Skip to content
Website
🧱 CFC 250Tests, claims and the installer's safetyChapter 4 of 10 in the section

The forgotten fitting: proof of the defect, civil liability and recourse

A fitting that is merely pushed home inside a closed service shaft can hold for several weeks before giving way under mains pressure. Faced with seepage that ruins the parquet floors and ceilings of the lower storeys, the plumber must master the classification of the execution defect, the preservation of material evidence and the activation of their civil liability insurance in order to contain claims for loss of use.

Key takeaways

  • Material proof rests on the joint preservation of the fitting and the examination of the pressing rings.
  • SIA 118 governs the time limits for the notice of defects from the moment the first traces of damp appear.
  • The company's civil liability insurance compensates consequential damage to finishes but excludes the repair of the fitting itself.
  • Rehousing costs and rental loss of use often represent the heaviest financial share.

Joint inspection record and technical proof of the unpressed fitting

In a sanitary distribution installation using multilayer or stainless steel pipe, forgetting to press a fitting is one of the most dangerous traps for the fitter. During the initial filling and the low-pressure tightness tests, the elastomer O-ring sometimes provides a precarious seal by simple mechanical friction. The service shaft is then closed up with lightweight fire-rated partitions or plasterboard. Once the cold or domestic hot water network is finally put into service, pressure variations, micro water hammers and thermal expansion eventually push the pipe out of its socket. The leak rate quickly reaches several tens of litres per minute right inside the riser shaft.

As soon as water starts to flow, the foreman's absolute priority is to freeze the technical situation without altering the disputed elements. The shaft should be opened, if possible, in the presence of the site management and the client. To establish proof of the execution defect, the section must be cut on either side of the displaced zone without altering the geometry of the socket. The absence of a jaw imprint on the stainless steel ring, or an intact, unbroken plastic indicator ring, immediately demonstrates that the pressing step was omitted.

  • Take macro photographs from several angles before any mechanical cutting.
  • Check the pipe insertion depth against the visual stop mark.
  • Seal the disputed fitting and draw up a record of findings signed by the parties.
  • Calibration record and cycle history of the portable electric pressing tool used in the area.

Under SIA 118, an unpressed fitting concealed in a masonry shaft is a latent defect that could not have been detected during the ordinary inspection of the work. The client's rights in the event of defects in the work, including rectification and repair of damage, are set out in accordance with art. 368 CO. The two-year warranty period provided for by SIA 118 allows the client to report the defect as soon as it is discovered, giving rise to a claim against the installation company.

Triggering civil liability and covering chain-reaction damage

Water escaping from a riser in a service shaft does not stay confined to the level of the incident. It seeps along slab penetrations, passes through poorly sealed fire barriers and accumulates on floating screeds. By capillary action, the moisture reaches the acoustic insulation beneath the screed and soaks the glued parquet floors of the apartments below. The timber boards lift within hours, while suspended plaster ceilings become saturated with water before partially collapsing under the load.

Consequential damage items and the usual allocation of cover
Damaged itemType of work requiredInsurance cover concerned
Sanitary fitting and pipeCutting out, supplying a coupling and pressingAt the installer's own expense
Shaft and lightweight partitionsDestructive opening, drying and rebuildingCompany's civil liability
Screeds and insulation under the floor slabDrilling for dry-air injection and dehumidificationCompany's civil liability
Solid parquet and joineryComplete removal, disposal and replacement with newCompany's civil liability
Occupants of the dwellingsTemporary hotel accommodation or rehousingCivil liability (loss of use)

Warranty handling falls under art. 371 CO, which provides a five-year limitation period for defects in a building work. When the claim is reported, the company's civil liability insurance formally distinguishes the plumber's own work from consequential damage caused to the work of others. Repair of the defective fitting remains excluded from the basic contract and stays at the plumber's expense. By contrast, the civil liability insurer covers water damage to parquet floors and paintwork, as well as the invoices of the technical drying specialists.

The SIA 118 regime and classification of the unpressed fitting

In a sanitary water distribution installation, forgetting to press a multilayer or metal fitting concealed in a closed service shaft is the most devastating loss scenario for the installer. During the initial filling or temporary filling of the construction site, the sealing gasket may hold precariously by simple mechanical adhesion under moderate service pressure. Once the building enters continuous use, water hammer caused by the rapid closing of mixer taps and the temperature rise of the domestic hot water eventually push the pipe out. Water then flows at full rate inside the riser shaft, whether masonry or clad in plasterboard, with no immediately visible obstacle.

Enforceability of the claim rests on formal proof of the execution defect. To clear their liability or limit the claims of the site management, the plumbing installer must be able to produce their pressure test record drawn up in accordance with the guidelines of the Swiss Society of the Gas and Water Industry. A test carried out with water only, without prior testing with compressed air or inert gas, does not always reveal a coupling that is merely pushed on when the inner ring temporarily sticks under hydrostatic pressure. The joint expert examination ordered after the flood records the physical state of the fitting: no deformation of the pressing beads on the stainless steel sleeve, no marks left by the jaws of the pressing tool, and intact guide O-rings.

  • Preservative removal of the disputed fitting and pipe section under seal, in the presence of the insurance experts, to avoid any accusation of tampering with evidence.
  • Compliance check of the company's tooling: presentation of the annual service certificates of the electro-hydraulic pressing tool and verified compatibility between the jaws and the fitting profile.
  • Review of the site diary and self-inspection sheets certifying the controlled cutting before the plasterer-painter's final closing of the fire-rated shafts.

Insurance recourse, compensation for consequential damage and loss of use

As soon as the fitting fails, water seeps into the slab openings, rushes under the floating screeds by capillary action and migrates horizontally through the mineral wool or polystyrene acoustic insulation. The laminated or solid parquet floors of the lower dwellings buckle as the wood fibres swell, while the partition walls absorb moisture from their base. The client's property insurer or the cantonal building insurer covers the emergency rescue measures, then immediately exercises its right of subrogation against the sanitary installer's operational and professional civil liability insurance.

Allocation of liability and classification of losses in a fitting failure inside a shaft
Item of damageNature of the lossCover arrangementDirect impact for the installer
Defective fitting and pressingDirect damage to the contractor's own work (work performed)Excluded from company civil liability cover (Code of Obligations)Full rectification at the plumber's sole expense
Soaked parquet, screeds and finishesMaterial consequential damage to third-party worksCovered by company civil liability insurance after recourse by the injured party's insurerPayment of the contractual excess by the installer
Technical drying by turbinesRescue and damage mitigation costsCovered by the company's civil liability policyImpact on the policy's claims record
Emergency rehousing and loss of rentImmaterial consequential damage (loss of use)Covered according to the scope of the clauses in the civil liability policy taken outRisk of a direct claim by the client for financial loss

Compensation for loss of use is frequently the heaviest financial item in water damage in a multi-unit rental building or condominium ownership. The impossibility of occupying the dwellings during the noisy technical drying phase forces the landlord to rehouse the residents in serviced apartments or to grant them a full rent reduction for several months. If the installer's civil liability contract contains restrictions on purely financial losses, or a cover limit that is insufficient for consequential immaterial damage, the client will claim the remainder from the company's own funds as compensation for the damage under the Code of Obligations. Rigour in the intermediate pressure test remains the only technical safeguard against this cascade of claims.

What to do in a major loss: arbitration, evidence and handling of recourse

When a fitting that was only pushed home gives way in a riser inside a closed shaft, pressurised water spreads vertically through the slab penetrations. The flooding ruins the acoustic insulation, screeds and parquet floors of the apartments below. Faced with heavy financial loss, the plumbing installer must react methodically in order to control the drying, freeze the material findings and protect the position of their insurance company.

  1. Shutting off the network and preservative samplingIsolate the riser without modifying the fittings in place. Cut out the pipe section with a wheel pipe cutter, keeping sufficient length on either side of the fitting. Keep the unpressed socket intact and photograph from several angles the condition of the plastic stop ring and the pipe depth markings.
  2. Passing on the notice and summoning the insurerNotify the installation company's civil liability insurer promptly. Within the framework of SIA 118, acknowledge receipt of the notice of defects sent by the site management, prudently reserving examination of the causes. No personal financial commitment must appear in the initial letters from the foreman or the company management.
  3. Joint inspection record and limiting the damageTake part in the joint visit with the insurance expert and the client before any destructive removal of joinery or linings. Approve the installation of absorption dehumidifiers to stop the capillary migration of water into the skirting boards and to limit the temporary accommodation costs invoiced as loss of use.

The financial dispute regularly centres on the extent of the repairs demanded by the injured parties, including the complete removal of glued solid parquet or the emergency rehousing of occupants. To face these very costly items, the plumbing company must produce its daily self-inspection sheets and its certificates of network pressurisation. Even if forgetting to press the fitting is a manifest execution defect attributable to the fitter, the final amount of compensation will depend on the exact allocation made by the experts between direct damage to the work and consequential indirect damage.

Frequently asked questions

Who pays the rehousing costs of a tenant whose parquet has buckled?

Temporary accommodation costs are consequential damage linked to the deprivation of use of the dwelling. As a rule, the owner's property insurance or building insurance advances these amounts to secure the occupants, before taking recourse action against the plumbing installer responsible for the leak. The final settlement is then negotiated with the plumbing company's civil liability insurer, provided the hotel or temporary lease receipts are scrupulously documented.

Does the pressure test record release the installer if an unpressed fitting leaks later?

No. An unpressed fitting can temporarily withstand an initial hydrostatic test thanks to the static adhesion of its O-rings, before slipping under the effect of water hammer or thermal expansion. The test record only proves that the check took place at a given moment. Under SIA 118, the company remains liable for latent installation defects discovered later during the warranty period.

How should you react if the site management demands immediate rectification at the installer's expense?

The installer must repair the defective sanitary pipe without delay in order to stop the damage at source. However, for restoring the parquet, plaster or false ceilings, they must not sign any purchase order on behalf of third-party companies. They formally pass the claim to their professional civil liability insurer, who will appoint an expert to assess jointly the real extent of the repairs required and to quantify the loss.

What should be done with the pipe section and the unpressed fitting after the repair cut?

The leaking fitting and the adjacent pipe segments are the decisive material evidence in the dispute. The installer must cut out the whole assembly without disturbing the socket joint, then photograph the part from different angles in the presence of the site manager. The component is then packed in a sealed bag and carefully kept at the company's technical office until the insurance expert's visit, since its deterioration or loss would weaken any later technical defence.

Texts and standards cited

  • norme SIA 118General conditions for the execution of construction works

In the same section