Skip to content
Website
🧱 CFC 273Section 6 of 610 chapters

Workshop, machines and wood dust: the execution standard

Intended for workshop managers, foremen and fitters in wood finishing work, this section details the control of the mechanical and health risks linked to wood machining. It brings together the operating rules complying with the requirements of art. 82 LAA and art. 3 OPA for sawing, moulding, sanding and handling without endangering the health of operators, whether at the fixed bench or directly on fit-out construction sites.

  • 10chapters
  • 22 000words
  • 6sections in the training course
  • 60chapters in total

Key values to remember 4

SUVA directives

2 mg/m³

Average occupational exposure limit value for inhalable wood dust

SUVA directives

85 dB(A)

Daily noise exposure threshold requiring the wearing of suitable hearing protection

SUVA directives

25 kg

Indicative maximum load for manual carrying of a panel by one adult operator

SUVA directives

20 m/s

Minimum recommended air velocity in extraction ducts to avoid deposits

Technical scope of the joiner: workshop manufacturing and fit-out installation

Machining solid wood, wood-based panels and interior fit-out elements directly exposes the worker to serious cuts, inhalation of fine particles and musculoskeletal disorders. Daily practice demands strict discipline on fixed machines as well as on portable power tools. This section deals exclusively with the collective and individual technical protective measures specific to interior joinery work, interior or entrance doors, and fit-outs according to the CFC 273 standard. It formalises the settings of safety devices, the airflow efficiency of extraction networks, the handling of chemical additives and the management of the flows of material to be processed.

Methodologically, this section focuses on operational safety, dust control and damage prevention. The assessment of a dimensional defect, remedial quotes or measurement disputes are dealt with in the section devoted to tenders.

Logical progression: from mobile tools to overall workshop control

The course of ten chapters follows the natural organisation of the production flow: from the initial cutting machines to the clearing of the construction site and the overall management of the risks of the production room. Methodical implementation guarantees the physical integrity of the team and compliance with Swiss accident prevention directives.

  1. Cutting machines and immediate extraction (P6-01 to P6-04)Learning begins with the plunge saw on a guide rail and the direct interlocking of air extraction. It continues with the health-related treatment of wood dust, a material officially classified as carcinogenic. The guiding rules for the panel saw and the bridge guards for the spindle moulder and the thicknesser then secure the most vulnerable machining operations.
  2. Working environment and diffuse health risks (P6-05 to P6-06)The management of physical nuisances examines continuous noise exposure in order to curb irreversible occupational deafness. The chemical section then analyses the airflow essential to booths for applying contact adhesives, resins and polyurethane varnishes.
  3. Clean construction sites and heavy handling (P6-07 to P6-08)Off-site machining in occupied premises requires containment enclosures and rigorous dust-removal protocols. In parallel, the handling of large-format panels and armoured door units is optimised by the systematic use of lifting beams, suction lifters and lifting trolleys to prevent lumbar injuries.
  4. Management of by-products and prevention of major incidents (P6-09 to P6-10)Strict selective sorting separates recoverable natural wood from melamine-faced or impregnated panels, on pain of environmental penalties. Finally, the monitoring of bag filters and silos and the complete shutdown protocol eliminate the risks of ignition and deflagration of fine sawdust at the end of the shift.

📘 Chapters in this section 10

Workshop, machines and wood dust

The plunge saw: riving knife, rail, kickback and the hand that never passes in front

Master guided plunge cuts without ever exposing your hands to violent blade kickback.

Workshop, machines and wood dust

Wood dust: classified as carcinogenic, interlocked extraction and mask

Neutralise carcinogenic wood particles with interlocked extraction and certified respiratory protection.

Workshop, machines and wood dust

The table saw: guard, push stick, fence, and the cut you never make by hand

Secure your panel cutting with an adjusted riving knife, blade guard and suitable push stick.

Workshop, machines and wood dust

Spindle moulder and surface planer: guards, jigs and short workpieces

Machine short pieces of wood on the spindle moulder and thicknesser by applying the mandatory machining guards.

Workshop, machines and wood dust

Workshop noise: actual levels, exposure duration and occupational deafness

Protect your hearing against the noise from cutter blocks and extraction units.

Workshop, machines and wood dust

Adhesives and varnishes: booth ventilation, awareness and storage

Remove toxic solvent and varnish vapours through the airflow settings of your booth.

Workshop, machines and wood dust

On-site machining: connected saw, partitioning and cutting outdoors

Cut cleanly at your clients' premises without polluting the indoor air through containment and extraction.

Workshop, machines and wood dust

Carrying panels: actual weight, suction cups, trolley and two-person work

Spare your back when unloading dense panels by using suitable handling aids.

Workshop, machines and wood dust

Sorting wood: solid timber, glued panels, treated wood and separate disposal routes

Separate solid wood, glued panels and treated wood effectively to comply with Swiss disposal channels.

Workshop, machines and wood dust

Fire in the workshop: accumulated dust, extraction silo and end of the working day

Prevent fire and dust explosion at the silo through rigorous end-of-shift maintenance.