Skip to content
Website
🧱 CFC 274Balustrades: height, infill and complianceChapter 9 of 10 in the section

The handrail: grippable section, clearance from the wall, continuity and returns

This chapter details the execution rules for a handrail that complies with Swiss requirements. You will learn how to select a profile that guarantees an effective grip, how to set the clearance from the rough or finished wall surface precisely, and how to make safe end returns that prevent clothing or forearms from catching.

Key takeaways

  • A tubular profile of forty to forty-eight millimetres guarantees optimal closing of the palm around it.
  • The clear space between the finished wall and the handrail must be at least fifty millimetres.
  • Continuity of the profile across landings avoids breaks in support along evacuation routes.
  • A closed return towards the masonry eliminates the risk of clothing getting caught and of injuries.

Calibrating the profile and providing wall clearance according to SIA 358

On a finishing-work construction site, the handrail is the first means of arresting a fall in the event of a misstep in a stairwell or along a ramp. Fitting an eighty-millimetre-wide flat bar or a sharp-edged blade on the grounds of architectural intent is a major technical error. An effective handrail must allow the fingers to close completely around the profile, so that the user's grip strength can be mobilised without requiring excessive extension of the tendons of the hand.

Anatomical grip
Ability of the fingers and thumb to wrap completely or mostly around a metal section in order to provide direct mechanical resistance when balance is lost.

The SIA 358 standard sets the framework for guardrails and protective elements. To ensure this function of continuous support, the geometry of the profile must have a controlled size. Circular sections remain the standard reference on the Romandy market, offering the same comfort whatever the angle of grip. For rectangular or oblong profiles, the upper edges must necessarily have a chamfer or a significant rounding radius to avoid any shearing effect under a sudden dynamic load.

Common handrail sections in metalwork according to use
GeometryExternal dimensionsMinimum thicknessGrip assessment
Round tube, raw steel / powder-coatedDiameter 42.4 mm2.0 mmOptimal for all users
Round tube, stainless steelDiameter 48.3 mm2.0 mmVery good closing firmness
Oval or oblong profile40 x 50 mm2.0 mmExcellent ergonomic hold
Square or rectangular tube40 x 40 mm (R3 radii)2.5 mmAcceptable if edges are softened

The other critical dimension is the distance between the inner face of the tube and the finished face of the wall. If this gap is insufficient, the user's hand hits the render or the concrete, which prompts pedestrians to loosen their grip or prevents the passage of a gloved hand. The metalworker must systematically deduct the thickness of the internal perimeter insulation, the plasterboard lining or the ribbed render before fabricating the fixing brackets in the workshop.

Ensuring continuity of guidance and making the end returns in the workshop

A handrail must not stop abruptly at intermediate landings when the staircase turns. In superimposed flights, mechanical and visual continuity allows a visually impaired person or a person with mobility difficulties to keep their reference without letting go. Corner connections are made with bent elbows or welded mitres, carefully ground and polished to remove any burr likely to injure the palm during a continuous slide.

  • Continuity around the stairwell using bent returns of constant radius.
  • Fixing the brackets from below the tube so that the upper edge remains completely clear.
  • Joints between sections assembled with internal sleeves fitted before welding on site.
  • Flush grinding without concavity at the joints of stainless steel tubes.

The treatment of starts and finishes is the critical point of passive safety. Leaving a tube end open or simply closed with a flat flush plug creates a formidable trap: a bag strap, a jacket sleeve or a lanyard can catch on it during descent, causing an immediate loss of balance and a violent fall down the flight of steps.

  1. Horizontal extensionExtend beyond the last riser by about thirty centimetres along the horizontal landing to steady the user before the end of the effort.
  2. Bending of the returnDirect the tube towards the masonry with a ninety-degree elbow, or towards the floor with a closed downward return.
  3. Abutment finishPlace the return less than twenty millimetres from the finished wall, or weld it directly to a blind anchoring rosette.

Wall fixing and maintaining the grip clearance on rough or finished walls

The geometric compliance of a handrail does not end with the shaping of the parts on the workbench. On the construction site, the main difficulty lies in maintaining the free clearance between the metal profile and the wall after the wall coverings have been applied. A handrail fixed too close to the wall surface prevents the fingers from wrapping firmly; the user then merely slides the palm flat over the top, which cancels any restraining function in the event of a stumble.

To guarantee the free space prescribed by SIA 358, the metalworker must measure the projection of the brackets from the planned finished face and not from the rough wall. Structural work execution tolerances, masonry out-of-plumb and the variable thickness of renders or acoustic linings frequently reduce the passage space by several centimetres if the anchorage is installed without preventive shimming.

Influence of the type of wall substrate on bracket geometry
Wall substrate encounteredCovering thickness to compensateAnchor bracket arrangementRisk if neglected
Exposed reinforced concrete0 mm (direct finish)Standard straight rod, 75 mm centre distanceImmediately compliant clearance, subject to flatness
Brick masonry with render15 to 25 mm depending on the interior plasterOffset plate or long rod with threaded sleeveWall clearance reduced below 40 mm, fingers getting trapped
Lining on plasterboard framework60 to 100 mm of insulation and facingThrough-fixing to a heavy structure or metalworker's reinforcementPull-out under load or bending reducing the usable clearance
External perimeter insulation120 to 200 mm of insulation under renderThermally broken anchor bracket anchored in the structural workCrushing of the render and loss of alignment of the rail

Ergonomics also requires care in how the handrail is attached to its support. The connection between the gooseneck and the underside of the tube must be made without sharp edges or protruding fixings. If the palm or fingers hit a poorly deburred clamp or a protruding lug during the continuous sliding of the hand, the gripping reflex is compromised.

Continuity of guidance, angle connections and anti-snag geometry of end pieces

To fulfil its safety role in a flight of stairs or on a ramp, the handrail must form an uninterrupted guide from one end of the circulation route to the other. Breaks in guidance force the user to look for a new support in mid-movement, which sharply increases the danger of losing balance, particularly for people with reduced mobility or in a panic situation.

  1. Accurate survey of slopes and landingsSetting out on the construction site takes into account the actual walking line and the exact levels of the stair nosings in order to maintain a constant support height of between 900 and 1000 mm measured vertically.
  2. Adjustment of angles and bendsChanges of slope between the flight and the intermediate landing are handled with bent elbows without facets or welded mitres, ground and polished to the same grain as the material to eliminate any rough transition.
  3. Welding or sleeving of the sectionsThe assembly of the site sections is carried out with tightly fitted internal sleeves or with a peripheral weld ground flush with an angle grinder, guaranteeing a constant diameter without any perceptible step.
  4. Forming the end-of-run returnEach free end receives a 90-degree bent return towards the wall or towards the floor, continuously welded and closed to eliminate any risk of a sharp, piercing edge.

The treatment of the ends is a direct physical safety requirement. A tube cut square and closed with a simple flat plug or a welded washer is an aggressive projection. When going down a staircase, a jacket sleeve, a bag shoulder strap or an equipment lanyard can catch on it instantly, throwing the user forward down the flight.

In the case of free-standing open guardrails where the balustrade does not reach the wall, the return is made as a closed scroll towards the bottom rail or the sub-rail, forming a closed loop with no pinch point. This passive safety requirement eliminates the metal hook effect and mechanically stabilises the end of the guardrail against the horizontal service loads prescribed by SIA 358.

Remedying grip non-conformities and handling wall clearance defects

On finishing-work construction sites, the most common dispute concerns failure to respect the clear gap between the profile and the finished wall. When the plasterer or the painter applies an excess thickness of plaster, or when an acoustic lining not shown on the execution drawings is added, the net clearance can drop below the recommended 50 mm, or even below the critical threshold that prevents the passage of the fingers. A profile whose diameter exceeds 50 mm, or whose flat shape prevents the thumb and index finger from closing around it, is a direct non-conformity with the requirements of SIA 358. In this configuration, the gripping element loses its status as a restraining aid and is systematically rejected by the site management or the bpa safety delegate.

  • Issue a written notice to the site management as soon as a reduction in the wall clearance caused by another trade is noted.
  • Prohibit any makeshift fix with improvised shimming under the rosettes: uncalculated overhangs weaken the mechanical fixing in the substrate.
  • Replace wall brackets that are too short with made-to-measure rods, threaded or welded in the workshop, guaranteeing a net clearance of 50 mm.
  • Rework straight or blind ends by welding bent returns turned towards the wall or the post to eliminate snagging edges.

In the case of an unsuitable section delivered to site, such as a raw wide flat metal bar without a rounded gripping edge, grinding the edges is never enough to validate the installation. The metalworker must remove the non-compliant sections and fabricate a continuous tubular handrail, ideally 40 to 45 mm in diameter, or an oval profile guaranteeing a firm grip without risk of slipping. If the starts or finishes of the stairs have open ends, the modification is made by adding TIG-welded elbows, sanded flush, finishing against the masonry with a maximum gap of 5 mm, thus avoiding the catching of bag straps or clothing.

Frequently asked questions

What should be done if insulating lining reduces the wall clearance after the supports have been fixed?

If the installation of a lining reduces the usable clearance below the 50 mm threshold, the metalworker must issue a written notice to the site management. The correction requires dismantling the short supports in order to fit brackets with extended rods, chemically anchored in the underlying load-bearing substrate. No makeshift shimming under the plate is tolerated, as it compromises the rigidity of the anchorage and its resistance to the horizontal loads imposed by the standards.

Why is a flat or overly wide profile rejected for a handrail?

According to SIA 358, the handrail must provide an effective guiding and restraining function in the event of a fall. A flat section that is too wide, a square profile exceeding 50 mm or an angular shape prevents the fingers from completely encircling the material. The user slides without being able to lock the wrist. Only round tubes of 35 to 50 mm or anatomical oval profiles allow a secure reflex closing of the hand.

How should the end return be designed to prevent clothing from catching?

A tube cut square at the end is a formidable trap for clothing, straps or bags, and risks causing a loss of balance in the stairwell. The metalworker must close the end with a bent elbow or a 90-degree return directed towards the wall or towards the load-bearing post. The abutment gap must not exceed 5 mm, eliminating any gap capable of catching a sleeve or a shoulder strap as users pass.

Must the handrail remain uninterrupted at stair landings?

In communal staircases or in buildings open to the public, continuity of the grip must be maintained along the whole length of the flight and across the floor landings. Any interruption forces the user to let go of the support during the critical transition phases. The metalworker achieves this continuity with bent connections, fitted sleeves or invisible TIG welds, keeping the upper gripping level constant above the stair nosings.

Texts and standards cited

  • SIA 358Guardrails: safety requirements, grip, clearance and end returns
  • SIA 118General conditions for the execution of construction work: handling notices of defects and acceptance of works

In the same section