Key takeaways
- A localised touch-up alters the surface grain and becomes clearly visible under raking light.
- A full skim coat over the whole surface eliminates ghosting from thickness differences and unifies the texture.
- The financial choice between complete remedial work and a price reduction depends on operating constraints and the schedule.
- Any technical or financial agreement requires a countersigned written confirmation to formally close the dispute.
Localised repair and the optical trap of raking light
When a flatness defect or an excess joint thickness is found on a dry-lining partition, the immediate temptation on site is to scrape and re-fill only the affected area. This spot approach rarely works on walls exposed to full-height glazing or to continuous recessed light fittings. The visibility of a localised repair does not come only from a residual difference in thickness, but from a physical break in the continuity of the surface texture.
Every localised sanding or scraping operation changes the orientation of the mineral fillers in the plaster and the porosity of the plasterboard's paper facing. Even when perfectly levelled with the trowel, the reworked area has an absorption and a micro-roughness different from the rest of the board. As soon as light strikes the wall at an angle of less than twenty degrees, the cast micro-shadows reveal the repair halo as a matt, raised or hollow patch, immediately picked up by visual inspection.
To eliminate any risk of aesthetic dispute, a full skim coat of the surface is the only reliable technical answer. This method consists of applying a continuous thin coat of plaster over the entire wall section, from one internal corner to the other, without interruption. It is applied with a smoothing blade sixty or eighty centimetres wide, ensuring an even layer about one millimetre thick.
By making the texture uniform across the whole developed surface, the plasterer removes the variations in porosity between the paper facing and the reinforcing tapes. The overall intervention does require careful preparation of the floors and protection of adjacent joinery, but it guarantees uniform behaviour of the wall under all angles of natural or artificial lighting.
Technical decision and formal validation of the non-conformity
Faced with a surface that does not meet the agreed tolerances, the team leader or site manager must quickly choose between two routes: commit resources to redo the work in full, or offer financial compensation. The Code of Obligations (CO) provides for these options: under art. 368 CO, the client may in particular demand that the work be remedied or request a price reduction proportional to the reduction in value.
| Site criterion | Direction: Full skim coat | Direction: Price reduction |
|---|---|---|
| Intended use of the room | Reception hall, living room with glazing, lit stairwell. | Technical rooms, cellars, archives without natural raking light. |
| Impact on the schedule | Lead time compatible with the following trades. | Critical path affected, high risk of delay penalties. |
| Type of lighting | Permanent raking light or indirect architectural lighting. | Diffuse overhead lighting or windowless rooms with little use. |
| Overall economic balance | Cost of rework lower than the hours spent on meetings and expert reports. | Remedial work disproportionate to a purely visual loss. |
The choice between rework and price reduction rests on a cold analysis of what is worthwhile. Spending several half-days in adversarial site meetings, drafting disputed records and blocking the planning of the finishing work trades creates an indirect cost that very quickly exceeds the value of a full skim coat done in a single day. As soon as the wall is in a main circulation area, complete rework is economically necessary to end the dispute.
If the parties opt for financial compensation because the schedule no longer allows the work or because the defect remains marginal, a written agreement on the chosen solution must be drawn up without delay. In accordance with the principle of art. 1 CO, a contract is concluded by the exchange of mutually consistent declarations of intent; this agreement must state the exact reference of the partition concerned, the agreed amount of the deduction, the formal waiver of any later remedial work and the release of the plasterer from liability for this item.
From spot patch to full skim coat: the physical reality of the surface
Trying to correct a flatness defect or a spot mark in the middle of a large wall section without reworking the entire field of view almost always ends in an aesthetic failure. On a work that has been accepted or is under assessment, a localised touch-up introduces a double discontinuity: a change of surface texture and a break in the substrate's absorption. Even when sanded to refusal with a fine abrasive on a dust-extraction block, the repair halo produces an area whose porosity differs from the rest of the paper-faced plasterboard or the smoothed plaster.
Under an oblique light source, natural or artificial, the visibility of a localised repair is striking. The patch creates a micrometric swelling that is imperceptible to a rigid straightedge but sufficient to cast a shadow or to reveal matt ghosting through the later coats of primer. The dry-lining tradesman then faces the classic dilemma: persist with successive spot sanding and re-filling, or switch immediately to a full skim coat of the surface to bury the area in one continuous plane.
A full skim coat of the surface consists of drawing a thin finishing plaster over the whole board, edge to edge. To go from a standard level to a surface able to withstand demanding aesthetic requirements, the work requires a wide smoothing blade used without any break in the material. This operation makes the grain uniform, neutralises the variations in suction between the original paper facing and the joint tapes, and removes any optical threshold.
| Evaluation criterion | Localised repair with the knife | Full skim coat of the wall |
|---|---|---|
| Texture uniformity | Visible break around the edge of the touch-up | Perfect continuity of the grain over the whole wall section |
| Substrate porosity | Marked difference between paper facing and compound | Uniform absorption across the whole substrate |
| Result under raking light | Ghosting and deviation of light reflections | Continuous optical flatness from one corner to the other |
| Management of site time | Fragmented interventions and recurring disputes | Single intervention, clean drying, direct acceptance |
Deciding between full rework, price reduction and written agreement
When a non-conformity is formally recorded by site management with regard to the works contract or the requirements of the SIA 118 standard, two contractual routes emerge: remedial work at the contractor's expense, or a financial settlement by price reduction. The plastering project manager must assess clearly the balance between the real cost of a full skim coat and the amount of the deduction demanded by the client in order to accept the work as it stands.
Full remedial work is often economically preferable to a prolonged negotiation if the wall is free of any technical obstacle. Holding up payment certificates and multiplying adversarial meetings with the architect to defend a borderline flatness tolerance generates administrative costs higher than applying a thin skim coat from corner to corner. The calculation must include mobilisation of equipment, protection of floors delivered by other trades and the final cleaning of the construction site.
If the client accepts a minor imperfection with no functional impact, the option of a price reduction must be framed immediately. To avoid any dispute at the final account, the choice between rework and price reduction is never settled tacitly. A written agreement on the chosen solution is the only legal document able to release the contractor definitively from the obligation to remedy. This document specifies the exact designation of the rooms concerned, the visual tolerances accepted and the net amount agreed as a deduction from the final invoice.
- Joint inspection record of the defectsRecord the misalignments or flatness defects under lighting agreed contractually, in the presence of site management, without extrapolation.
- Internal comparative costingCalculate the time needed for an overall skim coat, including perimeter protection, against the financial claim for an overall price reduction.
- Formalising the agreement protocolDraft and have countersigned an addendum for partial acceptance that expressly records the definitive abandonment of the claims for rework in return for the agreed amount.
Deadlock on the construction site: exit protocol and traceability
When site management disputes the flatness or uniformity of a plasterboard facing or a smoothed plaster finish, the construction site quickly slides into a sterile subjective debate. The foreman's frequent temptation is to multiply small localised touch-ups with the spatula to put out the conflict. With natural raking light from a window, these spot patches create a mosaic of different textures and absorptions. Under oblique light, these repairs create satin-like reflections or excess thicknesses that draw the eye more than the original defect.
If the dispute over the conformity of the work persists, the site foreman must stop the additional touch-ups immediately and organise a joint visit. The inspection is carried out under the normal lighting conditions planned for the use of the room, and not with a site floodlight aimed at the partition. At this stage, two technical and contractual routes open up: carrying out a complete thin skim coat of the whole surface from corner to corner, or negotiating a recorded financial price reduction if the defect remains minor and purely aesthetic.
- Immediately draw up a joint record describing the precise element in dispute, its exact measured quantity and the lighting conditions at the time of the inspection.
- Objective costing of remedial work by overall skim coat versus the amount proposed as a financial reduction on the final invoice.
- Joint signature of a written addendum by site management and the plasterer before any new operation on the partition concerned.
- Formal validation of the substrate by the painter before applying the primer coats, thereby releasing the dry-lining contractor from liability.
The written agreement remains the only safeguard against unexpected payment retentions at the final account. Accepting an oral compromise on the construction site exposes the plasterer to seeing the same defect reclassified at the formal acceptance of the work under the SIA 118 standard. As soon as the agreement is initialled, the chosen solution binds the parties definitively and unblocks the progress schedule of the other trades.
Frequently asked questions
Why does a spot touch-up on plasterboard remain visible after drying?
The touch-up changes the surface condition locally. Fresh plaster does not have the same porosity or the same shrinkage as the surrounding dry plaster. When sanding, the periphery wears the fibre of the board's paper facing, creating a micro-edge. Under raking light, this variation in micro-texture scatters the light differently, forming a matt or shiny patch that is immediately noticeable against the rest of the wall.
How do you choose objectively between complete rework and a price reduction?
The decision depends on the use of the room and on the overall cost. In a corridor or living room with full-height glazing, a partial touch-up always fails visually: a full skim coat over the whole surface is required. In a windowless room, a technical room or behind heavy wall covering, the defect does not affect use. A negotiated reduction of a few percent then avoids disproportionate hours of labour.
Who must bear the cost of a full skim coat on a partition judged non-compliant?
If the level of finish agreed in the contract is not reached because of defective execution of the joints or the framework, the cost of rework falls on the plasterer. On the other hand, if site management demands afterwards a higher flatness suited to raking light that was not indicated in the original plans, this full skim coat constitutes an order for additional work that can be invoiced.
What must the written agreement contain to close the non-conformity definitively?
The document must record the precise location of the wall, the description of the defect found and the validated solution: overall rework or a quantified price reduction. It must expressly state that the agreement settles any aesthetic dispute on this facing and bear the date and the signature of site management. This protocol avoids any later dispute at the final acceptance under the SIA 118 standard.
Texts and standards cited
- norme SIA 118General conditions for the execution of construction work, governing acceptance of the work, notification of defects and the procedures for remedying them or reducing the price.
