Roofer safety, snow and roof maintenance: the execution reference
Safety on pitched roofs imposes strict requirements for fall protection and for preventing risks linked to weather or fragile materials. This section is aimed at team leaders, foremen and site managers, to organise the safety of personnel on pitched roof slopes and to deliver work that meets the requirements for subsequent maintenance. It details anchoring rules, personal protective equipment and the preparation of maintenance instructions.
- 10chapters
- 22 000words
- 6sections in the training course
- 60chapters in total
Key values to remember 4
2 m
Minimum fall height requiring protective measures at the roof edge
60°
Maximum roof pitch for working without an elevating work platform or scaffolding on the slope
100 cm
Minimum height of the top rail of a perimeter guardrail
15 cm
Minimum height of the toe board at the bottom of the guardrail
Scope and limits of this section
This section covers all the safety, handling and prevention rules that apply when working on pitched roofs. It deals with slope-specific restraint systems, protection of third parties at the foot of the building and anticipation of the future maintenance of the roof covering. The specific issues linked to pitch, fragile sheets, adverse weather conditions and the risk of asbestos are addressed directly to construction site supervisory teams.
To respect the boundaries of the trade (CFC 224), perimeter collective protection equipment fixed to the roof structure or to the ground remains assigned to the respective trades concerned. Thus, the erection of façade scaffolding and sheet-metal worker's catch scaffolds falls under CFC 212. Likewise, waterproofing work on flat roofs or terraces remains exclusively assigned to CFC 226, and load-bearing timber structural elements to CFC 214.
Organisation of the chapters and reading method
The progression through the ten chapters follows the chronological and operational course of a pitched roof construction site, from the assessment of access to the handover of the work to the client.
- Assessment of the slope and anchorages: Determination of restraint systems suited to the pitch, sizing of lifelines, calculation of the clearance distance and checking of safety hooks.
- Management of fragile and hazardous materials: Safe movement near fibre-cement or synthetic sheets and detection of the presence of asbestos on older structures.
- Handling and protection of the public highway: Distribution of loads on the battens, use of material hoists and marking out of the ground-level zone to protect third parties.
- Bad weather and stopping work: Operational criteria for withdrawal in the face of wind, rain and frost, and emergency procedures for sheeting over after a storm.
- Maintenance instructions and handover of the work: Drafting of safety instructions and inspection frequencies for the owner, for subsequent interventions.
| Slope pitch | Protective equipment required | Operational constraints |
|---|---|---|
| Up to 60° | Sheet-metal worker's catch scaffold, perimeter guardrail or PPE against falls | Installation of certified anchorages and checking of the clearance distance |
| Above 60° | Scaffolding or mobile elevating work platform | Rope work on the slope prohibited without a dedicated platform |
📘 Chapters in this section 10
Working on the roof slope: how pitch changes the protection required
Select the fall arrest system suited to the exact pitch of the roof structure.
Roofer safety, snow and roof maintenanceRoof lifeline: sized anchorages, fall clearance and pendulum effect
Calculate the clearance distance and avoid the pendulum effect for safe roof anchoring.
Roofer safety, snow and roof maintenanceFragile materials on roofs: translucent sheets, fibre-cement and falls through the roof
Prevent the risk of falling through translucent sheets and weakened fibre-cement.
Roofer safety, snow and roof maintenanceSafety hooks: positioning, anchoring and periodic inspection
Install and periodically check safety hooks to ensure the restraint of workers.
Roofer safety, snow and roof maintenanceWind, frost and wet roofs: the conditions in which we come down
Set weather thresholds for deciding to interrupt work and clear the roof.
Roofer safety, snow and roof maintenanceHoisting materials onto the roof: tile hoists, pallets and load distribution
Distribute bundles of tiles on the battening and secure the material hoist on the slope.
Roofer safety, snow and roof maintenanceProtecting the street below the construction site: canopy, cordoning and working hours
Set up ground-level marking and canopies to protect pedestrians.
Roofer safety, snow and roof maintenanceOld fibre-cement sheets: suspected asbestos and immediate stop of work
Identify suspect old fibre-cement sheets and apply the immediate stop procedure.
Roofer safety, snow and roof maintenanceRoof maintenance manual: what is inspected, how often, and who may go up
Draft clear maintenance instructions setting the frequency of inspections and authorised access.
Roofer safety, snow and roof maintenanceAfter the storm: emergency tarping, securing the site and recording the damage for the insurer
Organise emergency securing and sheeting over after a storm safely.
