rescue manoeuvres.

Ground bearing capacity and harness anchorage inside the basket

Positioning a mobile elevating work platform on a carpentry construction site requires a prior inspection of the supporting surface. The loads transferred to the ground by the outriggers or wheels of a boom lift are considerable and can cause sudden punching shear through uncompacted backfill, poorly reinstated trenches or a curing concrete slab. Before extending the articulated boom toward the installation area for purlins or rafters, site management must validate ground stability and ensure that the slope does not exceed the maximum permissible value set by the manufacturer.

Inside the basket, the primary hazard is the "catapult" effect, caused by an articulated boom snagging on a timber structure or by a sudden movement of the chassis on the ground. In accordance with art. 82 LAA, the employer takes the necessary measures to prevent accidents, and workers must use the personal protective equipment provided. Art. 29 OTConst provides for the application of equivalent protective measures when installing fixed edge protection is not feasible. The carpenter must attach their harness to a dedicated, certified anchor point at the bottom of the basket using a short lanyard or an energy-absorbing retractable lanyard that prevents any ejection over the guardrail.

  1. Visual inspection of the groundIdentify the presence of underground services, fresh backfill or hollow-core slabs. Check the levelness of the terrain.
  2. Placement of outrigger spreader padsPosition non-deformable spreader plates under each outrigger pad to distribute the load over an area suitable for the ground's bearing capacity.
  3. Anchorage of fall arrest equipmentAttach the connector of the personal fall arrest system exclusively to the certified anchor point of the basket before any vertical movement.

Meteorological limits and mandatory operator training

Working at height using a MEWP is strictly dependent on weather conditions. When handling large-surface timber frame components, such as roof cassettes or cross-laminated timber (CLT) panels, the sail effect considerably increases the overall windage. Most manufacturers set an operating wind limit of 12.5 m/s (approximately 45 km/h). The site foreman monitors gust speeds using a portable anemometer on the construction site. As soon as the critical limit set by the manufacturer is reached, the basket must be brought back to the ground without delay.

Sail effect in carpentry
Aerodynamic phenomenon whereby a large-dimension timber panel catches the force of the wind, transferring significant horizontal forces to the MEWP boom and risking destabilising the machine.

Operating a MEWP may only be entrusted to qualified carpenters who have completed specific theoretical and practical training for Category 2A or 3B work equipment according to Suva recommendations. This training covers daily pre-use inspections, checking hydraulic systems, operating emergency lowering controls, and assessing hazards associated with overhead power lines and approaching the timber structure.

Ground stability and harness anchor points in the MEWP

Operating a mobile elevating work platform (MEWP) on a carpentry construction site requires strict adherence to ground conditions. Before deploying an articulated or scissor lift for lifting and placing trusses or structural panels, the ground's bearing capacity must be formally verified. The stresses transferred by outriggers or wheels onto backfilled, waterlogged or uncompacted ground risk causing the machine to overturn directly.

Under art. 29 OTConst, when standard collective protection cannot be deployed, equivalent protective measures must be implemented by qualified personnel. Inside the MEWP basket, wearing a fall arrest harness is mandatory. Personal fall protection equipment (PPE against falls) must be connected via a short restraint lanyard to the specific anchor point provided by the manufacturer inside the basket to prevent operator ejection in the event of a catapult effect.

Safety requirements for using MEWPs in carpentry
Safety elementTechnical criterionCarpenter's inspection action
Ground bearing capacityPressure under pads and compactionVisual inspection, placement of load spreader pads
Harness attachmentCertified anchor point in the basketFastening the short lanyard before moving the boom
Overall stabilityPermissible levelling and maximum cross-slopeChecking the chassis spirit level and tilt indicator lights

Wind-related operational limits and operator training

Weather conditions represent a critical constraint during the assembly of timber frame elements from an elevating platform. Due to the high windage of timber frame panels or glulam elements during erection manoeuvres, wind speed must be monitored continuously on the construction site.

In accordance with art. 82 LAA, the employer is required to take all necessary preventive measures adapted to the state of the art to protect workers' health. Operating a MEWP requires the driver to have completed certified specific theoretical and practical training. This instruction guarantees proficiency in emergency manoeuvres, adherence to maximum basket capacities and control of boom trajectories near existing timber structures.

  • Daily monitoring of wind speed using a handheld anemometer at the installation height.
  • Verification of valid specific operator certification for the category of MEWP used.
  • Visual inspection of the basket, emergency stop devices and ground emergency controls before any elevation.
  • Absolute prohibition against climbing onto the basket guardrails to gain extra working height.

Handling contingencies and emergency procedures on a MEWP

Operating a mobile elevating work platform (MEWP) on a carpentry construction site requires immediate responsiveness to deteriorating working conditions. In the event of ground subsidence beneath an outrigger, a sudden wind gust exceeding the limit specified by the manufacturer or hydraulic failure of the boom, the site manager and the foreman must stop the manoeuvre without delay. The safety of the carpenters in the basket takes precedence over continuing to lift or fix structural elements.

  1. Immediate stoppage of workReturn the equipment to its transport/safe position as soon as the wind exceeds the limit permitted by the manufacturer or if an outrigger pad sinks into the ground.
  2. Rescue and basket evacuationUse the ground chassis emergency descent control in the event of MEWP failure. Never unclip from the basket to jump onto the timber frame.
  3. Analysis and recording on the construction siteRecord the incident in the site logbook and inform the competent safety officer according to OTConst before any return to service.

When access to the assembly area remains impossible with a MEWP due to unimprovable poor ground bearing capacity or persistently adverse weather, site management must adapt the construction method. The provisions of the Construction Works Ordinance require equivalent protective measures to be planned. The temporary stoppage of the MEWP is logged, and schedule adjustments are tracked closely to prevent any accident risk during the placement of structural hardware or purlins.

Frequently asked questions

Can one unclip from the MEWP to step onto a timber purlin?

No, it is strictly forbidden to unclip from the certified anchor point inside the basket to climb onto the timber structure. The safety harness must remain connected to the MEWP anchor point as long as the operator is inside the basket. To work directly on the timber structure, other collective protective measures or specific restraint systems must be planned.

What should be done if the ground softens due to rain during works?

At the first sign of an outrigger sinking or loss of levelness, the basket must be lowered to the ground immediately. Ground conditions must be inspected, the area of outrigger pads and spreader plates increased, or the support zone compacted before resuming any work at height with the lift.

Who is authorised to operate a MEWP on a carpentry construction site?

Only carpenters who have completed specific MEWP operator training and have been formally appointed by the employer are authorised to operate the machine. The operator must be familiar with the operation of ground controls, load limits, fault detection and emergency lowering procedures.

How should wind be measured on the construction site before elevating the MEWP?

The foreman or the MEWP operator must measure the wind speed using a handheld anemometer at the working height. The measured value must never exceed the operating wind limit set by the manufacturer in the machine's operating manual, taking gusts into account.

Texts and standards cited

  • OTConstorganisation of occupational safety and appointment of a competent person responsible for safety
  • OTConst art. 29other fall protection measures where installing a guardrail or scaffolding is technically impossible

In the same section