Skip to content
Website
🧱 CFC 212Handover, periodic inspections and documentsChapter 6 of 10 in the section

Who has the right to erect: required training, supervision and certificate

Erecting facade scaffolding cannot be improvised with unqualified personnel. This chapter specifies the professional skills required by SUVA directives and the Construction Work Ordinance, the exact nature of supervision by a competent person on the construction site, as well as the certificates and supporting documents to be systematically presented in the event of an inspection.

Key takeaways

  • A loaned labourer cannot participate in the erection without prior training and direct supervision.
  • Directing the erection requires a competent person capable of giving instructions to workers.
  • The use of personal fall protection equipment requires formally certified practical training.
  • Training and instruction certificates must be kept immediately available on the construction site.

Scaffolder qualification and strict limits for auxiliary personnel

On a Swiss building construction site, assembling tubular structures or prefabricated frames is the domain of scaffolding professionals. Integrating a labourer or a temporary worker loaned for the day raises strict requirements: the person must possess the physical fitness and basic knowledge of the system deployed. SUVA directives and the Construction Work Ordinance require that workers be instructed on the specific risks related to fall hazards, handling loads at height and manufacturer-specific bracing methods.

According to art. 82 LAA, to prevent occupational accidents and diseases, the employer shall take all measures shown by experience to be necessary, applicable according to the state of technology, and adapted to the given conditions; workers shall assist the employer. In erecting facade scaffolding, this implies that every worker masters the use of their harness, the mobile anchor point technique and progressive erection with temporary erection guardrails. A worker without a recognised certificate or attestation may under no circumstances work autonomously at height.

Competence levels required according to the function on the scaffolding construction site
FunctionMinimum required trainingAuthorised tasks on the structure
Supply labourerBasic instruction on construction site risksStorage, sorting on the ground, hitching to hoisting winches.
ScaffolderCertified basic training or validated practical experienceAssembly of components, laying platforms, routine ties.
Team leader or qualified scaffolderCertificat fédéral de capacité or recognised equivalentSetting out, directing operations, checking ties.
Designated competent personIn-depth training in technique and safetyAcceptance of the work, periodic inspection, sign-off.

Technical supervision on site and supporting documents required during inspection

The presence of personnel in training or support workers requires continuous surveillance. Art. 5 OTConst provides that on every construction site, the employer designates a competent person responsible for occupational safety and health protection, who is in a position to issue directives to workers. This competent person must have the technical knowledge necessary to interpret the manufacturer's assembly instructions, evaluate the bearing capacity of the base ground and check the distribution of wall ties as height increases.

  1. Verification of individual certificatesBefore deployment, the supervisor ensures that each scaffolder holds their training certificate for wearing a safety harness and working at height in accordance with SUVA directives.
  2. Checking fitness and workplace instructionThe competent person provides initial instruction regarding the chosen scaffolding system, the bracing sequence and permissible load capacities.
  3. Active surveillance of erection operationsSupervisors ensure the actual wearing of a safety helmet with a chinstrap and absolute compliance with the prior installation of guardrails before accessing upper platforms.
  4. Maintaining the safety fileProof of training, erection plans and inspection reports are gathered so they can be consulted on site without delay.

The lack of these supporting documents exposes the company to an immediate halt of erection operations ordered by the inspection body. If an unqualified labourer is caught assembling bays without direct supervision or documented training, the scaffolding cannot be the subject of any valid acceptance. Administrative compliance of competencies is the indispensable prerequisite for technical compliance of the finished work.

SUVA directives and implementation of safe erection

The erection of facade scaffolding tolerates no operational improvisation in the field. SUVA directives and Swiss safety regulations impose a strict assembly method where every technical action guarantees the collective stability of the structure before any vertical progression. Engaged workers must master the installation sequence of components, the systematic locking of wedges on tubular standards, as well as the immediate fixing of bracing diagonals.

From a regulatory perspective, art. 82 LAA provides that the employer shall take, to prevent occupational accidents and diseases, all measures shown by experience to be necessary, applicable according to the state of technology, and adapted to the given conditions. Workers shall assist the employer, notably by using protective equipment. At the working face of the scaffolding, this means an assistant without specific training may not handle frames or approach the fall hazard edge without direct and continuous supervision.

  1. Verification of the ground bearingArrangement of timber sole plates beneath adjustable screw jacks to compensate for ground slopes and guarantee a stable base without subsidence.
  2. Installation of the first bay and levellingErection of base jacks, base frames and ledger rails with rigorous spirit level checks along all three axes before tightening connections.
  3. Elevation and installation of the advance guardrailInstallation of the protection device for the upper level before any installation of working decks and toeboards.
  4. Systematic anchoring into the masonryDrilling, plugging and screwing tie eyebolts connected to the inner standards as height increases, according to the manufacturer's anchoring pattern.

Compliance check and documentary traceability

During an inspection conducted by SUVA or the cantonal labour inspectorate, compliance of the team and the structure is established by the immediate production of supporting documents. In accordance with art. 5 OTConst, the employer designates on every construction site a competent person responsible for occupational safety and health protection, who is in a position to issue directives to workers. The site manager or foreman must be able to prove that technical supervision is ensured on site by this qualified person.

Documents and supporting records to present during a scaffolding inspection
Inspected itemFormal supporting documentOn-site verification
Personnel qualificationCertificat fédéral de capacité as scaffolder, federal certificate or certified training passportMatch between the identity of scaffolders on the scaffolding and the certificates presented
Technical supervisionWritten designation of the competent person according to art. 5 OTConstActual presence of the competent person capable of giving operational orders
Construction site safety measuresSafety and health protection plan drawn up by the employerApplication of safe erection methods and compliant use of equipment
Acceptance of the workInitial inspection report and duly completed scaffolding notice boardVisible display at access point: inspection date, permissible load, signature of the competent person

If a temporary labourer loaned or made available participates on the construction site, their scope of action remains strictly limited to unloading at the work base, sorting components and supplying materials at ground level. Under no circumstances may this worker climb into upper bays to assemble standards or install structural ties. The lack of a recognised professional qualification certificate or specific training certificate exposes the construction site to an immediate stoppage of work ordered by the inspection body.

Management of team non-conformities and emergency measures

When a construction site inspection reveals the presence of an unqualified worker assigned to erection, or the absence of a qualified technical supervisor to direct the team, the foreman or site manager must intervene without delay. Art. 5 OTConst requires the employer to designate on every construction site a competent person responsible for occupational safety and health protection, who is in a position to issue directives to workers; any person who, through their conduct or condition, exposes themselves or endangers other persons must be dismissed from the construction site.

  1. Immediate stoppage of erectionStop the progress of the structure immediately. Have unqualified personnel descend from upper levels and lock off access points with a passage prohibition sign.
  2. Securing the bay in progressHave the remaining qualified scaffolder install the essential guardrails, bracing and temporary ties to ensure the overall stability of the structure before leaving.
  3. Audit of components already installedThe competent person conducts a full re-examination of standards, decks, diagonals and ties handled by the uncertified worker before any resumption of work.
  4. Formal notice to the subcontractor or agencyNotify the temporary employment agency or subcontractor in writing of the removal of the untrained temporary worker and demand immediate replacement with a scaffolder holding the appropriate certificate.

Deliberate negligence directly engages line management. Art. 229 CP provides that whoever, in directing or executing a construction or demolition work, intentionally breaches the recognised rules of the trade and thereby knowingly endangers the life or physical integrity of persons shall be liable to a custodial sentence not exceeding five years or a monetary penalty; if acting through negligence, to a custodial sentence not exceeding three years or a monetary penalty.

Frequently asked questions

Can a mason erect the scaffolding on their own construction site?

No. Even if experienced in structural work, a mason cannot assemble facade scaffolding with a fall height exceeding two metres without holding a recognised scaffolder qualification or documented specific training. SUVA directives and the Construction Work Ordinance reserve these erection, modification and structural tying tasks for specifically trained personnel working under the supervision of a competent person designated for safety.

What documents must a temporary scaffolder carry?

A temporary scaffolding erector must be able to present immediately an official identity document and their recognised training certificate, such as the Certificat fédéral de capacité or the trade's basic course certificate. The foreman also keeps a copy of their mission contract specifying their exact professional qualification on the construction site, in order to respond without delay to requests from labour inspectors or SUVA experts.

What task can be assigned to a labourer without scaffolding training?

An auxiliary worker or unqualified labourer must strictly remain on the ground or in a fully secured area. Their role is limited to logistical handling: unloading lorries, sorting components in the ground storage area, preparing timber packing, supplying frames, decks or tubes, and securing parts to hoisting winches. They are strictly prohibited from working on the non-accepted structure or installing ties.

Who is liable in the event of an accident involving a temporary worker?

Primary liability lies with the host employer directing the work on the construction site. The team leader and site manager answer for the deployment of personnel to high-risk posts and the prior verification of competencies. The temporary employment agency is also liable if it assigned a labourer to a qualified post without verifying their technical certificates. Deliberate breaches expose parties to the penalties provided for by federal law.

Texts and standards cited

  • OTConst art. 5organisation of occupational safety and health protection: on every construction site, the employer designates a competent person responsible for occupational safety and health protection, who is in a position to issue directives to workers (para. 1); any person who, through their conduct or condition, exposes themselves or endangers other persons must be dismissed from the construction site (para. 2).
  • CPbreach of the recognised rules of building: whoever, in directing or executing a construction or demolition work, intentionally breaches the recognised rules of the trade and thereby knowingly endangers the life or physical integrity of persons shall be liable to a custodial sentence not exceeding five years or a monetary penalty; if acting through negligence, to a custodial sentence not exceeding three years or a monetary penalty.

In the same section