Skip to content
Website
🧱 CFC 272Exterior painting: facade, timber and metalChapter 3 of 10 in the section

Timber outdoors: stain or paint, south-facing exposure, and the maintenance you announce

On exterior façades, solar radiation and moisture put timber under severe strain, particularly on south- and south-west-facing elevations. This chapter details the degradation mechanisms of stains, paints and saturators, sets out the real service lives by orientation according to SIA 257, and shows how to formalise maintenance cycles contractually with the client to prevent any dispute.

Key takeaways

  • Facing due south, no transparent stain lasts more than three to four years without preventive maintenance.
  • Opaque microporous paint offers the best UV protection thanks to the mass concentration of its pigments.
  • The non-film-forming saturator eliminates the risk of flaking but requires regular refreshing every two years.
  • SIA 257 makes the durability of the treatment conditional on written planning of the maintenance cycles.

Solar radiation and moisture: the real durability of finishes according to orientation

On south- and south-west-facing façades, timber is subjected to extreme physical and climatic stresses. Ultraviolet radiation breaks down the surface lignin, turning the substrate into a powdery base unable to hold a film, while daily temperature swings cause constant dimensional shrinkage and swelling. On dark timber, the surface temperature can reach 70 °C in midsummer. Faced with these repeated stresses, no serious manufacturer or applicator can promise ten-year performance without intervention. The choice between stain, paint or saturator directly determines the nature of the ageing and the method of later refurbishment.

Types of exterior timber finishes
According to SIA 257, three main families are distinguished: the saturator or impregnating oil, which penetrates the timber without creating a surface film; the translucent microporous stain, which forms a film of variable thickness leaving the grain visible; and the opaque microporous paint, which deposits a continuous, highly pigmented coating that completely blocks solar radiation.

The mechanical behaviour of timber also depends on its level of dimensional stability. Dimensionally stable components, such as window frames or engineered shutters, accept medium-build stains or microporous paints. By contrast, rough-sawn cladding, ventilated soffits and decking boards, which are subject to large moisture variations, quickly reject rigid films. On these highly mobile elements, thick films blister and flake from the first year of south-facing exposure, letting run-off water penetrate under the protective film, which traps moisture and accelerates the rot beneath.

Observed durability cycles before first renovation according to exposure in Switzerland
System appliedSouth / South-westWind-driven rain, westEast / North
Impregnating saturator (non-film-forming)1 to 2 years2 to 3 years3 to 4 years
Thin-build fluid stain2 to 3 years3 to 4 years4 to 5 years
Medium-build intermediate stain3 to 4 years4 to 5 years5 to 6 years
Opaque microporous paint5 to 6 years6 to 7 years8 to 10 years

Pigment loading is the real shield against photochemical degradation. A colourless or very light stain does not contain enough metal oxides to filter ultraviolet light, causing the underlying timber to grey quickly. On south-facing exposure, only medium to heavily pigmented shades ensure adequate retention. West orientation, for its part, combines the low afternoon sun and the onslaught of wind-driven rain, promoting the leaching of biocidal agents and the appearance of blue stain if the film loses its resistance to liquid water.

Framing maintenance contractually to defuse warranty disputes

A persistent misunderstanding opposes clients and applicators over the warranty on exterior painting work. Many clients confuse the liability period for latent defects with a promise of aesthetic performance without maintenance. Yet SIA 257 specifies that finishes applied to exterior woodwork are wearing coats subject to unavoidable natural ageing. Without regular preventive maintenance, the progressive degradation of the film is not an application defect, but the foreseeable consequence of local environmental attack.

  1. Phase 1: Formalising the interval in the offerEnter the theoretical service life per façade in the descriptive quote. State in writing that, facing due south, a visual inspection every two years and a maintenance coat at three years are indispensable to maintain the integrity of the system.
  2. Phase 2: Handing over the maintenance log at acceptanceAt the end of the works, record the exact reference of the products applied, the colour numbers, the manufacturer's technical data sheets and the precise instructions for gentle cleaning with clean water, without a high-pressure washer.
  3. Phase 3: Proposing a periodic maintenance contractPropose a scheduled inspection agreement. A visit every two years makes it possible to treat the first signs of wear with a simple light sanding followed by a refresher coat, avoiding heavy and costly stripping back to bare timber.

Setting up a formalised maintenance contract enhances the craft business's expertise while building lasting customer loyalty. Economically, intervening preventively with refresher coats on a still-sound substrate costs three to four times less per square metre than a full refurbishment after complete flaking requiring sanding and priming. By systematically recording these technical recommendations in writing in the contract documents in line with Swiss professional guidelines, the foreman protects his company against unjustified claims and ensures the technical preservation of the built heritage.

Comparative behaviour: saturator, stain and microporous paint

On a south- or south-west-facing façade, timber is subjected to extreme thermal and moisture stresses. Daily thermal shocks, combined with ultraviolet radiation and wind-driven rain, cause rapid alternation of dimensional swelling and shrinkage. Faced with these stresses, the choice of binder and the water-vapour permeability dictate the way the finish degrades. According to SIA 257, painting work on exterior timber must provide durable surface protection while allowing the substrate to balance its internal moisture without the film lifting.

Non-film-forming system
Impregnating treatment or fluid saturator that penetrates the cell structure of the timber without forming a continuous surface membrane, thus avoiding any risk of blistering or flaking during dimensional changes.
Technical comparison of timber finishing systems according to surface stresses
Finishing systemDry film thicknessMain ageing modeComplexity of restoration
Saturator or impregnating oil0 µm (pure penetration into the pores)Chalking, uniform greying and surface drying-outLow: simple gentle cleaning then direct reapplication without sanding
Thin- or semi-thick-build stain15 to 35 µm depending on the number of coatsCracking under UV stress and micro-cracking along the grainMedium: careful light sanding mandatory, local sanding of delaminated areas
Opacifying microporous paint60 to 100 µm in a three-coat systemLoss of gloss, slow chalking or blistering if moisture is trappedHigh: full mechanical or thermal stripping in case of extensive blistering

The saturator creates no surface film. Expansion stresses therefore cannot mechanically lift it, which eliminates the risk of flaking. In return, the absence of a dense physical barrier exposes the pigments to rapid leaching and to erosion under the direct action of rain. The transparent or semi-transparent stain, for its part, lets part of the solar radiation through: the underlying lignin is gradually burnt by ultraviolet light, causing the film to lose adhesion from beneath. The opacifying microporous paint offers the best shield against ultraviolet thanks to its saturated mineral pigmentation, but traps moisture if the water content of the timber exceeds the permissible values at the time of application or in the case of infiltration through mitre joints.

Intervention interval and recorded maintenance protocol

The longevity of a treatment depends directly on the orientation of the façade section, the roof overhang and the slope of the timber elements. Announcing ten-year performance on south-facing cladding amounts to technical deception. To preserve the work without forcing the client to fund heavy stripping, the painter draws up a realistic preventive maintenance schedule from the tender stage. This document records in writing the intervention cycles required for each façade of the building.

Real maintenance intervals according to orientation and the system chosen
Façade orientationSaturatorTinted stain (thin build)Opaque microporous paint
Due south / South-west (strong sunshine, bad weather)12 to 24 months3 to 4 years5 to 7 years
East (moderate morning sunshine)2 to 3 years4 to 6 years7 to 9 years
North (constant shade, high residual moisture)3 to 4 years6 to 8 years8 to 10 years
  1. Annual inspection visitVisually check the condition of sharp edges, horizontal bearing surfaces and drip areas where water stagnates. Check for the appearance of cracking or early chalking on boards exposed to overhead radiation.
  2. Gentle surface cleaningDust off and wash with clean water and a neutral detergent to remove organic deposits and atmospheric pollution that promote the growth of micro-organisms under the film.
  3. Regeneration coatApply a refresher coat of the original product before the film is broken through to bare timber. This coat feeds the substrate or restores the sacrificial thickness of the protective film.

The maintenance contract formalises this relationship over the long term. It schedules the craftsman's regular visits to carry out light interventions at controlled cost, avoiding deep deterioration of joinery or roof-frame timber. Where the client refuses to set up such follow-up, explicit mention of the risks of rapid flaking facing due south must be included in the written reservations of the acceptance record, protecting the company against any unjustified later claim.

Protocol for handling claims and remedying premature degradation

When the film of a stain blisters or a paint flakes prematurely on a south- or west-facing gable, the dispute almost always concerns the confusion between an execution defect and a lack of maintenance. The absence of a signed maintenance protocol puts the painter in an awkward position against the usual warranty rules. Faced with a claim for rapid deterioration, the craftsman must proceed methodically with an analysis of the defects before taking any position.

  1. Technical survey on site and test pointsMeasure the residual moisture content of the timber with a pin-type moisture meter in several sound and degraded areas. Record the residual dry film thickness, the drainage condition of the sills, the opening of shrinkage cracks and the adhesion of the substrate by cross-cut test in line with professional recommendations.
  2. Checking the design conditionsCheck that the work complies with the rules of the trade and with SIA 257: radius of rounded sharp edges greater than two millimetres, minimum ground clearance to avoid water splashback and the presence of effective rear ventilation of the cladding preventing the trapping of interstitial moisture.
  3. Drawing up the joint inspection recordRecord the factual findings in writing: absence of the prescribed annual cleaning, excessive mechanical or thermal attack, leaching by weather not compensated for. If the architectural design or the lack of care is the client's responsibility, propose a costed restoration outside the warranty.
  4. Mechanical stripping and refurbishment of the systemSand the delaminated areas completely back to sound bare timber, neutralise resin pockets, re-prime the substrate with a fungicidal, regulating impregnating primer, then apply two coats of pigmented microporous finish, explicitly agreeing a shortened contractual maintenance interval.

The settlement of a dispute on exterior timber rests on the traceability of the technical warnings given at handover. If the maintenance notice was handed over against a written receipt and the planned inspection intervals were not respected by the owner, the degradation is normal wear under severe exposure, releasing the applicator from refurbishment work without additional payment under the principles of the contract for work of the Code of Obligations (CO).

Frequently asked questions

Why is a colourless stain not recommended on cladding exposed due south?

A colourless stain does not contain the mineral pigments needed to screen out ultraviolet rays. Under strong south-facing exposure, this radiation passes through the transparent film and destroys the surface lignin of the timber within a few months. The substrate fades, turns grey and loses its mechanical cohesion. The protective film eventually blisters and flakes through lack of adhesion, requiring complete stripping back to sound timber before any new treatment.

Can an opaque paint be applied over a saturator applied a few years earlier?

Direct application of a film-forming paint over a residual oil or saturator is prohibited because the fatty substances prevent the film from adhering. The substrate must first be cleaned with a neutral degreasing soap or a suitable oil remover, rinsed abundantly at low pressure and left to dry. Careful sanding with a medium grit then opens the pores of the timber and allows checking for the absence of residual water repellency before applying the opaque microporous system.

What is the permissible moisture content of timber before applying a stain or paint?

According to SIA 257, the maximum moisture content of the timber substrate must not exceed fifteen per cent for stable joinery such as windows, and eighteen per cent for elements of limited dimensional stability such as exterior cladding. Above these thresholds, measured with a pin-type moisture meter, the water trapped under the film evaporates under the action of spring or summer sun, causing internal stresses, immediate blistering and widespread lifting.

How do you justify a shorter maintenance cycle on a south façade to a client?

The painter relies on building physics: the south face undergoes the most violent daily temperature swings, combined with the peak of ultraviolet solar irradiation. The timber continually expands and contracts, fatiguing the elasticity of the binder much faster than on the north side. Recording this reality in writing from the quote, with a maintenance schedule differentiated by façade, protects the craftsman against accusations of poor workmanship when refurbishment occurs after three seasons.

Texts and standards cited

  • SIA 257Painting, varnishing and wallpapering on timber and other substrates

In the same section