Skip to content
Website
🧱 CFC 273Section 3 of 610 chapters

Door acoustics: seals and thresholds: the execution reference

In interior joinery, the certified sound reduction of a door set collapses as soon as air flows under the leaf or around the frame perimeter. This section details practical methods for adjusting automatic door bottoms, setting the compression of rebate seals and treating the junctions with the structural work. It is aimed at foremen, team leaders and site managers who need to deliver measurable acoustic performance that meets contractual requirements.

  • 10chapters
  • 22 000words
  • 6sections in the training course
  • 60chapters in total

Key values to remember 4

norme SIA 181

2 to 5 dB

Usual reduction margin between the laboratory value Rw and the in-situ measured value R'w

art. 367 CO

60 days

Legal period within which the client must report defects after delivery of the work

norme SIA 343

0 mm

Ideal threshold step to guarantee both accessibility for persons with reduced mobility and acoustic closure

norme SIA 343

2 mm

Maximum permissible level difference under the leaf to maintain a sealed contact of the drop seal

Joiner's scope of work and sealing interfaces

The field of interior joinery (CFC 273) covers the supply, fitting and installation of internal door sets, acoustic entrance doors to dwellings, fire-rated elements and bespoke fittings. Within the scope of airborne sound insulation governed by standard SIA 181, the joiner's responsibility applies exclusively to the closing element: the leaf, its frame, its compression ironmongery, its rebate gaskets and its door-bottom device. The airtight connection between the subframe and the structural work is an integral part of the installer's execution work, because an unsealed air gap destroys the sound reduction value of the whole assembly.

The boundaries of each trade's services must be drawn rigorously from the preparation of the construction site. The sound reduction index of the receiving partition depends on the plastering and drywall work (CFC 271), which must provide a reinforced frame and compliant airtight linings. External joinery and façade doors fall under windows (CFC 221), while structural metal thresholds or added barriers are the responsibility of building metalwork (CFC 274). Under art. 365 CO, the joiner has a duty to report immediately to the site management any irregularity in the substrate, in particular an uneven rough screed or a cracked frame opening, that could compromise the acoustic sealing required by standard SIA 343.

  • Items under the responsibility of CFC 273: acoustic leaf, frame, door lining, elastomer rebate gaskets, retractable automatic door bottom, flat Swiss threshold and sealant for the installation joint.
  • Items excluded from CFC 273: surface mass and decoupling of the plasterboard partition (CFC 271), driving-rain-tight façade thresholds (CFC 221), sanding of finished floor coverings (CFC 283).
  • Systematic point of vigilance: the continuity of the high-density flexible sealing between the frame and the wall before the finishing cover strips are fitted.
Drop seal (automatic door bottom)
Mechanical device recessed into the lower groove of the leaf, comprising a movable aluminium profile fitted with a flexible elastomer lip. When the door is closed, a side push-button comes into contact with the frame jamb, causing the lip to lower in parallel against the floor to block the passage of air.

Reading method and logic of technical progression

Achieving acoustic performance on the construction site tolerates no improvisation. The ten chapters of this section form a progressive course, designed to guide installation teams from the initial geometric check through to final acceptance of the work. The approach structures the technical analysis around three critical phases: setting the mechanical sealing components, assessing the interactions with the surrounding building, and finally tracking down defects during joint measurements.

  1. Components and direct mechanical adjustmentsChapters P3-01 to P3-04 address the universal weak point of door sets: the bottom of the leaf. You will learn how to set the drop of the drop seal, ensure sealing continuity in the rebate corners and combine sound insulation with accessibility without a protruding threshold.
  2. Architectural integration and specific programmesChapters P3-05 to P3-08 extend the analysis to flanking transmission through lightweight partitions, to the strict specifications of hotels and business offices, and to the industrial constraints of technical doors subjected to high sound pressures.
  3. Durability, measurement and dispute resolutionChapters P3-09 and P3-10 deal with the ageing of synthetic rubbers and provide a methodical investigation protocol to correct insufficient insulation before the deadline for notification of defects.

During the final inspection, the difference between the laboratory test value and the in-situ acoustic measurement is the main source of disputes with the project consultants. This difference generally stems from a lack of understanding of flanking transmissions or from a minute deformation of the leaf due to the humidity gradient. In the event of a complaint made under art. 367 CO, mastery of this methodical protocol makes it possible to identify the exact origin of the decibel loss, to isolate the share attributable to the joiner's installation and to rectify the gaskets without having to replace the door set destructively.

📘 Chapters in this section 10

Door acoustics: seals and thresholds

Noise travels through the bottom: ventilation gap, threshold and real sound insulation

Pinpoint the air leak under the leaf to stop the collapse of the overall acoustic rating.

Door acoustics: seals and thresholds

The guillotine seal: adjustment, continuous contact on the threshold and wear

Set the travel of the automatic mechanism to ensure uniform sealing without jamming the lock.

Door acoustics: seals and thresholds

Rebate seals: correct compression, corner continuity and slamming doors

Fit continuous sealing gaskets at the corners without stiffening the door slam or forcing the strike plate.

Door acoustics: seals and thresholds

The threshold: acoustics versus accessibility, permitted step and retractable solution

Reconcile step-free passage for persons with reduced mobility with the acoustic sealing required at floor level.

Door acoustics: seals and thresholds

When it is not the door: transmission through the partition, the installation gap and the duct

Detect hidden acoustic bridges in the hollow frame and defective sealing of the partition.

Door acoustics: seals and thresholds

Hotels and offices: requirement by use, heavy-core door and double seal

Choose the leaf-and-frame assembly suited to the strict requirements of hotel rooms and meeting rooms.

Door acoustics: seals and thresholds

Measuring in place: element installed versus element tested in the laboratory, and the normal difference

Anticipate the unavoidable loss of decibels between the laboratory test certificate and the installed work.

Door acoustics: seals and thresholds

Plant room: heavy door, complete seal and the weakness that remains

Lock down the acoustic leaks of a massive technical door without creating excessive resistance to opening.

Door acoustics: seals and thresholds

Seals wear out: service life, simple check and replacement by the operator

Plan the periodic inspection and replacement of crushed elastomers to maintain the initial performance.

Door acoustics: seals and thresholds

Missing sound insulation: diagnosis in sequence, corrective measures and when to replace the door

Follow a step-by-step protocol to locate the deficient sound reduction before any destructive remedial work.