Skip to content
Website
🧱 CFC 283Section 5 of 610 chapters

Finishing: sealing, oil and wax: the execution standard

This section compiles Swiss best practice rules for selecting, applying and maintaining finishes on parquet floors and wooden floor coverings in accordance with SIA 253. Intended for site managers, foremen and qualified parquet installers, it details the chemical and mechanical behaviour of floor sealers, hard oils and waxes, linking the quality of the protective film to the building's usage requirements and the maintenance handed over to the client.

  • 10chapters
  • 22 000words
  • 6sections in the training course
  • 60chapters in total

Key values to remember 4

norme SIA 253

40 to 65%

Relative air humidity required during application

norme SIA 253

15 °C

Minimum substrate and ambient air temperature

norme SIA 253

8 to 10 days

Complete cross-linking period before laying waterproof carpets

norme SIA 253

100 to 120 g/m²

Average consumption of sealer per coat with a roller

Technical scope of finishes and construction site interfaces

Surface treatment is the final stage of the parquet installer's work (CFC 283). It determines the durability of the floor, its resistance to mechanical wear and its performance against domestic chemical agents. In accordance with SIA 253, the application of a varnish, oil or wax may only begin on parquet that has been properly sanded, dedusted and moisture-stabilised. The parquet installer accepts technical responsibility for the cohesion between the various coats and for the conformity of the final appearance.

The boundaries of the trade require rigorous definition of responsibilities on Swiss construction sites. The parquet installer checks the screed drying reports drawn up by the screed layer (CFC 281), but does not carry out the initial calcium carbide measurement. Similarly, perimeter connections, skirting boards and wooden thresholds fall under the carpenter (CFC 273), while painting applied to wall surfaces belongs to the plasterer-painters (CFC 272). Any finishing treatment on wooden flooring requires precise ambient conditions to prevent blistering or drying delays, particularly with regard to underfloor heating operated by the heating installer (CFC 241).

In terms of products, this section deals exclusively with solid wood, engineered wood or thick veneer floor coverings. It excludes interior vertical joinery lacquers and stains, as well as wood-free flooring resins. When applying products containing solvents or releasing volatile organic compounds, art. 33 OTConst requires air quality to be managed through effective ventilation or vapour extraction to ensure respiratory protection for applicators.

Intervention method and learning timeline

Progression through the ten chapters follows the actual course of a project, from the initial technical specification through to the refurbishment of old floors. The first two modules lay the foundations for choosing the coating: the decision between open-pore penetrating oil and film-forming sealer depends directly on the traffic in the room and the level of maintenance accepted by the client. System sizing follows, with an analysis of the number of coats, the essential use of an insulating primer against tannin bleed and the mastery of intermediate mechanical keying.

  • System selection according to traffic, maintenance and aesthetic constraints (U5-01).
  • Establishment of the coat system, waiting times and calibration of abrasives for keying (U5-02).
  • Roller application techniques without lap marks or excessive thickness (U5-03).
  • Saturation to refusal with hard oil, use of the single-disc machine and immediate wiping of excess (U5-04).
  • Polymerisation control, reopening times for traffic and heavy load management (U5-05).

The second part of the course covers special operations and after-sales service. Staining is a delicate phase due to the uneven absorption of the wood; preliminary in-situ sampling is legally required under art. 365 CO to prevent disputes over appearance. The following chapters detail the delivery of the work, with the written handover of cleaning protocols, and then explore surface renovation operations and spot repairs, which fundamentally distinguish oiled finishes from sealed varnishes.

Technical comparison of parquet flooring finishing systems
Technical criterionPolyurethane / acrylic sealingNatural hard oil or wax
Film formationContinuous film-forming on the surfaceImpregnation into the bulk without a closed film
Resistance to standing stainsVery high once fully polymerisedMedium, depends on pore saturation
Spot repairImpossible without visible demarcationEasy via local sanding and re-impregnation
Periodic regenerationComplete sanding down to bare woodMaintenance oil without mechanical stripping

📘 Chapters in this section 10

Finishes: lacquer, oil and wax

Varnished or oiled: appearance, resistance, local repairability and lifetime maintenance

objectively compare closed-film and open-pore impregnation to guide the client with confidence.

Finishes: lacquer, oil and wax

How many coats: use of the room, priming coat, intermediate sanding between coats

Define the number of coats and the sanding grit suited to the traffic of the treated premises.

Finishes: lacquer, oil and wax

Applying: direction, wet-on-wet, exit through the door and lap mark

Master the roller application technique to permanently eliminate unsightly joins and excess thickness.

Finishes: lacquer, oil and wax

Oiling: saturation, penetration time, wiping off the excess and sticky surface

Saturate the grain without creating sticky areas using the single-disc machine wiping method.

Finishes: lacquer, oil and wax

When to walk on it: pedestrian waiting time, waiting time before furniture, rugs, and full curing

Plan traffic phases to prevent premature marking of the film during its chemical cross-linking.

Finishes: lacquer, oil and wax

Staining: essence reaction, sample on the floor itself, and non-reversible tint

Validate colours directly on the construction site to neutralise any risk of irreversible aesthetic disputes.

Finishes: lacquer, oil and wax

Handing over the floor: care instructions, prohibited products, pads and doormat

Hand over compliant maintenance instructions and protect your legal guarantee against the use of corrosive products.

Finishes: lacquer, oil and wax

Renovating without complete sanding: keying, refreshing coat and limits

Extend the service life of a sealer by resurfacing without engaging in unnecessary heavy sanding.

Finishes: lacquer, oil and wax

Local repair: sanding of the area, oil blending, and the varnished finish which cannot be touched up

Erase scratches and stains on oiled floors without leaving halos or redoing the entire room.

Finishes: lacquer, oil and wax

Patina: wood changes colour, the sun leaves marks under rugs, and this is not a defect

Demonstrate technically why yellowing under solar radiation is part of the natural life of wood as a material.