Key takeaways
- Dry sanding of a screed releases particularly harmful alveolar fractions of crystalline silica.
- The exclusive use of a class M or H synchronized vacuum cleaner guarantees a constant air flow.
- The extraction skirt on the sander must remain permanently pressed against the mineral substrate.
- The airtight airlock and sealing of ducts prevent dust from spreading throughout the building.
Capture at source: synchronized vacuum extraction and neutralization of crystalline silica
Mechanical opening of a calcium sulphate-based flow screed or keying of a cement screed generates a considerable volume of very fine dust. This dust is not merely a nuisance for visibility or a source of soiling for technical installations: it contains a significant fraction of respirable crystalline silica originating from quartz sands. These microscopic particles penetrate deep into the respiratory tract and cause irreversible lung damage. The Ordinance on the Prevention of Accidents and the Ordinance on Construction Work require the employer to capture pollutants directly at their point of emission to keep ambient air within the health limits accepted by Suva.
Dry sanding requires the use of a heavy sander or a single-disc machine equipped with a flexible peripheral suction skirt. This collar must fit the surface perfectly to prevent lateral air leaks. The efficiency of the extraction relies on the direct connection of this skirt to a synchronized industrial vacuum cleaner. The electrical synchronization starts the suction as soon as the abrasive disc begins to rotate and continues the extraction for a few seconds after the machine stops in order to purge the flexible hose of all residual sediment.
| Dust class | Maximum permeability | Field of application on screed | Filtration requirements |
|---|---|---|---|
| Class L | Less than 1 % | Prohibited for mineral sanding | General dust without specific toxicity |
| Class M | Less than 0.1 % | Anhydrite screeds and standard plaster dust | Automatic filter cleaning and air flow monitoring |
| Class H | Less than 0.005 % | Cement screeds with high quartz content and pure quartz | HEPA terminal filter and emission-free disposal |
For the screed layer's daily work, class M represents the minimum permissible threshold, while class H is mandatory as soon as the screed mix incorporates hard siliceous aggregates or quartz surface hardeners. The vacuum cleaner must imperatively feature an automatic filter cleaning system using reverse air pulses. Anhydrite laitance dust blocks the filter pores within a few minutes of continuous operation; without this autonomous mechanical cleaning, the negative pressure collapses and dust escapes massively under the sanding bell.
Room containment: sealing off air flows and locking access
Even with perfectly calibrated extraction equipment, a volatile fraction escapes the air flow when starting the machine or along skirtings and outer corners. In a calcium sulphate-based flow screed, this ultra-light white dust remains suspended for several hours. If the room is not physically isolated from the rest of the building, the thermal draft of stairwells and air currents spread this abrasive cloud across all floors, hopelessly fouling controlled mechanical ventilation systems, electrical switchboards, or already installed joinery.
- Sealing of technical penetrationsHermetically seal all ventilation grilles, slab pipe penetrations, and vertical technical duct openings using reinforced adhesive tape and thick polyethylene sheeting.
- Installation of the airtight doorFit a reinforced transparent tarpaulin equipped with a robust industrial zipper onto the main access, adjusted to the door frame without leaving any gaps at the threshold.
- Creating a slight negative pressure in the volumePosition a mobile air purifier equipped with absolute filters discharging its filtered flow to the outside of the building to prevent polluted air from leaking into common areas.
- Signage and securing of the zoneDisplay a formal no-entry warning sign on the outside of the tarpaulin specifying the presence of a keying operation and the mandatory wearing of respiratory protection.
The site manager or foreman must strictly prohibit crossing the sanded room for the entire duration of the operations. Work by electricians, plumbers, or plasterer-painters must be rescheduled in this sector. Workers' safety boots carry fine dust onto neighboring slabs and create a very dangerous slippery deposit for pedestrian traffic. The end of the sanding phase does not mark immediate reopening: a sedimentation time of at least two hours is required before carefully vacuuming the surface using the industrial flat brush of the class M vacuum cleaner.
Industrial filtration, synchronized filter cleaning, and airtight bagging
Sanding the skin of a fluid anhydrite screed or the laitance of a cement screed releases a massive volume of highly volatile dust. As soon as the aggregates contain quartz, this dust contains alveolar crystalline silica, which is particularly harmful to the lungs. To eliminate this hazard at the source, the use of a sander connected to a synchronized vacuum cleaner of a suitable class is mandatory right from the start of the work. Electronic synchronization ensures direct synchronization between the tool and the extraction: the rotation of the disc commands the start of the turbine, while its stopping triggers an extraction time delay of a few seconds. This delay clears the residual dust still present in the hose and under the protective cover.
| Class | Permitted use on screed | Collection system | Filtration efficiency |
|---|---|---|---|
| Class L | Basic site cleaning without the presence of quartz | Classic open filter bag (prohibited during sanding) | Retains coarse dust without respiratory protection |
| Class M | Routine sanding of standard cement and anhydrite screeds | Disposable synthetic bag equipped with an airtight flap | Retains mineral dust and crystalline silica |
| Class H | Special screeds with the presence of highly toxic substances | Airtight safety bag with double sealed envelope | Very high efficiency capturing highly pathogenic particles |
The suction collar attached to the sander forms the primary barrier against the escape of particles. Equipped with a crown of flexible brushes matching the irregularities of the screed, it channels the residues towards the extraction. To maintain a constant flow rate, the vacuum cleaner must obligatorily feature automatic cleaning of the filter cartridges. This electromagnetic pulse system continuously cleans the filters without interrupting service, preventing the immediate obstruction caused by the fineness of the anhydrite. Working without automated filter cleaning causes rapid choking of the filter, a drop in negative pressure, and the immediate invasion of the room by a dust cloud.
Flow exclusion regime, airtight containment, and methodical de-containment
The containment of the sanded room embodies the obligations of the OSH ordinance and the ordinance on construction work, which prescribe that the employer must arrange workstations to guarantee workers' health. A screed is never sanded in an space open to traffic. Isolating the zone requires the installation of airtight polyethylene film walls with a zipper on each access, the sealing of ventilation grilles to protect air ducts, as well as the careful caulking of floor openings and technical shafts. Explicit no-entry signs are posted at each entry point.
The rule of the room that must not be crossed must be strictly respected. The movement of craftspeople not equipped with respiratory protective equipment in a room undergoing sanding directly exposes them to the inhalation of crystalline silica particles that float imperceptibly in the air volume. Each door crossing generates turbulence that drives fine dust back into corridors, stairwells, or adjacent rooms that have already been painted. Site management must enforce strict exclusion from the sector during the screed layer's intervention, formally prohibiting access to plumbers, building electricians, and plasterers.
- Static air settling periodDisconnect the sander and empty the suction hose while keeping the turbine running for a few moments. Transfer the equipment to the airlock without shaking the hoses. Keep the room closed during the complete rest period so that the micro-particles of screed fall back to the floor under the effect of gravity.
- Methodical surface finishing vacuumingOnce settling is complete, vacuum the entire screed, peripheral corners, skirtings, and wall bases using the synchronized vacuum cleaner of suitable class equipped with a flat brush nozzle. The use of a site broom and compressed air blow gun is formally banned.
- Airtight dismantling and reopening of the zoneRemove the containment tarpaulins by folding them from the outside inwards to trap the dust settled on the inner face. Pack these soiled films into airtight bags sealed with tape, then remove the signs to hand over the cleaned floor to the subsequent trades.
Extraction failure and containment breach: emergency shutdown protocol
On a calcium sulphate flow screed or traditional mortar site, the detachment of a suction duct, the tearing of the containment plastic sheeting, or the unauthorized opening of a door causes an instant dispersion of mineral flour. This ultra-fine dust, saturated with respirable crystalline silica and sulphate, invades the building's floor openings, technical shafts, and ventilation ducts within a few minutes. The Ordinance on the Prevention of Accidents requires the employer to act as soon as the malfunction is noticed to eliminate the respiratory hazard for all trades.
- Tool shutdown and area withdrawalAs soon as a cloud is visible around the floor sander skirt, the operator switches off the machine via the switch without stopping the extraction unit if it is still running. The operator evacuates the room immediately by closing the airtight airlock, wearing their FFP3 respiratory mask.
- Air flow controlThe team leader shuts down the mechanical ventilation units in the zone and seals the technical duct returns to prevent the plume from spreading to upper floors or already handed-over premises.
- Wet dusting and ban on sweepingAfter minimal sedimentation, the polluted zone is treated exclusively with the synchronized vacuum cleaner of suitable class. Any dry sweeping is formally banned. Wall surfaces, profiles, and frames affected are wiped with a damp sponge with two-bucket rinsing.
The ordinance on construction work prescribes the maintenance of a healthy atmosphere at workstations. If the containment breach has polluted common areas used by other craftspeople, the screed foreman records the incident in the site journal and coordinates decontamination with site management before any reopening of access.
Frequently asked questions
Can sanding residues from an anhydrite screed be swept if the vacuum extraction has failed?
No. Manual sweeping puts the finest fractions of mineral dust and crystalline silica back into suspension. These particles remain floating in the atmosphere for several hours and penetrate deep into the respiratory tract. In the event of a breakdown of the synchronized vacuum cleaner, work must stop until mechanical extraction compliant with standards is resumed or an industrial vacuum cleaner equipped with very high efficiency filters is exclusively used.
Why does screed sanding dust present a hazard related to silica?
Even on a calcium sulphate screed, the sandy aggregates used contain quartz. Dry sanding under the single-disc machine pulverizes these grains and generates respirable crystalline silica. Inhaled repeatedly without collective protection or a suitable respiratory mask, this substance causes irreversible lung damage such as silicosis, as well as a proven risk of bronchopulmonary cancer recognized by Suva and occupational medicine.
What class of vacuum cleaner is prescribed for sanding a floor screed in Switzerland?
Surface treatment and keying work on screeds require class M or H industrial vacuum cleaners equipped with automatic filter cleaning. Class M filters at least ninety-nine point nine percent of mineral dust and is suitable for standard quartz dust from finishing work. The device must imperatively be electrically synchronized with the sander so as to start and stop in a coordinated manner with the cutting tool.
How should a room undergoing sanding be secured to prevent any intrusion?
Access to the room must be physically blocked by an airtight tarpaulin equipped with a zipper or by a rigid closure panel. Explicit signage prohibiting entry without individual respiratory protection equipment must be posted on the door. The screed layer must notify site management during the coordination meeting to neutralize the circulation of other trades in the sector throughout the entire operation.
Texts and standards cited
- OPAMeasures and installations for the protection of workers against hazardous dust
- OTConstMaintaining air quality at workstations and filtering harmful emissions
