Skip to content
Website
🧱 CFC 411Planting, irrigation and living soilsChapter 2 of 10 in the section

Tree pit: useful soil volume, root collar at the correct level and staking

This chapter details the rules for earthworks and tree planting in external works. You will learn how to calculate the actual volume of useful topsoil based on the adult size, prepare the pit to avoid the basin effect, position the root collar at the exact finished level after settlement, and implement staking or guying adapted to site constraints.

Key takeaways

  • The volume of loose soil determines root development and the future survival of the woody plant.
  • JardinSuisse recommendations require an excavated pit that is at least three times wider than the root ball.
  • The root collar of the tree must be flush with the finished soil level after natural settlement.
  • Staking or guying anchorage stabilises the root ball without compressing the bark for three full seasons.

Calculate the useful soil volume and prepare the excavation pit

Opening a pit to the exact dimensions of the root ball is equivalent to locking the plant in an underground pot. In compacted soil or ground disturbed by civil engineering machinery, roots hit smooth, hard walls. They coil around themselves instead of colonising the surrounding soil, which leads to the decline of the specimen after a few seasons. The supply and placement of structured topsoil represent the main investment in the planting item.

To guarantee long-term anchorage and nutrition, JardinSuisse guidelines and landscape construction rules advocate a volume of loosened arable soil directly related to the growth vigour of the tree at adult age. In confined environments or under permeable paving, these volumes must be arranged as continuous pits or connected rooting trenches.

Recommended useful arable soil volume according to the growth of the specimen
Tree sizeExample of speciesMinimum useful soil volumeUseful working depth
1st size category (> 15 m)Platanus acerifolia, Quercus robur12 m³ to 15 m³80 cm to 100 cm
2nd size category (8 m to 15 m)Acer campestre, Betula pendula8 m³ to 10 m³70 cm to 80 cm
3rd size category (< 8 m)Prunus cerasifera, Malus sylvestris4 m³ to 6 m³60 cm to 70 cm
  1. Excavation and wall managementExcavate with a mini-excavator, opening a diameter equivalent to three times the diameter of the root ball. Systematically scarify the side walls with the toothed backhoe bucket or a spade to break the smearing generated by the excavation work.
  2. Loosening the bottom of the excavationLoosen the bottom to a depth of 20 cm without turning over the soil. Keep a firm central base directly beneath the location of the root ball to prevent the tree from sinking under its own weight.
  3. Topsoil backfillingInstall an aerated soil mixture conforming to agronomic requirements, in successive layers watered to saturation to eliminate air pockets without using mechanical compaction.

Adjust the altimetry of the root collar and stabilise root anchorage

The root collar constitutes the morphological transition zone between the root system and the trunk. Its altimetric positioning determines the immediate survival of the specimen. A root collar buried a few centimetres beneath the arable soil rots due to asphyxiation of the cambium and promotes the emission of unwanted suckers. Conversely, a raised root ball exposes upper roots to rapid desiccation from wind and solar radiation.

After placing the soil mixture, the substrate undergoes residual expansion that resolves during the first heavy waterings. The landscaper adjusts the root collar using a mason's straightedge and an optical level between 3 and 5 cm above the finished kerb or lawn. During the natural settlement of the loose soil, the whole assembly drops to stabilise precisely flush with the finished ground level.

During the first three years of rooting, the root ball must not undergo any shearing movement under the action of dominant winds. The breakage of newly formed rootlets compromises the plant's water uptake. Two main methods ensure this mechanical anchorage depending on available space and desired aesthetics:

  • Bipod or tripod overhead staking: peeled wooden stakes with a diameter of 8 to 10 cm, pointed and driven into the ground outside the volume of the root ball so as not to pierce the fine root system. The stakes are connected to the trunk by adjustable flexible straps equipped with anti-friction spacer pads.
  • Underground root ball guying: installation of rot-proof flat straps enclosing the root ball, anchored at the bottom of the pit to cross-timbers or fixed by driven mechanical anchors. This invisible solution is preferred for pedestrian areas or neat urban alignments.
  • Overhead cable guying: three metal or textile strands secured to the upper third of the trunk via protective sleeves and fixed to the ground on angled mooring stakes outside the pedestrian traffic area.

Useful soil volume and agronomic reconstitution according to professional standards

When pricing landscaping work, the supply of plants often represents only a marginal fraction of the overall expense. The real cost of a tree lies in the earthworks, the removal of sterile spoil and the supply of structured topsoil. A specimen planted in a cramped excavation, modelled on the dimensions of its root ball, exhausts its reserves in three seasons before withering or stagnating in irreversible stunting. The professional association JardinSuisse advocates loose soil volumes capable of guaranteeing water retention and root colonisation over the long term.

Dimensioning the topsoil volume according to the vigour and species of the plant
Future tree growthStem girth at delivery (circumference)Useful volume of loose soilUseful soil depthGround exploration area
Small growth (small-canopy trees, fruit trees)12/14 to 14/16 cm4 to 6 m³60 to 70 cm6 to 8 m²
Medium growth (secondary street trees)16/18 to 20/25 cm8 to 10 m³70 to 80 cm10 to 12 m²
Large growth (oaks, plane trees, park beeches)25/30 cm and above12 to 20 m³80 to 100 cm15 to 20 m²
Multi-stemmed shrubs and large multi-trunk specimensHeight 300 to 450 cm8 to 12 m³70 to 90 cm10 to 15 m²

The soil profile must be reconstituted in successive layers without excessive mechanical compaction using heavy machinery. The backfill soil combines sieved topsoil free from coarse stones, amended with approved matured compost and, in the case of heavy soil or a draining verge, a sandy or pozzolanic mineral fraction. To preserve gas exchange within the root mass, the useful depth must never exceed one metre: feeder roots concentrate in the top sixty centimetres. Multiplying the width of the pit rather than its depth remains the fundamental technical rule to promote the radial anchorage of shallow roots.

Staking systems, root ball anchorage and long-term guying

The immediate mechanical stability of a freshly transplanted specimen directly conditions its root establishment. Any rocking movement caused by gusts of wind shears the tender developing rootlets and detaches the root ball from its soil base. The selected retaining device must immobilise the base while allowing slight flexing of the upper third of the trunk, which is essential to stimulate the natural production of lignin and strengthen the trunk against wind loads.

  • Monopod or bipod staking: reserved for light stems in sheltered situations. Peeled wooden stakes of chestnut or pine treated without creosote are driven in with a sledgehammer outside the volume of the root ball, angled against prevailing winds, and connected to the stem by flexible spacer straps equipped with nailed spacers.
  • Tripod or quadripode staking: standard recommended by standard SIA 318 for specimens of girth 16/18 to 25/30 in exposed areas. The three poles are secured together by cross-pieces nailed at the top, holding the trunk in the centre using braided textile ties or reinforced cellular rubber collars installed with controlled clearance.
  • Underground root ball anchorage: preferred solution on grassed surfaces, residential parks and paved courtyards. The system incorporates steel anchor plates or driven angles at the bottom of the excavation, connected by rot-proof straps and ratchet tensioners placed over the wire-basket root ball, beneath an invisible ten-centimetre finishing layer.
  • Adjustable overhead guying: essential for large multi-stemmed specimens and large standard trees with a girth greater than 30/35. Three to four galvanised steel cables under protective rubber sheathing are fixed at mid-height of the crown and connected to the ground on mooring stakes driven in at 45°, equipped with watertight screw turnbuckles to compensate for metal slackening.

The connection between the framing timber and the bark requires constant care during project handovers. Rigid attachments using bare wire or untreated hemp rope cause destructive strangulation of the phloem by the second growing season. The contractor uses flat polypropylene straps at least 40 millimetres wide, fixed in a loose figure-eight shape to eliminate any direct abrasive friction. The creation of a peripheral watering basin, set at the outer plumb line of the stakes and not against the stem, channels water volumes towards the rootlets while isolating the root collar from stagnant moisture.

Management of non-conformities, unforeseen settlements and planting rectification

On site, major defects noted during planting handover almost always stem from differential settlement of the substrate or a confined root volume. If the excavation bottom has been over-excavated without prior compaction or if the imported topsoil collapses under the first settling watering, the specimen sinks inexorably. A root collar buried a few centimetres below the finished level deprives the bark of oxygen and leads to the formation of cankerous necroses or the dieback of the foliage from the second growing season onwards.

  1. Observation and rapid uncovering of the root collarAs soon as root ball subsidence appears after topsoil settlement, clear the surface by hand until uncovering the base of the primary structural roots. If the sinking exceeds five centimetres, complete lifting of the specimen with its root basket is required using flat slings to wedge a dense bedding layer beneath the root ball.
  2. Radial widening of the useful volumeWhen the initial pit has been undersized due to unforeseen obstacles, loosen the walls with a skeleton bucket or a crowbar over at least an additional half-metre of radius. Incorporate a transition layer mixing the site soil with the prescribed organic substrate to break the smearing of the excavation flanks.
  3. Adjustment and resetting of stakesIn the event of a lean resulting from loose straps or an anchorage torn out by the wind, re-tension the guy lines or reinstall a self-supporting tripod. The flexible textile strap clamping collars must maintain the axis of the trunk without strangling the bark or rubbing against the wood of the chamfered stakes.

Rectifying a failing planting represents a double expense for the company compared to a pit correctly calibrated from the initial earthworks. Professional guidelines issued by JardinSuisse and the requirements of landscaping standards impose an establishment guarantee based on strict compliance with soil porosity and root aeration. Facing a rocky or asphyxiating subsoil, recording in writing the need for an expanded soil supply protects the contractor's liability.

Frequently asked questions

What volume of topsoil must be provided for a street tree or park tree?

For a first-size standard tree, professional recommendation advises a minimum useful soil volume of twelve to fifteen cubic metres. For second-size specimens or in constrained situations, a volume of six to eight cubic metres constitutes the critical survival threshold. Without this loose space guaranteeing access to water and mineral elements, the plant withers and stagnates prematurely, rendering any curative watering ineffective.

Why must the tree's root collar imperatively be flush above the finished ground?

The root collar marks the morphological transition zone between the underground root system and the aerial trunk. Buried under soil or mulch, the bark undergoes permanent maceration due to lack of oxygen, which promotes the establishment of wood-decaying fungi and leads to root asphyxiation. During planting, the top of the root ball should be positioned two to three centimetres higher than the natural ground to compensate for the inevitable settlement of the loose backfill.

When should underground root ball anchorage be favoured over bipod or tripod staking?

Root ball anchorage using biodegradable straps or steel strapping anchored to foundation grids is favoured in heavily frequented public spaces or neat landscaped developments. It avoids visual clutter and eliminates the risk of bark damage through friction. Conversely, in sites highly exposed to wind corridors or on steep slopes, external staking using debarked guyed wood ensures better mechanical recovery during storms.

What are JardinSuisse's requirements regarding the plant establishment guarantee?

According to JardinSuisse professional practices, the establishment guarantee covers the first growing season following planting. This guarantee only applies if the pit excavation work, the agronomic quality of the soil mixture and the staking supplies comply with good practice. The contractor is released from liability if the client neglects regular maintenance watering during hot spells or in the event of proven vandalism.

Texts and standards cited

  • norme SIA 318External works and green spaces
  • Directives JardinSuisseProfessional practices and establishment guarantee conditions for nursery and landscape work

In the same section