Skip to content
Website
🧱 CFC 212Section 3 of 610 chapters

Decking, access, and collective protections: the execution standard

Intended for team leaders, site foremen, and scaffolding erectors, this section details the rigorous implementation of working platforms and collective protections. It brings together the essential execution criteria to ensure continuous decking, safe access, and guardrails compliant with current Swiss requirements.

  • 10chapters
  • 22 000words
  • 6sections in the training course
  • 60chapters in total

Key values to remember 5

art. 22 OTConst

100 cm

Minimum height of the upper edge of the top rail above the decking

art. 22 OTConst

15 cm

Minimum height of the retaining toeboard at the deck edge

art. 22 OTConst

47 cm

Maximum vertical opening permitted between guardrail components

art. 26 OTConst

80 cm

Minimum overrun of the top rail above the highest fall edge

OTConst

2 m

Free-fall height from which a peripheral guardrail is required

Technical scope and intervention boundaries

Erecting a facade scaffolding meets a strict obligation: to provide a stable workstation and ensure collective protection against falls from height. This guide is aimed directly at practitioners who assemble, modify, and maintain these structures. It deals exclusively with components specific to the temporary structure: aluminium or solid timber platforms, guardrail frames, toeboards, cantilever brackets, and construction site stair flights.

Every installed component must prevent voids from opening under the feet of users or at platform edges. Decking compliance strictly prohibits excessive gaps, cantilever tilting hazards, and the failure to lock platform decks in place. Lateral protections, meanwhile, must withstand horizontal thrusts without yielding, while retaining accidental falls of tools towards lower levels or the public domain.

Working platform components and preventive roles
Scaffolding componentMain functionTechnical requirement
Flush deckingTraffic and support surfaceContinuity without play or tilting
Top railFall arrest for personsMinimum height of 100 cm
Intermediate railProtection of intermediate voidsMaximum spacing of 47 cm
Edge toeboardRetention of tools and debrisMinimum height of 15 cm
Access towerSafe vertical circulationLandings and prefabricated flights

Layout logic and reading path

Progression through the ten chapters follows the logical sequence of professional erection in the field. Training begins with securing the outer edges before addressing the compactness of the working platform, followed by the vertical distribution of workers. This methodical approach ensures that each step relies on a structure previously stabilised and made safe for the erectors.

  1. 1. Mastering the peripheral guardrailChapters E3-01 and E3-02 set the mandatory dimensions for the top rail, intermediate rail, and toeboard, as well as strict overrun rules at the level of the uppermost working platform.
  2. 2. Building a flawless working platformChapters E3-03 to E3-05 address gapless deck installation, management of stair flights in relation to service trapdoors, and deployment of inside widening brackets.
  3. 3. Protecting surroundings and roof interfacesChapters E3-06 and E3-07 detail catchment devices for walkways, the installation of protective debris fans, and fall protection for tinsmiths at pitched roof edges.
  4. 4. Operating and securing the structure in serviceChapters E3-08 to E3-10 address heavy handling, anchoring hoists or material lifts, and maintenance instructions in the face of winter weather.

Rigorous application of these data sheets ensures acceptance of work without reservations and prevents construction site shutdowns ordered by inspection bodies. For complete service load specifications or anchor calculations under high wind exposure, erectors should refer to standard SN EN 12811 and federal directives governing occupational safety.

📘 Chapters in this section 10

Decking, access and collective protection

Scaffolding guardrail: height, intermediate guardrail, and toeboard

Master the exact dimensions of the protective three-part assembly to ensure an impassable scaffolding edge.

Decking, access and collective protection

Extension of the top guard rail above the top platform: the rule and its two cases

Adjust top rail height based on the distance to the wall to protect roofers.

Decking, access and collective protection

Complete decking: no missing deck, no play, no seesaw effect

Eliminate dangerous gaps and lock every bay to remove any tipping hazard.

Decking, access and collective protection

Accessing scaffolding: stairways, integrated ladders and trapdoors to close

Select vertical circulation suited to the construction site and eliminate the hazard of open trapdoors.

Decking, access and collective protection

Extension bracket: gain width on the facade side without losing protection

Extend the platform as close as possible to the external face without compromising lateral fall protection.

Decking, access and collective protection

Falling objects above a passageway: fan, toeboard and safety netting

Combine protective fans and netting to secure pedestrian routes beneath working areas.

Decking, access and collective protection

Tinsmith bracket and catch scaffolding: protecting roof edges

Erect a catchment system capable of stopping a slide dead on a pitched roof slope.

Decking, access and collective protection

Opening decking to hoist materials: protecting and reclosing the opening

Organise temporary vertical openings without ever exposing workers to an unprotected opening.

Decking, access and collective protection

Hoists on scaffolding: added load, reinforced ties and landing area

Transmit lifting loads to the correct standards without compromising the stability of the structure.

Decking, access and collective protection

Slippery decking: snow, ice and rubble on platform decks

Implement proper snow clearance and grit spreading to keep traffic routes fully non-slip.